SOLAR

The Victron - VE.Bus BMS protects each individual cell of a Victron lithium-iron-phosphate (LiFePO4 or LFP) battery. Each individual cell of a LiFePO4 battery must be protected against over voltage, under voltage and over temperature. Description Each individual cell of a LiFePO4 battery must be protected against over voltage, under voltage and over temperature. Victron LiFePO4 batteries have integrated Balancing, Temperature and Voltage control (acronym: BTV) and connect to the VE.Bus BMS with two M8 circular connector cord sets.The BTVs of several batteries can be daisy chained. Please see our LiFePO4 battery documentation for details.  The BMS will:  Generate a pre-alarm signal to alert of an imminent cell under voltage condition.  Disable inverting in VE.Bus inverters or inverter/chargers via VE.Bus, and disable other loads via the 'Load Disconnect' terminal in the event of a cell under voltage condition.  Disable charging in VE.Bus inverters or inverter/chargers via VE.Bus and disable other chargers via the 'Charge Disconnect' terminal in the event of a cell overvoltage, under temperature or over temperature condition.  The “next generation” VE.Bus BMS V2 has additional features such as:  Remote on/off terminals.  Ability to disable VE.Direct and VE.Can solar chargers via a GX device.  Allowing control of the VE.Bus inverter/charger from multiple devices, like the Digital Multi Control, the VE.Bus Smart dongle and/or a GX device.  Auxiliary power input and output terminals that allow a GX device to remain powered in the event of a system shutdown. Pdf

Read more less

The Victron - VE.Bus BMS protects each individual cell of a Victron lithium-iron-phosphate (LiFePO4 or LFP) battery. Each individual cell of a LiFePO4 battery must be protected against over voltage, under voltage and over temperature. Description The VE.Bus BMS protects each individual cell of a Victron lithium-iron-phosphate (LiFePO4 or LFP) battery. Each individual cell of a LiFePO4 battery must be protected against over voltage, under voltage and over temperature. Victron LiFePO4 batteries have integrated Balancing, Temperature and Voltage control (acronym: BTV) and connect to the VE.Bus BMS with two M8 circular connector cord sets. The BTVs of several batteries can be daisy chained. Please see our LiFePO4 battery documentation for details.  The BMS will:  Shut down or disconnect loads in case of imminent cell under voltage.  Reduce charge current in case of imminent cell overvoltage or over temperature (VE.Bus products only, see below).  Shut down or disconnect battery chargers in case of imminent cell overvoltage or over temperature.  Protects 12V, 24V and 48V systems  The operating voltage range of the BMS: 9 to 70V DC. Communicates with all VE.Bus products The VE.Bus BMS connects to a MultiPlus, Quattro or Phoenix inverter with a standard RJ45 UTP cable.  Other products, without VE.Bus can be controlled as shown below:  Load Disconnect  The Load Disconnect output is normally high and becomes free floating in case of imminent cell under voltage. Maximum current: 2A.  The Load Disconnect output can be used to control  the remote on/off of a load, and/or  the remote on/off of an electronic load switch (Battery Protect)  Charge Disconnect  The Charge Disconnect output is normally high and becomes free floating in case of imminent cell over voltage or over temperature. Maximum current: 10mA.  The Charge Disconnect output can be used to control  the remote on/off of a charger and/or  a Cyrix-Li-Charge relay and/or  a Cyrix-Li-ct Battery Combiner Pdf

Read more less

A simple and low cost alternative to the VE.Bus BMS. The miniBMS can replace the VE.Bus BMS in several applications. It is however not suitable for use with VE.Bus MultiPlus and Quattro inverter/chargers: it has no VE.Bus interface. Description Input Voltage Range: 8-70VDC  Protection Category: IP20  Dimensions: H106 x W42 x D23mm  Weight: 0.1Kg  Warranty: 5 Years A simple and low cost alternative to the VE.Bus BMS The miniBMS can replace the VE.Bus BMS in several applications. It is however not suitable for use with VE.Bus MultiPlus and Quattro inverter/chargers: it has no VE.Bus interface.   The miniBMS is intended for use with Victron Smart LiFePo4 batteries with M8 circular connectors. The miniBMS has two outputs, similar to the VE.Bus BMS.  Pdf

