The AVON brand is synonymous with Quality, Durability, High Performance and Value. By sourcing AVON products from the world’s leading factories, and manufacturing them to our exact specifications, we can ensure a Reliable Stockholding, a Premium Quality Alternative and Exceptional Value.
CATEGORIES:
Electric Vehicles
Forklift
Leisure
Marine
Mobility /Stairlift
Solar Panel Equipment
DIMENSIONS: 151 X 99 X 103mm
YBX1000 CaCa Batteries
Capacity Ah (20-HR): 45Capacity at 20-hour Rate (Ah): 45Cold Cranking Performance (Amps) EN1: 380
Up to 20,000 engine starts
For vehicles with basic power demands
Yuasa YBX® conventional automotive batteries are:
Original equipment (OE) quality, performance & specification
Fully maintenance free
Supplied charged & ready to fit
Designed with enhanced safety features including integrated flame arrestor & carrying handles
Due to unprecedented demand following the easing of COVID-19 lockdown measures, this product may be supplied without a state of charge indicator and not conform to the level of roll over protection advertised. Product performance and quality are not affected by this. Please check battery labels for specification details.
Case Type
L1
Voltage
12V
Capacity at 20-hour Rate (Ah)
45
Cold Cranking Performance (Amps) EN1
380
Mean Weight with Acid (kg)
11.8
Cell Layout
0
Terminal
T1
Recommended Charge Rate (Amps)
3
Handles
Yes
End-Venting
Yes
Capacity Ah (20-HR)
45
Terminal Type
T1
Length (mm)
207
Width (mm)
175
Height (mm)
190
NCC Class
N/A
Small portable Fire Extinguisher-Non-Pressurised Easy To Use | No Residue | Multipurpose for Vehicle, Office, Kitchen etc. | Environmentally Safe |
Firetool works with all types of fire including liquid fires, gas fires and electrical fires and is maintenance free for 5 years
Features
Revolutionary Design
Maintenance free for 5 Years
Environmentally Friendly
Toxic Free
Easy to use
Tested and Certified
Specifications
Length - 242 mm
Diameter - 53 mm
Discharge Distance - 3m/10ft
Discharge Time - 12 secs+
Weight - 500g
Operating Temperature -20 C to 60 C
The Stinger 300 is best suited to aftermarket applications or as a replacement for our older AS210 system.
It uses a simple to fit 2 wire power connection and is supplied with a mating cable for use if your caravan doesn-t have an appropriate socket.
Download User instruction for more details **
Available separately - Replacement 4.8V battery for Sargent Stinger 300 and 310 Alarm systems. This is a 9Ah NiMH rechargeable battery, comes complete with adhesive tape strip.
Long Range 10m - Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers. With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life
The Victron Energy Smart Battery Protect 12/24V 65A protects the battery against excessive discharge and can be used as a system on/off switch The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. The on/off input can be used as a system on/off switch.
BatteryProtect BP-65 Specifications
Max. continuous load current* 65A
Peak current (during 30 seconds) 250A
Operating voltage range 6 –35V
Current consumption When on: 1,4 mA When off or low voltage shutdown: 0,9 mA
Alarm output delay 12 seconds
Maximum load on alarm output 50 mA (short circuit proof)
Load disconnect delay 90 seconds (immediate if triggered by the VE.Bus BMS)
Load reconnect delay 30 seconds
Default thresholds Disengage: 10,5V or 21V Engage: 12V or 24V
Operating temperature range Full load: -40°C to +40°C (up to 60% of nominal load at 50°C)
IP rating Electronics: IP67 (potted)
Connections: IP00 Connection: M8
Weight: 0,2 kg
Dimensions (hxwxd) 40 x 48 x 106 mm
Features
12/24V auto ranging -
The Smart BatteryProtect automatically detects system voltage one time only.
Bluetooth: programming made easy -
When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set. Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual). If required, Bluetooth can be disabled.
A special setting for Li-ion batteries -
In this mode the BatteryProtect can be controlled by the VE.Bus BMS. Note: the BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual.
Ultra-low current consumption -
This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.
Over voltage protection -
To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16.3V respectively 32.6V.
Ignition proof -
No relays but MOSFET switches, and therefore no sparks.
Delayed alarm output -
The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.
Delayed load disconnect and delayed reconnect -
The load will be disconnected 90 seconds after the battery voltage drops below the preset level. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.
Please download the link for more info>>Pdf
The Battery Balancer equalizes the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries.When the charge voltage of a 24V battery system increases to more than 27V, the Battery Balancer will turn on and compare the voltage over the two series connected batteries. The Battery Balancer will draw a current of up to 1A from the battery (or parallel connected batteries) with the highest voltage. The resulting charge current differential will ensure that all batteries will converge to the same state of charge. If needed, several balancers can be paralleled. A 48V battery bank can be balanced with three Battery Balancers.
