Products under £150

Our digital multitester offers 19 testing ranges and 7 functions. The Digital multitester is a really useful tool to have around when installing solar panels as damaged caused by reversed polarity is very common place during setup, it is very easy to check polarity with the multitester eliminating the risk of damage to the solar panel and associated components. Check bulbs, fuses and batteries with ease. Specifications Power Supply: 9Vdc (1 x PP3 supplied) AC voltage: 200 - 500V DC voltage: 200mV - 500V DC current: 5A Resistance: 200Ω - 2000KΩ Test Lead Length: 570mm Dimensions: 126 x70 x 29mm Weight: 128g Features Supplied with shrouded testing probes PVC shockproof jacket PP3 battery included Transistor test function Continuity audible test function Suare wave testing signal output Low battery indication Complies with EN61010 - 1:2010

Read more less

This set of two battery terminals (Positive & Negative) are compatible with Deep Cycling Leisure Batteries. Bolt on battery terminals will give you better connection between your solar panel and the battery enhancing the charging performance. With a choice of 8mm or 10mm diameter posts.

Read more less

S-S type compatible in-line switch. This 200mm extension cable is fitted with S-S type connectors on both ends and a switch in the middle. Ideal for use in solar lighting kits.  Cable Specification 0.75mm max 5A

Read more less

S-S type compatible in-line switch. This 200mm extension cable is fitted with S-S type connectors on both ends and a switch in the middle. Ideal for use in solar lighting kits.  Cable Specification 0.75mm max 5A

Read more less

Here you can purchase custom size 40mm² Flexible DC cable with pre-attached lugs, ideal for linking multiple batteries together.  Our Flexible DC cable is available in six different cable dimensions (mm²) and cable lengths varying from 200mm to 1200mm with a choice of pre-attached lugs. This product is cut and crimped in house so if you have a specific requirement, just ask and we would be more than happy to give you a quote. Heavy Duty 40mm² Flexible Battery Joining Cables custom made with a choice of 8mm or 10mm lugs.

Read more less

The marine solar charge controller is a waterproof PWM charge controller that adopts the most advanced digital technology. The multiple load control modes enable it to be widely used on home solar systems, field monitoring, traffic signals, solar street lighting and due to the IP67 waterproof rating ideal for marine solar systems.  Electronic Protections Short circuit & over current - solar & load Reverse polarity - solar, load & battery Reverse current at night High voltage - load Lightning - solar, load & battery Features Maximum Solar Input Power: 120 Watts @ 12V - 240 Watts @ 24 Volts Supports 3 charging options: Sealed, Gel and Flooded Multiple load control modes Battery temperature compensation function Microcontroller digital accuracy PWM charge mode & state of charge (SOC) Fully automatic operation & electronic protections Waterproof rating IP67 The controller comes with cables attached providing a waterproof seal to the unit, when extending these cables we recommend heat shrink sleeving is used to create a waterproof seal around the join.Dimensions: 108.5mm x 64mm x 25.6mm Intended use: For use with solar panels up to a maximum of 10A

Read more less

Remote meter with 1.5m of cable for use with: Dual Battery MPPT Solar Charge Controller 10A 12V/24V Dual Battery MPPT Solar Charge Controller 30A 12V/24V LCD features Time Battery 1 - Voltage Max and Min Battery 2 - Voltage Max and Min PV - Voltage and AH Remote Temperature Please Note: Only Compatible with the following products: EDR10A & EDR20A

Read more less

This Sunshine Solar Controller features the latest PWM charge regulation for reliable and economical battery charge control.  Specifications Rated Charging Current: 20 amps Rated Load current Ie: 20 amps Maximum Solar Input Power: 240 Watts @ 12V - 480 Watts @ 24 Volts Over load, short circuit Protection: 1.25 times of Ie for 60secs 1.5 times of Ie for 5secs Overload protection: ≥ 3 times of Ie short circuit protection Self-consumption: ≤ 6mA System voltage: 12/24V Auto-set Work temperature: Industrial (l series):-35° to +55° Charging Circuit Voltage Drop: ≤ 0.26mA Discharging circuit voltage drop: ≤ 0.15mA Regulation point: 14.4 V 12 volt working; 28.80 24 volt working Low voltage disconnect: 11.1 V 12 volt working; 22.20 24 volt working Low voltage reconnect: 13.1 V 12 volt working; 26.10 24 volt working Temperature compensation: 0-10mV/°C/2V Control mode: PWM charging Dimensions: 153mm x 76mm x 37mm Features Microcontroller digital accuracy Type of Charging Series PWM & state of charge(SOC) 4 Stages: equalization, PWM, Boost and Float, temperature compensated charging Electronic protections Short circuit and over current-solar and load Reverse polarity-solar, load and battery Reverse current at night Limits high voltage to protect loads Lighting protection Tropicalization Conformal coated printed circuit board Terminals For wire sizes to 6mm² Optional Remote meter and temperature sensor can be purchased for this product (see related items).

