Recommended products (Seguno)

The whale standard submersible pump is a simple, compact and economical solution. It has a long life and is very quiet with a low power consumption. An inexpensive way to update a manual to an electric system, it can be used with pressure and micro switch systems. • Flow rate of 10 lpm • Draw 2.4 amps • 12V Flow Rate 1 Metre Head 8.75 LPM (2.3 US GPM) Flow Rate 3 Metre Head 5.75 LPM (1.5 US GPM) Brand Whale Type Fresh Water Pumps Voltage Description 12V DC Model GP1002 Height Description Overall: 108mm (4-1/4"), Pump: 88mm (3-7/16"), Hose Connector: 20mm (13/16") Length 1m Cable Material Material In Contact with Liquid: ABS Pump Body, Nitrile Seals, Polypropylene Strainer, PBT Impeller, PVC Cable Fuse 5A Flow Rate Description 10.3 LPM Approvals ECD 2004/108/EC, CE mark, EN60335-1:2002, EN60335-2-41:2003, EN55014-1:2006 & A1:2009, EN55014-1:2006, EN55022:2006 & A1:2007 Diameter Description 36mm (1-7/16") Amps Description 2.4A Warranty 1 Year   Downloads Data Sheet

Read more less

An efficient 12V DC, high-flow, self-priming pump with good performance in an economical footprint. The Jabsco Xylem Par-Max 3 has a dry self-priming capability of 2.13 meters (7ft) and can run dry without damage. It is designed to serve two or more outlets. Pump features include a plastic housing protecting the motors from corrosion, vibration-dampening feet for quiet operation and an integrated, sealed pressure switch for on-demand operation. It has a The pressure-controlled pump is supplied with two 1/2” quick connect straight hosebarb fittings and a quick connect inline 40 mesh strainer. • Voltage: 12V DC • Open flow GPM (LPM): 3 (11) • Shut-off pressure PSI (BAR): 40 (2.8) • Max. current AMPS: 6.2 • Recommended fuse size: 10 • Port fittings: 2 x 1/2" Straight Hosebarb • Dimensions: 9.1” in length, 4.2” in width, 4.2” in height / 231(L) x 107(W) x 107(H)mm Replaces JAB-31395-0392 Self Primes up to Up to 10ft (3m) dry prime Inlet Outlet Fittings for 13mm (1/2") ID hose Brand Jabsco Type Fresh Water Pumps Voltage Description 12V DC Model 31395-4012-3A Size Leads: 12" (305mm), 16 AWG (1.5mm^2) Height Description 108mm Width 108mm Depth 231mm Weight 1.8kg Fuse 10A (not included) Temperature Range Ambient & Fluid: 0°C to 60°C (32°F ‐ 140°F) Flow Rate Description 11 LPM (2.9 US GPM) Approvals ISO 8846 Ignition Protected, C.E Certified, RCM compliant Pressure Rating Operating: 40 PSI (2.8 bar) maximum, Inlet: 30 PSI (2.1 bar) maximum Amps Description 6 Amps at 40 PSI (2.8 BAR) Supplied With Inline Strainer (40 mesh) & Quick Connect Fittings Cut In Pressure 35 PSI Cut Out Pressure Description 40 PSI / 2.8 Bar Downloads Jabsco Par Max Series Brochure en Technical Data Sheet Jabsco Xylem Par Max 3 31395 4012 3A

Read more less

The Whale Universal water pressure pump provides smooth and constant water flow thanks to its seamless 4 diaphragm design, and can operate continuously without any damage from dry running. This water pump has rotating feet to easily fit existing fresh water or saltwater pump systems. It runs quietly and efficiently, combining fantastic safety and reliability with high performance. A clear lid strainer allows for easy inspection and maintenance. The pump materials are chosen for their suitability for freshwater contact. Only polypropylene, monprene, nitrile and stainless steel making contact with fluid. The rest of the pump is made up of a glass filled polypropylene pump body and an aluminium and powder-coated steel motor casing. All diaphragms, valves and feet are monprene, the seals are nitrile and fasteners are all made from stainless steel. The Whale Universal pump range is EMC compliant, CE marked and features an ISO8846 rating for particle ingress. The pump is recommended for supplying 1-2 outlets throughout the boat. These can include taps, showers and other domestic water outlets. Accumulator Recommended Yes Maximum Recommended Head Discharge Head: 30 Metres (98 Feet) Self Primes up to 3 Metres (9.8 Feet) Wire Size Minimum: 2.5mm² (13 AWG) Inlet Outlet Fittings for 15mm Whale Female Quick Connect and 13mm (1/2") BSP / ID Hose Brand Whale Type Fresh Water Pumps Voltage Description 12V DC Model UF0815 Height Description 125mm (4.9") Width 230mm (9") Length 220mm (8.7") Material Materials in Contact with Liquid: Glass-filled polypropylene, Monoprene, Nitrile, Stainless Steel Fuse 5A Flow Rate Description 8 LPM (2.2 US GPM) Approvals EMC Compliant, CE Marked, ISO 8846 MARINE (Ignition) Series Universal Supplied With Strainer Cut Out Pressure Description 45 PSI / 3 Bar Warranty 2 Years Country of Origin United Kingdom

