Motorhome Heaters, Water Tanks and Plumbing

The Fiamma A20 expansion tank is designed to enhance the performance of water pumps in various systems by eliminating pulsating pump operation. This helps achieve a smooth and continuous flow of water rather than intermittent bursts. By providing a constant flow of water, the A20 expansion tank contributes to reducing water consumption. The tank's internal diaphragm absorbs water hammer (the pressure surge or shockwaves caused by the sudden stop or change in the flow of water). This helps in preventing damage to the pump and associated components. This 2024 A20 expansion tank has a black finish and is compatible with all Fiamma pumps and other non-Fiamma pumps. Key Features Ensures a smooth and continuous flow of water for improved water distribution Contributes to reduced water consumption Internal diaphragm absorbs water hammer Compatible with all Fiamma pumps and other non-Fiamma pumps Suitable For E.G Fiat Ducato|Volkswagen T6 all campers  Brand Fiamma Type Fresh Water Pumps Country of Origin Italy Manufacturer SKU: 02478-02-

Read more less

Plumbing kit for use when combining both the 62-litre and 92-litre Underslung Water Tanks for Ducato L3/L4 LWB vehicles. Kit contents: 2x 1 1/4" BSPM x 40mm hosetail 2x 1 1/4" BSPM x 40mm hosetail 90 degree 2x 1 1/4" Female tee 1/2" BSP plug 2x 1/2" BSPM x 13mm hosetail 2x 1 1/4" BSPM x 20mm hosetail 2x 1 1/4" x 47.5mm plastic nipple 1 1/4" x 1/2" plastic bush PTFE tape 12mm x 10m Brand Wydale Plastics Model USKTDP Height Description 300mm Width 300mm Depth 200mm Weight 0.6kg Country of Origin United Kingdom

Read more less

Submersible pump fitting kit suitable for our 24, 57 and 100 litre Wheel Arch Water Tanks. Kit contents: 1 x 1/2” BSP 90° bulkhead hose tail 11-13mm 1 x 1/2” BSP back nut 1 x 1/2” BSP gasket 1 x Cable gland 1 x 10 metre roll PTFE tape Brand Wydale Plastics Model WAKS1 Country of Origin United Kingdom  

Read more less

A 51-litre water tank for storing and transporting potable water as well as a wide range of other liquids. Specs: - Capacity: 51 Litres - Specification: Standard camper configuration - Colour: Black - Cap: 5" non-vented screw cap Outlet: 1/2" outlet Brand Wydale Plastics Type Low Profile Water Tanks Model T51FBK5 Height Description 120mm Width 400mm Depth 1200mm Weight 8kg Colour Black Outlet 1/2 BSP Capacity Description 51 Litres Country of Origin United Kingdom   Download Dimensional Drawing T51FBK5

Read more less

Flat 51-litre water tank for storing and transporting water as well as various other liquids. The flat design makes it more stable and easier to store in certain spaces compared to cylindrical tanks. The tank's semi-translucent finish allows you to see the liquid level inside the tank. It comes with a 5-inch plain cap which does not allow air to enter or escape, making it suitable for certain types of liquid storage where exposure to air is undesirable. The tank is equipped with a 1/2-inch BSP (British Standard Pipe) outlet, which is a standard type of threading for pipe connections, ensuring compatibility with a variety of fittings and fixtures. Brand Wydale Plastics Type Low Profile Water Tanks Model T51FNA5 Height Description 120mm Width 400mm Depth 1200mm Weight 8kg Colour Transparent Outlet 1/2" BSP Capacity Description 51 Litres Country of Origin United Kingdom   Downloads Dimensional Drawing T51FNA5

