The Jabsco Par Max 2 water pressure controlled pump is designed for vessels requiring a smooth low flow pump at an attractive low price.
Jabsco Par Max 2 water pressure pumps are internally grounded and have a three chamber diaphragm on demand pump with the performance characteristics to match the needs of a typical vessel with a shower, water heating and up to three faucets.
The water pressure pump is fitted with a built-in pulsation dampening by-pass to control unwanted cycling and noise. Quick connection fittings are included as standard for ease of pump installation, as well as a 40 mesh inline strainer.
Jabsco Par Max Pressure Pump Features & Benefits:
- Enclosed motor
- Integrated Pressure Switch
- Vibration & Noise reducing mounting
- Self‐priming
- Runs Dry without Damage
Replaces
Jabsco 31295‐0094 Par Max 1.9 Pumps & 42630‐2994‐P. Closest Alternative for 509409 Flojet R4305 Pressure Pump & 42630‐3994‐P.
Self Primes up to
3 Metres (9.8 Feet) Vertical Lift
Inlet Outlet
Fittings for 13mm (1/2") ID hose
Brand
Jabsco
Type
Fresh Water Pumps
Voltage Description
24V DC
Model
31295-3524-3A
Size
Leads: 305mm (12"), 1.5mm2 (16 AWG)
Height Description
107mm (4.2")
Width
107mm (4.2")
Length
231mm (9.1")
Fuse
5A (not included)
Temperature Range
Ambient & Fluid: 0°C to 60°C (32°F ‐ 140°F)
Flow Rate Description
7.6 LPM (2 US GPM)
Approvals
ISO 8846 MARINE (ignition protection), CSA Listed, C.E Certified
Pressure Rating
Operating: 25 PSI (1.7 bar) maximum, Inlet: 30 PSI (2.1 bar) maximum
Series
Par Max 2
Amps Description
3A (at 35 PSI / 1.7 bar)
Supplied With
Inline Strainer (40 Mesh) & Quick Connect Fittings
Cut In Pressure
15 PSI / 1 Bar
Cut Out Pressure Description
35 PSI / 2.4 Bar
Warranty
3 Years
Downloads
parmax 2 datasheet 31295 3524 3a
An efficient 12V DC, high-flow, self-priming pump with good performance in an economical footprint. The Jabsco Xylem Par-Max 3 has a dry self-priming capability of 2.13 meters (7ft) and can run dry without damage. It is designed to serve two or more outlets.
Pump features include a plastic housing protecting the motors from corrosion, vibration-dampening feet for quiet operation and an integrated, sealed pressure switch for on-demand operation. It has a
The pressure-controlled pump is supplied with two 1/2” quick connect straight hosebarb fittings and a quick connect inline 40 mesh strainer.
• Voltage: 12V DC
• Open flow GPM (LPM): 3 (11)
• Shut-off pressure PSI (BAR): 40 (2.8)
• Max. current AMPS: 6.2
• Recommended fuse size: 10
• Port fittings: 2 x 1/2" Straight Hosebarb
• Dimensions: 9.1” in length, 4.2” in width, 4.2” in height / 231(L) x 107(W) x 107(H)mm
Replaces
JAB-31395-0392
Self Primes up to
Up to 10ft (3m) dry prime
Inlet Outlet
Fittings for 13mm (1/2") ID hose
Brand
Jabsco
Type
Fresh Water Pumps
Voltage Description
12V DC
Model
31395-4012-3A
Size
Leads: 12" (305mm), 16 AWG (1.5mm^2)
Height Description
108mm
Width
108mm
Depth
231mm
Weight
1.8kg
Fuse
10A (not included)
Temperature Range
Ambient & Fluid: 0°C to 60°C (32°F ‐ 140°F)
Flow Rate Description
11 LPM (2.9 US GPM)
Approvals
ISO 8846 Ignition Protected, C.E Certified, RCM compliant
Pressure Rating
Operating: 40 PSI (2.8 bar) maximum, Inlet: 30 PSI (2.1 bar) maximum
Amps Description
6 Amps at 40 PSI (2.8 BAR)
Supplied With
Inline Strainer (40 mesh) & Quick Connect Fittings
Cut In Pressure
35 PSI
Cut Out Pressure Description
40 PSI / 2.8 Bar
Downloads
Jabsco Par Max Series Brochure en
Technical Data Sheet Jabsco Xylem Par Max 3 31395 4012 3A
An efficient 24V DC, high-flow, self-priming pump with good performance in an economical footprint. The Jabsco Xylem Par-Max 3 has a dry self-priming capability of 2.13 meters (7ft) and can run dry without damage. It is designed to serve two or more outlets.