Read more less

The Digital Multi Control panel (DMC) is a remote panel designed to work with all of Victron Energy's Multi & Quattro inverter/chargers (including the Multiplus range). The DMC can remotely turn the Multis or Quattros on or off (or set them to charger-only mode), display the status of the charger and inverter functions and set up to four different AC input current limits (plus one generator input). The Digital Multi Control panel (DMC) is a remote panel designed to work with all of Victron Energy's Multi & Quattro inverter/chargers (including the Multiplus range). The DMC can remotely turn the Multis or Quattros on or off (or set them to charger-only mode), display the status of the charger and inverter functions and set up to four different AC input current limits (plus one generator input). Supplied with a metal bracket and screws for a discrete, flush mounted installation and no visible fixings. Note: An RJ45 UTP (Unscreened Twisted Pair) cable is required for installation (not included).  Features  Turn inverter/charger on, off or set to 'charger-only' operation  7-segment, blue LED display with auto-dimming function at night  Charger status LEDs indicating power and charge stage  Inverter status LEDs indicating power and alarm status  Adjustable AC shore current limit via rotary control knob (upper limit settable)  Adjustable AC input current limit for generator when using external transfer switch   Technical Information Overall dimensions: 120 (W) x 65 (H) x 12 (D) mm  Depth required behind mounting face: 20mm min.  RJ45 socket orientation: Side entry (90° to face of panel)

Read more less

The MK3-USB allows a large selection of Victron products to connect to a computer for configuration and firmware updates. The MK3-USB allows the following products to connect to a computer for configuration and firmware updates:  Multi MultiGrid MultiPlus MultiPlus-II Quattro  Inverter/Charger settings in ECOmulti EasySolar EasyPlus Inverters with a VE.Bus communication port. 

Read more less

Sunshine Pure Sine Wave Inverters are suited for sensitive electronic equipment, allowing motors to run faster, quieter, and cooler, preventing computer crashes, noises & glitches in monitors, TV, game consoles, etc. Convert DC power from your battery into AC power enabling the use of electrical devices. Connect the inverter to your battery, and plug your AC devices into the power inverter to provide a reliable power source whilst on the move. Perfect for caravans, motorhomes, boats & trucks. Description  Sunshine inverters are a very high grade and this product is supplied with heavy-duty leads fitted with terminal rings for easy connectivity to your battery. Numerous uses for off-grid installations large and small, whether it be in the home, outbuildings, caravan, motorhome, car, truck, or boat the Sunshine range of inverters give you a 230V power supply wherever you need it.Sunshine power inverters have the advantages of being compact, lightweight, & low noise, once connected to a 24V battery bank, you get 230V AC directly from the power inverters UK output socket giving you a stable power supply for running your electrical appliances.FEATURES Soft Start USB Port Single AC outlet Over-temperature protection Low battery voltage alarm Low battery voltage shutdown High battery voltage shutdown Overload protection, short circuit protection, polarity reverse connection protection *Optional Extra - Remote On/Off Switch*  Specifications 500W pure sine wave power inverter Output waveform: pure sine wave inverter Continuous power: 500watt Surge power: 1000Watt Input voltage: 20 - 30V DC (24V) Output volt: 230 Frequency: 50Hz Efficiency: >85% Dimension (L*W*H): 235*150*70mm Weight: 1.77KG