Read more less

A versatile and practical 40-litre water storage tank designed for campervan conversions. The tank is made from WRAS (Water Regulations Advisory Scheme) approved polyethylene, ensuring that the material is suitable and safe for storing potable (drinking) water. It is designed to be underslung, meaning it is mounted underneath the vehicle. This design helps to save space inside the campervan and ensures a low centre of gravity. The tank is designed to fit a wide range of vehicles, making it a versatile choice for various campervan conversion projects. Equipped with eight brass M8 moulded threaded inserts, the tank is easy to mount securely under the vehicle. Two moulded brass vents allow for proper ventilation and pressure regulation within the tank, which is essential for maintaining the integrity of the tank and ensuring smooth water flow. The tank includes a moulded inlet for easy filling and offers flexibility with three different outlet options, one of which includes a sump. Brand Wydale Plastics Type Low Profile Water Tanks Model T40UBK5 Height Description 170mm Width 370mm Depth 750mm Weight 4kg Colour Black Outlet 1 x 1/2" Inlet, 3 x 3/4" Outlet Capacity Description 40 Litres Country of Origin United Kingdom   DownloadDimensional Drawing T40UBK5  

Read more less

This fresh water harness is for use with the EC155 and EC51 system.This is the harness only and does not include the studs and screwsPlease note: This cannot be used with the EC50 control panel

Read more less

The Whale Watermaster On Board Fresh Water Pump delivers a smooth, consistent flow and runs dry without damage. Specs: • Voltage (V d.c.): 12 • Open Flow Rate (per min): 8 ltrs (2.0 GPM) • Cut Out Pressure: 2 bar (30psi) • Recommended Fuse Size: 5 Amp Automotive • Current Draw: 4 amps • Weight: 1.48kg (3.26 lbs) • Inlet/Outlet Size: Whale® Quick Connect 12mm Female Connections • Hose Connections: For 1/2” flexible hose use WU1282. For 3/8” flexible hose use WU1280 • Semi Rigid Pipework System Connections: For Whale® Quick Connect 12mm no adapter required - use 12mm semi rigid pipework WX7112 • Materials in contact with fluid: Glass-filled Polypropylene, Monoprene®, Nitrile®, Stainless Steel • Service Kits: AK1317 - Microswitch Kit, AK1318 - Replacement Head Kit. AK1320 - Strainer • Max. Wire Size: 1.5mm2 (16AWG) • Max. Wire Size: 3m (9ft) • Max. Discharge Head: 20m (66ft) Key Features 20% lighter than Whale Smartflo Vertically mounted Quick Conntect 12mm ports Rubber feet to absorb vibration Fully sealed protective motor cover Brand Whale Type Fresh Water Pumps Voltage Description 12V DC Weight 1.48kg (3.26 lbs) Flow Rate Description 8 LPM (2.0 GPM) Cut Out Pressure Description 30 PSI / 2 Bar  

Read more less

An efficient 12V DC, high-flow, self-priming pump with good performance in an economical footprint. The Jabsco Xylem Par-Max 3 has a dry self-priming capability of 2.13 meters (7ft) and can run dry without damage. It is designed to serve two or more outlets. Pump features include a plastic housing protecting the motors from corrosion, vibration-dampening feet for quiet operation and an integrated, sealed pressure switch for on-demand operation. It has a The pressure-controlled pump is supplied with two 1/2” quick connect straight hosebarb fittings and a quick connect inline 40 mesh strainer. • Voltage: 12V DC • Open flow GPM (LPM): 3 (11) • Shut-off pressure PSI (BAR): 40 (2.8) • Max. current AMPS: 6.2 • Recommended fuse size: 10 • Port fittings: 2 x 1/2" Straight Hosebarb • Dimensions: 9.1” in length, 4.2” in width, 4.2” in height / 231(L) x 107(W) x 107(H)mm Replaces JAB-31395-0392 Self Primes up to Up to 10ft (3m) dry prime Inlet Outlet Fittings for 13mm (1/2") ID hose Brand Jabsco Type Fresh Water Pumps Voltage Description 12V DC Model 31395-4012-3A Size Leads: 12" (305mm), 16 AWG (1.5mm^2) Height Description 108mm Width 108mm Depth 231mm Weight 1.8kg Fuse 10A (not included) Temperature Range Ambient & Fluid: 0°C to 60°C (32°F ‐ 140°F) Flow Rate Description 11 LPM (2.9 US GPM) Approvals ISO 8846 Ignition Protected, C.E Certified, RCM compliant Pressure Rating Operating: 40 PSI (2.8 bar) maximum, Inlet: 30 PSI (2.1 bar) maximum Amps Description 6 Amps at 40 PSI (2.8 BAR) Supplied With Inline Strainer (40 mesh) & Quick Connect Fittings Cut In Pressure 35 PSI Cut Out Pressure Description 40 PSI / 2.8 Bar Downloads Jabsco Par Max Series Brochure en Technical Data Sheet Jabsco Xylem Par Max 3 31395 4012 3A