Pump features include a plastic housing protecting the motors from corrosion, vibration-dampening feet for quiet operation and an integrated, sealed pressure switch for on-demand operation.
The pressure-controlled pump is supplied with two 1/2" quick connect straight hose barb fittings and a quick connect inline 40 mesh strainer.
• Voltage: 24V DC
• Open flow: 3 GPM (11 LPM)
• Shut-off pressure: 40 PSI (2.8 BAR)
• Max. current: 3.1 Amps
• Recommended fuse size: 5A
• Port fittings: 2x 1/2" Straight Hose barb
• Dimensions: 9.1" (231mm) in length, 4.2" (107mm) in width, 4.2" (107mm) in height
Replaces
JAB-31395-0394
Self Primes up to
Up to 10ft (3m) dry prime
Inlet Outlet
Fittings for 13mm (1/2") ID hose
Brand
Jabsco
Type
Fresh Water Pumps
Voltage Description
24V DC
Model
31395-4024-3A
Size
Leads: 12" (305mm), 16 AWG (1.5mm^2)
Height Description
108mm
Width
108mm
Depth
231mm
Weight
1.8kg
Fuse
5A (not included)
Temperature Range
Ambient & Fluid: 0°C to 60°C (32°F ‐ 140°F)
Flow Rate Description
11 LPM (2.9 US GPM)
Approvals
ISO 8846 Ignition Protected, C.E Certified, RCM compliant
Pressure Rating
Operating: 40 PSI (2.8 bar) maximum, Inlet: 30 PSI (2.1 bar) maximum
Amps Description
3 Amps at 40 PSI (2.8 BAR)
Supplied With
Inline Strainer (40 mesh) & Quick Connect Fittings
Cut In Pressure
15 PSI
Cut Out Pressure Description
40 PSI / 2.8 Bar
Downloads
Jabsco Par Max Series Brochure en
Technical Data Sheet Jabsco Xylem Par Max 3 31395 4024 3A
The Jabsco Xylem Par-Max HD4 12V DC freshwater delivery pump features a wide diameter motor (compared to non-HD models) with a powder-coated shell, cast aluminium endbells and lower housing to improve pressure capability and life.
The pump delivers exceptional performance and has a dry self-priming capability of 2.13 meters (7ft) and can run dry without damage. It is designed to serve four or more outlets.
Pump features include vibration-dampening feet for quiet operation and an integrated, sealed pressure switch for on-demand operation. The pump is supplied with two 1/2” quick connect straight hosebarb fittings and a quick connect inline 40 mesh strainer.
• Voltage: 12V DC
• Open flow GPM (LPM): 4 (15)
• Shut-off pressure PSI (BAR): 40 (2.8)
• Max. current AMPS: 10.0
• Recommended fuse size: 15
• Port fittings: 2 x 1/2" Straight Hosebarb
• Dimensions: 9.4” in length, 4.1” in width, 3.8” in height / 239(L) x 104(W) x 97(H)mm
Replaces
509737
Self Primes up to
Up to 8ft (2.4m) dry prime
Inlet Outlet
Fittings for 13mm (1/2") ID hose
Brand
Jabsco
Type
Fresh Water Pumps
Voltage Description
12V DC
Model
Q401J-115S-3A
Size
Leads: 12" (305mm), 14 AWG (2.5mm^2)
Height Description
97mm
Width
104mm
Depth
239mm
Weight
2.94kg
Fuse
15A (not included)
Temperature Range
Ambient & Fluid: 0°C to 60°C (32°F ‐ 140°F)
Flow Rate Description
15 LPM (4 US GPM)
Approvals
ISO 8846 Ignition Protected, C.E Certified, RCM compliant
Pressure Rating
Operating: 40 PSI (2.8 bar) maximum, Inlet: 30 PSI (2.1 bar) maximum
Amps Description
10 Amps at 40 PSI (2.8 BAR)
Supplied With
Inline Strainer (40 mesh) & Quick Connect Fittings
Cut In Pressure
35 PSI
Cut Out Pressure Description
40 PSI / 2.8 Bar
Downloads
Jabsco Par Max Series Brochure en
Technical Data Sheet Jabsco Xylem Par Max HD4 Q401J 115S 3A
Top-of-the-line boot bike rack with raised platform dedicated for the Volkswagen T6.