Read more less

This Sunshine Solar Flexible ETFE 100W 12V boasts ultra-pure silicon delivering optimal power conversion. The aluminum backing adds massive strength, preventing corrosion and helping with heat dissipation. Thin, light, and when fitted to the roof of a caravan or motorhome very aerodynamic. Lightweight design combined with high-efficiency cells and solar panel flexibility makes our latest ETFE range also perfect for marine use and many more applications where a rigid framed solar panel is not an option. Description With a Sunshine Flexible ETFE 120W 12V solar panel, you could expect to generate around 34 amps per day when used in conjunction with a PWM solar charge controller and 40 amps per day when used with an MPPT solar controller during the summer months. Multiple panels can be connected to acquire higher power if needed.    Solar Panel Specifications Maximum Power (Pmax): 120W Maximum Power Current (Ipm): 6.7A Maximum Power Voltage (Vpm): 18V Short Circuit Current (Isc): 7.2 Open Circuit Voltage (Voc): 21.6V Nominal Operating Cell Temp. (NOCT): -45 to 80°C Maximum System Voltage: DC600V Maximum Series Fuse: 9A Size: 1030 x 665 x 4mm Weight:.3.65 kg  Features 3° flexibility or 3cm per 1m of panel length ETFE rough scratch-resistant surface which can be walked on in deck shoes. Aluminum Substrate Highly efficient monocrystalline cells Can be conveniently placed on slightly curved solid surfaces Can be easily bonded using fixing adhesive (no need for drilling) 4mm Single Core Cable fitted with type MC4 Connectors (length 900mm) One-Year Manufacturers Warranty Please Click PDF to View More Info On The Installation and Maintenance Of This Product.

Read more less

This Sunshine Solar Flexible ETFE 60W 12V boasts ultra-pure silicon delivering optimal power conversion. The aluminum backing adds massive strength, preventing corrosion and helping with heat dissipation. Thin, light, and when fitted to the roof of a caravan or motorhome very aerodynamic. Lightweight design combined with high-efficiency cells and solar panel flexibility makes our latest ETFE range also perfect for marine use and many more applications where a rigid framed solar panel is not an option. Description With a Sunshine Flexible ETFE 80W 12V solar panel, you could expect to generate around 22 amps per day when used in conjunction with a PWM solar charge controller and 27 amps per day when used with an MPPT solar controller during the summer months. Multiple panels can be connected to acquire higher power if needed.    Solar Panel Specifications Maximum Power (Pmax): 80W Maximum Power Current (Ipm): 4.5A Maximum Power Voltage (Vmp): 18V Short Circuit Current (Isc): 4.8A Open Circuit Voltage (Voc): 21.6V Nominal Operating Cell Temp. (NOCT): -45 to 80°C Maximum System Voltage: DC600V Maximum Series Fuse: 9A Size: 720 x 665 x 4mm Weight:.2.20 kg   Features 3° flexibility or 3cm per 1m of panel length ETFE rough scratch-resistant surface which can be walked on in deck shoes. Aluminum Substrate Highly efficient monocrystalline cells Can be conveniently placed on slightly curved solid surfaces Can be easily bonded using fixing adhesive (no need for drilling) 4mm Single Core Cable fitted with type MC4 Connectors (length 900mm) One-Year Manufacturers Warranty Please Click PDF to View More Info On The Installation and Maintenance Of This Product.