Read more less

Eliminates the pulsating operation of pressure switch pumps and supplies a constant flow of water at an even pressure. It is suitable for all pressure switch pumps. Brand Fiamma Type Fresh Water Pumps

Read more less

The whale standard submersible pump is a simple, compact and economical solution. It has a long life and is very quiet with a low power consumption. An inexpensive way to update a manual to an electric system, it can be used with pressure and micro switch systems. • Flow rate of 10 lpm • Draw 2.4 amps • 12V Flow Rate 1 Metre Head 8.75 LPM (2.3 US GPM) Flow Rate 3 Metre Head 5.75 LPM (1.5 US GPM) Brand Whale Type Fresh Water Pumps Voltage Description 12V DC Model GP1002 Height Description Overall: 108mm (4-1/4"), Pump: 88mm (3-7/16"), Hose Connector: 20mm (13/16") Length 1m Cable Material Material In Contact with Liquid: ABS Pump Body, Nitrile Seals, Polypropylene Strainer, PBT Impeller, PVC Cable Fuse 5A Flow Rate Description 10.3 LPM Approvals ECD 2004/108/EC, CE mark, EN60335-1:2002, EN60335-2-41:2003, EN55014-1:2006 & A1:2009, EN55014-1:2006, EN55022:2006 & A1:2007 Diameter Description 36mm (1-7/16") Amps Description 2.4A Warranty 1 Year   Downloads Data Sheet

Read more less

The iNet X System enables you to centrally control your indoor climate, hot water or similar, continually keep an eye on key status indicators and much more. - One central operating system: control key appliances from different manufacturers and services with one central operating system. So you will always have everything under control. - Status queries at a glance: real-time status indicators for all appliances and services. So you can always keep an eye on them all. - Intuitive operation: clear and uniform user interface in the panel with colour touch display and app for intuitive operation. So you will be familiar with the system right away. - Advanced control via your smartphone: it is possible to control appliances using your own smartphone with the free Truma iNet X App. Meaning you will be smartly connected. - Future-oriented: add and benefit from further developments by means of updates – even after the system has been installed. So you will always be up-to-date. - Troubleshooting help: detailed, precise description of the fault including recommendations on how to solve the issue yourself rather than cryptic fault codes. Meaning you are independently and safely on the move - Customisable: App interface can be configured according to individual requirements. So everything is geared to your own needs. The Truma iNet X App is the mobile version of the Truma iNet X Panel. The App can be used to set the hot water from the comfort of your bed or to check the indoor climate while relaxing on your lounger. A Bluetooth connection is currently required for this purpose. The App is required to perform updates to your Truma iNet X (Pro) Panel. This is the only way to extend the system and to benefit from future developments. Kit Contents Truma Combi 6E water & blown-air heater Truma iNet X control panel RJ45 connection cable for control panel Combustion air intake & exhaust ducting Intake/exhaust side wall cowl Black and white trims for side wall cowl John Guest (JG) connection kit for water supply Room temperature sensor (cable not supplied - requires 2 x 0.5mm²) Clamps, clips, fittings & fixings Product Code:32366-INET

Read more less