Quick and simple to mount thanks to fully pre-assembled and dedicated fit to the Volkswagen T6
Possible to increase load capacity up to 4 bikes by adding a third bike and a fourth bike adaptor (adaptors sold separately)
The raised position of the rack keeps the rear lights and license plate visible
Easy mounting of bikes through detachable bike arms with lockable Thule AcuTight torque limiter knobs that click when optimal torque is reached
Simple loading of bikes thanks to easy-to-adjust rails that slide from left to right
Simple to fasten wheels, thanks to the adjustable wheel holders with pump buckles
Platform folds up vertically against the boot when not in use
Locks the bikes to the bike rack (lock included)
Possible to open vehicle trunk without any mounted bikes
We provide locks system that reduce the risk of theft but will not constitute a total guarantee against risk of bikes being stolen. For added bike safety we recommend to use Thule Cable lock, Thule Wheel Strap Locks (see accessories section) or any premium high-grade cable lock
Technical specifications
Max number of bikes
2 (3) (4)
Load capacity
60 KG
Max bike weight
30 KG
Dimensions
152 x 111 x 91 cm
Folded dimensions
152 x 47 x 91 cm
Weight
12.4 kg
Fits frame dimensions
22-80 mm
Distance between bikes
31 cm
Max tire width
2.75 in
Max wheel size (diameter)
29 in
Max wheelbase
127 cm
Detachable frame holders
One Key System compatible
Lockable bike-to-rack
Lockable rack-to-vehicle
Transform Your Adventures with the Thule Omnistor 6300
Imagine this: You've found the perfect spot. The sun is setting over rolling hills, and you're sitting comfortably in the shade of your awning, a cup of tea in hand, watching the world go by. No rush. No stress. Just you, your loved ones, and the open road.
That's the freedom the Thule Omnistor 6300 delivers.
The Premium Choice for Motorhome and Van Owners
The Thule Omnistor 6300 is the flagship roof-mounted awning from Thule, designed specifically for motorhomes, caravans, and mid-class vans. Whether you're a weekend explorer or a full-time traveller, this awning transforms any parking spot into your outdoor living room.
Key Features
Perfect Fabric Tension, Every Time
The patented integrated tension arms and spring-loaded mechanism ensure your awning fabric stays drum-tight, even in windy conditions. No more saggy, flapping awnings keeping you awake at night.
Thule Quick-Lock System
Set up in seconds with the intuitive Quick-Lock system. Simply release, extend, and lock the support legs to your desired height. You'll be relaxing under your awning while others are still reading instructions.
Adjustable Pitch
The Thule Adjustable Pitch system lets you angle the awning fabric as needed, so you can open your vehicle door without touching the fabric.
Optional Electric Operation
For awnings 3.00m and longer, add the optional 12V DC motor for one-touch operation. Open and close your awning at the press of a button. Integrated manual override with hand crank included for power failures.
No Roof Drilling Required
Install using adhesive roof adapters or transverse profiles. Your roof stays intact, and your caravan rail remains free for other accessories.
Anti-Rattling Design
Integrated anti-rattling solutions mean quiet, vibration-free driving.
| Size | Projection | | 2.60 x 2.50m | 2.50m | Compact vans, small motorhomes || 3.00 x 2.50m | 2.50m | Mid-size campervans || 3.25 x 2.50m | 2.50m | Popular choice for most motorhomes || 3.50 x 2.50m | 2.50m | Larger motorhomes || 3.75 x 2.50m | 2.50m | Extended coverage || 4.00 x 2.50m | 2.50m | Full-length protection || 4.25 x 2.50m | 2.50m | Large motorhomes || 4.50 x 2.50m | 2.50m | Extra large coverage || 5.00 x 2.50m | 2.50m | Maximum coverage |
Colour Options
Box Colours: Anthracite, White, Anodised
Fabric Colour: Mystic Grey
Professional Installation Available 🔧
Not confident fitting it yourself? We offer professional installation at our Bristol workshop.