Read more less

Our stock monocrystalline 400W solar module is MCS-approved making it suitable for grid-tied PV arrays and eligible for the feed-in tariff. These large solar panels can also be used for battery charging in off-grid systems where larger power requirements are needed typically liveaboard boats, power failure backup systems, static caravans, off-grid home offices, etc.  Suntech 400 Watt Ultra V Mini PERC with Black Frame Tempered glass with an anodised aluminum alloy frame, all black high-performance solar panel. The half-cell technology enables the module to give a higher power output whilst reducing the system cost. With the use of the latest cell connection technology, the length of the current conductors on the solar cell is reduced by 50% in the transverse direction, which also effectively reduces the internal resistance of the solar cell. A smaller distance between the cell connectors significantly reduces the risk of losses through micro cracks and thus increases the reliability of the solar system.  KEY FEATURES: High module conversion efficiency  Front cover: tempered glass, 3.2 mm  Excellent weak light performance - More power output in weak light conditions, such as haze, cloudy, and morning  High PID resistance - Advanced cell technology and qualified materials lead to high resistance to PID  Lower operating temperature - Lower operating temperature and temperature coefficient increases the power output  Withstanding harsh environment - Reliable quality leads to better sustainability even in harsh environments like deserts, farm, and coastline  Extended load tests - Module certified for maximum static test load on the front (6000 Pascal) and maximum static test load on the rear (3800 Pascal) Suntech current sorting process - Up to 2 % power loss caused by current mismatch could be diminished by current sorting technique to maximize system power output  IP68-rated junction box  Standard 15-year product warranty; 25-year performance warranty  SPECIFICATIONS Power Class: 400W Maximum Power Current: (Ipm): 12.83A Maximum Power Voltage: (Vpm): 31.18V Short Circuit Current (Isc): 13.73A Power Output Tolerance (Pmax): 0/+5 Open Circuit Voltage (Voc): 37.04V Nominal Operating Cell Temp. (NOCT): -40 to +85°C Maximum System Voltage: 1500V DC Watts/ m²: 199.5 Cells: 108 Half Cells (6X18 half cells) Frame Colour: Black Module Efficiency (%): 20.5 Connector Type: MC4-EVO2 Compatible Length (mm): 1,724 Width (mm): 1,134 Thickness (mm): 35 Product Weight (Kg): 22 Munich Re Insurance Backed Warranty   In the event that Suntech is not able to honor the warranty, the policy is seamlessly transferred to the registered buyer, ensuring that warranty claims remain covered.  PV Warranty Insurance is designed to increase confidence in the long-term performance and financial attractiveness of PV projects. Munich Re’s PV  Warranty Insurance is the established market standard. All Suntech panels come with the additional Munich Re Warranty, giving you complete peace of mind. What it covers:  The Warranty Risk of Solar:  Insolvency of the manufacturer  Faulty manufacturing  Material defects  Excessive material aging  Munich Re’s PV Warranty Insurance gives you:  Significant risk transfer: high and extendable insurance protection over 25 years  Reliable loss payout: no first-come, first-served situations in claims scenarios  Individualised Buyer’s Declaration Letter issued by Munich Re

Read more less

Our 190W solar panel is the most powerful of the Sunshine Solar range for 12V battery charging if you are looking for faster power generation this solar module will deliver. The high wattage output combined with high-efficiency monocrystalline cells make this solar panel of particular interest for motorhome uses, static caravans, mobile homes, and live-aboard boats where larger power requirements are generally required. With a Sunshine 110W solar panel, you could expect to generate around 31 amps per day when used in conjunction with a PWM solar charge controller and around 37 amps per day with an MPPT solar controller during the summer months. Multiple panels can be connected to acquire higher power if needed.  With an RV130S solar panel, you could expect to generate around 36 amps per day when used in conjunction with a PWM solar charge controller and around 43 amps per day with an MPPT solar controller during the summer months. Multiple panels can be connected to acquire higher power if needed.  Specifications Product Code. RV130S Max Power. 130W ± 3% Max Power Voltage. 18V Max Power Current. 7.2A Open Circuit Voltage. 21.6V Short Circuit Current. 7.8A Normal Operating Cell Temp. -45 to 80°C Max System Voltage. DC1000V Weight. 11 Kg Dimensions. 1513 x 528 x 64mm Features Integrated Streamline Aluminium Roof Mounts 900mm of 4mm single-core insulated cable, fitted with MC Type 4 connectors High-Performance Monocrystalline Cells Factory-fitted aluminium frame with pre-drilled mounting holes Multiple pieces can be connected to acquire higher power Suitable for charging all types of 12-volt batteries Fitted with bypass diodes to minimize the effect of shading Completely weatherproof Guaranteed Performance 5 Years Manufacturers Warranty 10 Years Warranty 90% Power Output 20 Years Warranty 80% Power Output Suitable Solar Charge Controllers PWM Solar Controller 10A - 12/24V Dual Battery Controller 10A - 12/24V MPPT Solar Controller 10A - 12/24V (10% - 30% more power generation) Dual MPPT Solar Controller 10A - 12/24V (10% - 30% more power generation) For the best performance, we would recommend 4mm single core cable is used the same as the existing cable already attached to the solar panel junction box. The most efficient method of extending the existing cable is by using 4mm single-core cable fitted with a pair of compatible MC Type 4 Solar Connectors. 