Features
LED indicators
Green: on (battery voltage > 27,3V) Orange: lower battery leg active (deviation > 0,1V) Orange: upper battery leg active (deviation > 0,1V) Red: alarm (deviation > 0,2V). Remains on until the deviation has reduced to less than 0,14V, or until system voltage drops to less than 26,6V.
Alarm relay
Normally open. The alarm relay closes when the red LED switches on and opens when the red LED switches off
Alarm reset
Two terminals are available to connect a push button. Interconnecting the two terminals resets the relay. The reset condition will remain active until the alarm is over. Thereafter the relay will close again when a new alarm occurs
Even more insight and control with the midpoint monitoring function of the BMV-702 Battery Monitor
The BMV-702 measures the midpoint of a string of cells or batteries. It displays the deviation from the ideal midpoint in volts or percent. Separate deviation percentages can be set to trigger a visual/audible alarm and to close a potential free relay contact for remote alarm purposes.
The carry case for the IP65 charger is one of those indispensable accessories. It protects your charger from the knocks and bangs of workshop life. It allows tidy storage, too – cables never get tangled …or lost; everything is in one place; and if you use an IP65 charger in your work – it gives a professional appearance. Compartments accommodate the charger, its input/output cables; plus the battery-clamp/eyelet cable options. (Charger and accessories not included)
Dimensions
Height (mm) 295
Width (mm) - 350
Depth (mm) - 105
The Victron Energy Automotive IP65 Battery Charger 6V/12V-1,1A will automatically adapt its charge algorithm to 6V or 12V batteries making it a very versatile trickle charger for small capacity batteries.
DC connector
Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the charger.
Charges 6V and 12V batteries
The charger will automatically adapt its charge algorithm to 6V or 12V batteries Protected against overheating and reverse polarity connection The output current will reduce as temperature increases up to 40°C, but the charger will not fail. Output relay protects against reverse polarity connection.
Protected against overheating and reverse polarity connection
The output current will reduce as temperature increases up to 40°C, but the charger will not fail. Output relay protects against reverse polarity connection.
Eight LED’s for status and mode indication
When connected to the AC supply the STAND-BY LED will turn on. No voltage will be present at the output. After connection to a battery (battery voltage must exceed 2V in case of a 6V battery and 7V in case of a 12V battery), charging is initiated by pressing the MODE button. The state of charge of the battery is indicated by 4 LED’s:
1. Red LED marked 25% flashing: state of charge less than 25%.
2. Red LED marked 25% on, and red LED marked 50% flashing: state of charge less than 50%.
3. Red LED’s on, and yellow LED marked 75% flashing: state of charge less than 75%.
4. Red and yellow LED’s on and green LED marked 100% flashing: battery nearly charged.
5. All charge level LED’s solid on: battery fully charged. Flooded, AGM or GEL batteries. Ambient temperature below 10°C, or batteries requiring a higher charge voltage (OPTIMA spiral cell batteries for example).
In case of reverse polarity connection, the orange LED ! will turn on after pressing the MODE button. If the red LED STANDBY remains on, even after pressing the MODE button, the connection to the battery is interrupted. The charger always starts in STANDBY mode when connected to the AC supply.
Bostik Simson STR 360 Structural adhesive, enables you to fix your solar panel to a variety of surfaces including caravans and motorhomes without the need to drill any holes! STR 360 is a Silyl Modified Polymer (SMP) based adhesive with a high tensile strength and is suitable for making elastic constructive joints.
Applications
Elastic bondings and sealings in e.g. bus-, caravan- and trailer construction.
Bonding of metals, glass and plastics.
Features
Colour: White
Cartridge Size: 290ml
Silyl Modified Polymer
Solvent-, isocyanate- and PVC-free.
Good UV-resistance and ageing properties.
Permanently elastic in a temperature range of –40°C to +90°C
In general, STR 360 adheres well without primer on clean, dry, dust- and grease-free substrates of aluminium, stainless steel, galvanised steel, zinc, copper, brass, powder-coated metal, most lacquered metal surfaces, glass, PVC, polyester (GRP), painted and lacquered wood, etc. No adhesion on untreated polyethene, polypropylene and Teflon. In case of high adhesion demands the use of Simson Prep M is recommended. Prep M degreases and prepares the surface of the substrate in one step. On plain, untreated wooden surfaces and other porous substrates, Simson Prep P is recommended. In case the joint is exposed to UV radiation the bond surface has to be protected by UV-blocking methods like Simson Prep G. For more details concerning Prep M, Prep P and Prep G consult the specific technical information data sheets. For not mentioned substrates and additional information consult Bostik.
For more info please download the link below
Datasheet1