Our experienced engineers will:
•Fit your awning perfectly to your vehicle
•Ensure correct positioning and alignment
•Test all mechanisms
•Demonstrate operation
•Dispose of packaging
📞 Call 01173293660 or WhatsApp 07407221667 to book your installation.
What's in the Box
•Thule Omnistor 6300 awning cassette
•Support legs (2x)
•Fixing hardware
•Installation instructions
•Thule warranty documentation
Note: Roof adapters/brackets sold separately - see our adapter range above.
Why Buy from LAEVP?
✅ Authorised Thule Dealer - Genuine products with full warranty
✅ Professional Installation - Expert fitting at our Bristol workshop
✅ Free UK Delivery - On orders over £150
✅ Expert Advice - Our team includes qualified engineers
✅ Price Match - Found it cheaper? Let us know
✅ 5,800+ Orders Fulfilled - Trusted by UK
For more info please see in the links below
Setup Instructions / Info & Size Chart / Van L2 H2 L4 Van Size Chart
Van Chart For Ducato / Peugot Boxer / Citroen Jumper
Frequently Asked Questions
Will the Thule Omnistor 6300 fit my vehicle?
The Thule Omnistor 6300 fits most motorhomes, caravans, and mid-class vans including Mercedes Sprinter, VW Crafter, Fiat Ducato, Peugeot Boxer, and Citroën Relay. You'll need vehicle-specific adapters which are sold separately. Contact us on 01173293660 or WhatsApp 07407221667 with your vehicle details and we'll confirm compatibility and recommend the correct adapter kit.
Do I need to drill through my roof to install the awning?
No! The Thule Omnistor 6300 can be installed using adhesive roof adapters or transverse profiles, so your roof stays completely intact. This also means your caravan rail remains free for other accessories. We offer professional installation at our Bristol workshop if you'd prefer expert fitting.
What size awning do I need for my motorhome?
Measure the length of your vehicle where you want the awning mounted. The Thule 6300 comes in 9 sizes from 2.60m to 5.00m. Most popular choices:
2.60m - 3.00m: Compact vans and small campervans
3.25m - 3.75m: Most motorhomes (best sellers)
4.00m - 5.00m: Large motorhomes and A-class vehicles
Not sure? Call us and we'll help you choose the right size.
Can I add the electric motor later?
Yes! The Thule Motor Kit can be retrofitted to any Omnistor 6300 awning that is 3.00m or longer. The 12V DC motor allows one-touch operation via a switch, and includes an integrated manual override with hand crank in case of power failure. We stock the motor kit in Anodised, Anthracite, and White to match your awning.
Do you offer professional installation?
Yes! We offer professional awning installation at our Bristol workshop. Our experienced engineers will fit your Thule Omnistor 6300 perfectly, ensure correct positioning and alignment, test all mechanisms, and demonstrate operation. Call 01173293660 or WhatsApp 07407221667 to book your installation appointment.
The Jabsco Xylem Par-Max HD4 24V DC freshwater delivery pump features a wide diameter motor (compared to non-HD models) with a powder-coated shell, cast aluminium endbells and lower housing to improve pressure capability and life.
The pump delivers exceptional performance and has a dry self-priming capability of 2.13 meters (7ft) and can run dry without damage. It is designed to serve four or more outlets.
Pump features include vibration-dampening feet for quiet operation and an integrated, sealed pressure switch for on-demand operation. The pump is supplied with two 1/2” quick connect straight hosebarb fittings and a quick connect inline 40 mesh strainer.
Voltage: 24V DC
Open flow GPM (LPM): 4 (15)
Shut-off pressure PSI (BAR): 25 (1.7) EU only
Max. current AMPS: 4.0
Recommended fuse size: 10
Port fittings: 2 x 1/2" Straight Hosebarb
Dimensions: 9.4” in length, 4.1” in width, 3.8” in height / 239(L) x 104(W) x 97(H)mm
Replaces
509738
Self Primes up to
Up to 8ft (2.4m) dry prime
Inlet Outlet
Fittings for 13mm (1/2") ID hose
Brand
Jabsco
Type
Fresh Water Pumps
Voltage Description
24V DC
Model
Q402J-112S-3A
Size
Leads: 12" (305mm), 14 AWG (2.5mm^2)
Height Description
97mm
Width
104mm
Depth
239mm
Weight
2.92kg
Fuse
10A (not included)
Temperature Range
Ambient & Fluid: 0°C to 60°C (32°F ‐ 140°F)
Flow Rate Description
15 LPM (4 US GPM)
Approvals
ISO 8846 Ignition Protected, C.E Certified, RCM compliant
Pressure Rating
Operating: 25 PSI (1.7 bar) maximum, Inlet: 30 PSI (2.1 bar) maximum
Amps Description
4 Amps at 25 PSI (1.7 BAR)
Supplied With
Inline Strainer (40 mesh) & Quick Connect Fittings
Cut In Pressure
10 PSI
Cut Out Pressure Description
25 PSI / 1.7 Bar
Downloads
Jabsco Par Max Series Brochure en
Technical Data Sheet Jabsco Xylem Par Max HD4 Q402J 112S 3A
The Jabsco Xylem Par-Max HD4 24V DC freshwater delivery pump features a wide diameter motor (compared to non-HD models) with a powder-coated shell, cast aluminium endbells and lower housing to improve pressure capability and life.