Read more less

The New RV130S Solar Panel from Sunshine Solar is a slimline 130W solar panel with integrated roof mounts, seamlessly fitted for an aesthetically pleasing look and an aerodynamic performance. Best of all having the mounts already pre-fitted means you do not have to source and fit the mounts yourself, saving money and time. With a Sunshine 110W solar panel, you could expect to generate around 31 amps per day when used in conjunction with a PWM solar charge controller and around 37 amps per day with an MPPT solar controller during the summer months. Multiple panels can be connected to acquire higher power if needed.  With an RV130S solar panel, you could expect to generate around 36 amps per day when used in conjunction with a PWM solar charge controller and around 43 amps per day with an MPPT solar controller during the summer months. Multiple panels can be connected to acquire higher power if needed.  Specifications Product Code. RV130S Max Power. 130W ± 3% Max Power Voltage. 18V Max Power Current. 7.2A Open Circuit Voltage. 21.6V Short Circuit Current. 7.8A Normal Operating Cell Temp. -45 to 80°C Max System Voltage. DC1000V Weight. 11 Kg Dimensions. 1513 x 528 x 64mm Features Integrated Streamline Aluminium Roof Mounts 900mm of 4mm single-core insulated cable, fitted with MC Type 4 connectors High-Performance Monocrystalline Cells Factory-fitted aluminium frame with pre-drilled mounting holes Multiple pieces can be connected to acquire higher power Suitable for charging all types of 12-volt batteries Fitted with bypass diodes to minimize the effect of shading Completely weatherproof Guaranteed Performance 5 Years Manufacturers Warranty 10 Years Warranty 90% Power Output 20 Years Warranty 80% Power Output Suitable Solar Charge Controllers PWM Solar Controller 10A - 12/24V Dual Battery Controller 10A - 12/24V MPPT Solar Controller 10A - 12/24V (10% - 30% more power generation) Dual MPPT Solar Controller 10A - 12/24V (10% - 30% more power generation) For the best performance, we would recommend 4mm single core cable is used the same as the existing cable already attached to the solar panel junction box. The most efficient method of extending the existing cable is by using 4mm single-core cable fitted with a pair of compatible MC Type 4 Solar Connectors. 

Read more less

An Inverter Charger will provide an uninterrupted power supply (UPS). When mains power is available, household appliances draw power directly from the mains power (National Grid) if mains power fails, the unit automatically switches over to an external 24 volt battery source to power connected equipment with voltage and frequency-controlled AC power.  Our inverters are a very high grade and this product is supplied with heavy duty leads fitted with terminal rings for easy connectivity to your battery. The CSC2000 power inverter also comes with a built in battery charger. Inverter/Chargers will provide your equipment with utility - supplied AC power when it is available, and during blackouts and brownouts, the unit automatically switches over to an external battery source to power connected equipment with voltage and frequency-controlled AC power.Sunshine power inverters have advantages of being compact, light weight, & low noise, once connected to a battery, you get 230v AC directly from the power inverters Output Sockets giving you a stable power supply for running your electrical appliances. FEATURES Dual AC Outlets Over-temperature protection Low battery voltage alarm Low battery voltage shutdown High battery voltage shutdown Overload protection, short circuit protection, polarity reverse connection protection Specifications 2000W pure sine wave power inverter Output waveform: pure sine wave inverter Continuous power: 2000 Watt Surge power: 4000 Watt Input voltage: 20 - 30V DC Output volt: 230 Frequency: 50Hz Efficiency: >87% Charging Current: 7A Dimension (L*W*H): 39.5*23*10.8cm Weight: 5.6 KG

Read more less