Read more less

This Sunshine Solar Controller features the latest PWM charge regulation for reliable and economical battery charge control.    Features Maximum Solar Input Power: 120 Watts @ 12V - 240 Watts @ 24 Volts Self Consumption: <8.4mA Four Stages: Equalization, PWM, Boost and Float Battery Selection: Gel, Sealed, Flooded and user defined with Remote Meter Microcontroller digital accuracy PWM charge mode & state of charge (SOC) Fully automatic operation & electronic protections Temperature compensation, external temperature sensor Large terminals for up to 4mm² size wire Electronic Protections Short circuit & over current - solar & load Reverse polarity - solar, load & battery Reverse current at night High voltage - load Lightning - solar, load & battery Humidity Protections Circuit board-conformal coated Terminals - corrosion protected Dimensions: 140mm x 70mm x 38mm Intended use: For use with solar panels up to a maximum of 10A

Read more less

Our latest Dual-battery charging solar controller eliminates the added cost of two separate solar charging systems. The controller uses Pulse Width Modulation (PWM) the most effective means to achieve constant voltage battery charging, the result is a higher charging efficiency, rapid recharging and healthy batteries at full capacity. This controller is ideal for use with motorhomes, caravans, boats or anywhere there are two independent batteries for instance a starter battery and a leisure battery. The Charging percentages for each battery can be set manually if required.Features Maximum Solar Input Power: 120 Watts @ 12V - 240 Watts @ 24 Volts Battery type selection: Sealed, Flooded or Gel Two battery charging priority (from 0-100%) Battery temperature sensor Optional Remote meter (see options and related products below) PWM charging, different frequency option. Over charging, short-circuit, reverse polarity & reverse current to PV Protection Intended use:For use with solar panels up to a maximum of 10AMore technical information can be found in the Instruction Manual PDF

Read more less

Powerful 12 volt LED Floodlight includes wall mount bracket. Low energy lighting at its best, rated at IP65 these versatile flood lights can be mounted externally to provide added security around the home or business premises. Being 12V they are suited for use in remote locations where there is no mains power as they can be simple connected to any 12V battery for an effective lighting solution. Other popular applications include lighting for outbuildings such as stables, garages, sheds, barns, warehouses and more. Colour selection below available in black or grey.Specifications Housing colour: Black or Grey Power consumption: 20±2W Input voltage: 12VDC Pre wired with 900mm of insulated twin core cable LED light source: Epistar COB LED luminous efficiency: 80-90lm/W LED luminous flux: 1670lm Luminaire efficiency: >90% Illumination uniformity: >0.8 Correlated Colour Temperature: 4000-4500K（natural white） Colour rendering index: Ra≥75 Beam Angle: 120º Degree of protection: IP65 Operating ambient temperature: -40°C~50°C Storage ambient temperature: -40°C~50°C Lifespan: 40000H CE certified RoHS approved The perfect combination of power and low energy

Read more less

Powerful 12 volt LED Floodlight includes wall mount bracket. Low energy lighting at its best, rated at IP44 these versatile flood lights can be mounted externally to provide added security around the home or business premises. Being 12V they are suited for use in remote locations where there is no mains power as they can be simple connected to any 12V battery for an effective lighting solution. Other popular applications include lighting for outbuildings such as stables, garages, sheds, barns, warehouses and more. The LED 20W PIR floodlight is the equivalent of traditional HQI/SON floodlights. Made of heavy duty cast aluminium and having an IP44 rating makes them weatherproof and suitable for any installation. They are outstandingly bright, created by single LED chip technology with a lumen output of up to 1670lm and an impressive 40,000 hours of lamp life. They come with a stirrup bracket for easy fitting.PIR sensor Details The PIR sensor has a 120º motion sensor with a built in adjustable brightness detector that can be adjusted based on the brightness you want the floodlight to operate on the PIR sensor. There is also the option to adjust the delay timer of when the floodlight will turn off between 5 seconds and 10 minutes. The PIR detection range is 0~8m ；＜22º,8-12m20W LED floodlights stay cooler Unlike traditional lighting the LED PIR floodlight converts up to 80% of its power consumption into light rather than heat. This makes the LED floodlight much cooler to the touch during and after use than traditional floodlighting.Longer lasting All LED lights last much longer than a traditional lighting solution, or in fact longer than energy efficient lighting. You won't need to replace your lighting as often. Specifications Housing colour: Black Rated power: 20W Power consumption: 20±2W Input voltage: 12V DC Pre wired with 900mm of insulated twin core cable LED Quantity: 1 LED light source: Epistar COB LED luminous efficiency: 80-90lm/W LED luminous flux: 1670lm Luminaire efficiency: >90% Illumination uniformity: >0.8 Color Temperature: Natural White 4000K- 4500K Beam Angle: 120º Degree of protection: IP44 Operating ambient temperature: -40℃ - 50℃ Lifespan: 40000 hrs CE certified RoHS approved

Read more less