The pump delivers exceptional performance and has a dry self-priming capability of 2.13 meters (7ft) and can run dry without damage. It is designed to serve four or more outlets.
Pump features include vibration-dampening feet for quiet operation and an integrated, sealed pressure switch for on-demand operation. The pump is supplied with two 1/2” quick connect straight hosebarb fittings and a quick connect inline 40 mesh strainer.
• Voltage: 24V DC
• Open flow GPM (LPM): 4 (15)
• Shut-off pressure PSI (BAR): 40 (2.8)
• Max. current AMPS: 5.0
• Recommended fuse size: 10
• Port fittings: 2 x 1/2" Straight Hosebarb
• Dimensions: 9.4” in length, 4.1” in width, 3.8” in height / 239(L) x 104(W) x 97(H)mm
Replaces
509739
Self Primes up to
Up to 8ft (2.4m) dry prime
Inlet Outlet
Fittings for 13mm (1/2") ID hose
Brand
Jabsco
Type
Fresh Water Pumps
Voltage Description
24V DC
Model
Q402J-115S-3A
Size
Leads: 12" (305mm), 14 AWG (2.5mm^2)
Height Description
97mm
Width
104mm
Depth
239mm
Weight
2.88kg
Fuse
10A (not included)
Temperature Range
Ambient & Fluid: 0°C to 60°C (32°F ‐ 140°F)
Flow Rate Description
15 LPM (4 US GPM)
Approvals
ISO 8846 Ignition Protected, C.E Certified, RCM compliant
Pressure Rating
Operating: 40 PSI (2.8 bar) maximum, Inlet: 30 PSI (2.1 bar) maximum
Amps Description
5 Amps at 40 PSI (2.8 BAR)
Supplied With
Inline Strainer (40 mesh) & Quick Connect Fittings
Cut In Pressure
15 PSI
Cut Out Pressure Description
40 PSI / 2.8 Bar
Downloads
Jabsco Par Max Series Brochure en
Technical Data Sheet Jabsco Xylem Par Max HD4 Q402J 115S 3A
Fresh water diaphragm pump from Shurflo, with redesigned 4 chamber head, fully adjustable sealed pressure switch and heavy duty sealed motor. Built in check-valve, self primes (up to 6 feet), will run dry without damage. Ignition and thermal protection. Heavy duty design provides smoother flow due to 4 chamber head.
• 7.6lpm, 20psi
Maximum Recommended Head
1.8 Metres
Replaces
509502 - SHURflo Aqua King Junior 12v Fresh Water Pressure Pump
Self Primes up to
1.82 Metres (6 Feet)
Inlet Outlet
1/2"-14 NPSM Male (13mm)
Brand
SHURflo
Type
Fresh Water Pumps
Voltage Description
12V DC
Model
4129-110
Height Description
104mm (4.1")
Width
124mm (4.9")
Length
208mm (8.2")
Material
Polypro Housings, EPDM Valves / Seals, Santoprene Draphragm, Stainless Steel Hardware
Fuse
5A Recommended
Flow Rate Description
7.6 LPM (2.0 GPM)
Approvals
Ignition Protection 8846, CE, IMCI Certified
Consumption
3.5 a
Series
SHURflo Aqua King II Junior
Amps Description
Maximum: 3.5A
Connections Description
13mm (1/2") ID Hose or 15mm push fit
Cut Out Pressure Description
20 PSI / 1.4 Bar
Warranty
3 Years
Downloads
Shurflo AquaKing 2 4129 110 B02
Fresh water diaphragm pump from Shurflo, with redesigned 4 chamber head, fully adjustable sealed pressure switch and heavy duty sealed motor. Built in check-valve, self primes (up to 6 feet), will run dry without damage. Ignition and thermal protection. Heavy duty design provides smoother flow due to 4 chamber head.