Read more less

Fuse Kit T10Ah Combi Each (34020-00073). Brand Truma Type Fuses

Read more less

Truma VK3 8mm 3-way gas manifold valve with brass olives and nuts. Thread Connection Metric Thread Fitting Size M8 Thread Gender Male Thread Size 8mm Male Metric Brand Truma Type Gas Valves Material Brass Primary Construction Brass Country of Origin Italy

Read more less

A 450mm rupture hose designed to be used with Truma regulators. This rupture hose is suitable for use with propane bottles and offers an additional level of protection should there be a loss of gas due to a burst hose. Brand Truma Type Gas Hoses Length 450mm Country of Origin Italy

Read more less

Truma MonoControl is a compact and lightweight gas pressure regulator for two-cylinder operation. This model is the 8mm version. (52400-51) Features: Visual indication of operating cylinder status (empty/full). Lightweight. Quick to install PLEASE NOTE: Gas appliances should only be installed by a Gas Safe registered installer and in accordance with the manufacturers' instructions. Brand Truma Type Gas Regulators Flow Rate Description 1.5 kg/h Inlet Pressure 0.3 to 16 bar Outlet Pressure 30 mbar Inlet Connection M20 Outlet Connection 10mm or 8mm Fuel LPG   Downloads Truma New Range Gas Regulators 2020

Read more less

Quick and easy shade and privacy thanks to this blind system with an integrated magnetic catch (slides from left to right). The side windows are completely pre-assembled and are simply secured to the vehicle door frames. All components of the REMIfront cab blinds fit perfectly into the interior design. The blinds do not cover the ventilation openings. Designed for the side windows without an entry handle. Please Note: this blind system is not suitable for vehicles with airbags on the A-pillar and above the doors. Brand Remis Height Description 175mm Width 1070mm Depth 265mm Weight 11kg Application Mercedes Benz Country of Origin Germany  

Read more less

Quick and easy shade and privacy thanks to this blind system with an integrated magnetic catch (slides from left to right). The side windows are completely pre-assembled and are simply secured to the vehicle door frames. All components of the REMIfront cab blinds fit perfectly into the interior design. The blinds do not cover the ventilation openings. The blinds fit Fiat Ducato X250 (from 09/2011 to 2021), X290 (from 2014) and X290 (from 2019 (S7) onwards). Please Note: this blind system is not suitable for vehicles with airbags on the A-pillar and above the doors. Brand Remis Width 5.5mm Weight 5.5kg Application Fiat Country of Origin United Kingdom  

Read more less

Quick and easy shade and privacy thanks to this blind system with an integrated magnetic catch (slides from left to right). The side windows are completely pre-assembled and are simply secured to the vehicle door frames. All components of the REMIfront cab blinds fit perfectly into the interior design. The blinds do not cover the ventilation openings.  Please Note: this blind system is not suitable for vehicles with airbags on the A-pillar and above the doors. Brand Remis Width 5.5mm Weight 5.5kg Application Fiat Country of Origin United Kingdom  

Read more less

Quick and easy shade and privacy thanks to this blind system with an integrated magnetic catch (slides from left to right). The side windows are completely pre-assembled and are simply secured to the vehicle door frames. All components of the REMIfront cab blinds fit perfectly into the interior design. The blinds do not cover the ventilation openings. For Mercedes Benz Sprinter without handle (2006 - 2018) and the structurally identical: VW Crafter (built 2006-2018). Please Note: this blind system is not suitable for vehicles with airbags on the A-pillar and above the doors. Brand Remis Width 5.5mm Weight 5.5kg Application Mercedes Benz Country of Origin United Kingdom  

Read more less

Very well priced combination blind and fly-screens in Grey. With these blind the user has the ability to completely black out the vehicle or to just partially allow light in, all the time being totally protected against insects. The blind are fitted as standard by many European motorhome manufacturers. It is possible to trim the height of these blind. 1200mm x 650mm (L = 1276mm x H 650mm). This Blind does not come with end caps. Brand NRF Application Universal

Read more less