• 11.4lpm, 30psi
Maximum Recommended Head
1.8 Metres
Replaces
509506 Shurflo Aqua King Pump, 509404 Flojet R2100 Pressure Pump. Closest alternative for pressure pumps: 509663 - Shurflo 2852, 509682 - Shurflo 2858, 509506 - Floking 3000 pump & 509406 - Flojet R4305.
Self Primes up to
1.82 Metres (6 Feet)
Inlet Outlet
1/2"-14 NPSM Male (13mm)
Brand
SHURflo
Type
Fresh Water Pumps
Voltage Description
12V DC
Model
4139-111
Height Description
104mm (4.1")
Width
124mm (4.9")
Length
208mm (8.2")
Material
Polypro Housings, EPDM Valves / Seals, Santoprene Draphragm, Stainless Steel Hardware
Fuse
7.5A Recommended
Flow Rate Description
11.35 LPM (3.0 GPM)
Approvals
Ignition Protection 8846, CE, IMCI Certified
Consumption
6.5 a
Series
Aqua King II Standard
Amps Description
Maximum: 6.5A
Connections Description
13mm (1/2") ID Hose or 15mm push fit
Cut Out Pressure Description
30 PSI / 2 Bar
Warranty
3 Years
Downloads
Shurflo AquaKing 2 4139 111 B54
The Whale Universal water pressure pump provides smooth and constant water flow thanks to its seamless 4 diaphragm design, and can operate continuously without any damage from dry running.
This water pump has rotating feet to easily fit existing fresh water or saltwater pump systems. It runs quietly and efficiently, combining fantastic safety and reliability with high performance. A clear lid strainer allows for easy inspection and maintenance.
The pump materials are chosen for their suitability for freshwater contact. Only polypropylene, monprene, nitrile and stainless steel making contact with fluid.
The rest of the pump is made up of a glass filled polypropylene pump body and an aluminium and powder-coated steel motor casing. All diaphragms, valves and feet are monprene, the seals are nitrile and fasteners are all made from stainless steel. The Whale Universal pump range is EMC compliant, CE marked and features an ISO8846 rating for particle ingress.
The pump is recommended for supplying 1-2 outlets throughout the boat. These can include taps, showers and other domestic water outlets.
Accumulator Recommended
Yes
Maximum Recommended Head
Discharge Head: 30 Metres (98 Feet)
Self Primes up to
3 Metres (9.8 Feet)
Wire Size
Minimum: 2.5mm² (13 AWG)
Inlet Outlet
Fittings for 15mm Whale Female Quick Connect and 13mm (1/2") BSP / ID Hose
Brand
Whale
Type
Fresh Water Pumps
Voltage Description
12V DC
Model
UF0815
Height Description
125mm (4.9")
Width
230mm (9")
Length
220mm (8.7")
Material
Materials in Contact with Liquid: Glass-filled polypropylene, Monoprene, Nitrile, Stainless Steel
Fuse
5A
Flow Rate Description
8 LPM (2.2 US GPM)
Approvals
EMC Compliant, CE Marked, ISO 8846 MARINE (Ignition)
Series
Universal
Supplied With
Strainer
Cut Out Pressure Description
45 PSI / 3 Bar
Warranty
2 Years
Country of Origin
United Kingdom
OEM version of the 26500 pump - It does not include retail packaging, fittings or connectors.
Shurflo Trail King are fully automatic triple diaphragm positive displacement freshwater pumps with integral pressure switch.
• Quiet Performance
• Runs dry without damage
• Self Priming
• Built-in Check Valve
• Easy Installation
• Enclosed Motor
• Thermally Protected
Key Features
Quiet Performance
Runs dry without damage
Self Priming
Built-in Check Valve
Easy Installation
Enclosed Motor
Thermally Protected
Brand
SHURflo
Type
Fresh Water Pumps
Voltage Description
12V DC
Model
Trail King 7
Flow Rate Description
7LPM
Cut Out Pressure Description
20 PSI / 1.4 Bar