A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. The SmartSolar MPPT 150/70-Tr maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. The charge controller can operate with a battery voltage as low as 0 Volts, providing the cells are not permanently sulphated or otherwise damaged.
Features of the - SmartSolar MPPT 150/70-Tr
MPPT: Ultra Fast Maximum Power Point Tracking
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remote Monitoring and Control
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520.
Optional SmartSolar Control Display
By adding the SmartSolar Control Display you will be able to check the status of your Charger and battery-storage at a glance. Simply plug it into the face of your MPPT charger to provide you with real-time monitoring and set-up capabilities.
Extensive Electronic Protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
Features of the - Victron SmartSolar MPPT 250V/60A - TR
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Flexible charge algorithm
Fully programmable charge algorithm (see the software page on Victron), and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage, temperature and current sensing via Bluetooth
A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers.
Synchronized parallel charging with Bluetooth
Up to 10 units can be synchronized with Bluetooth.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.
Please click the link Below to view Additional information Data Sheet:
Victron SmartSolar MPPT 250V/60A - TR Data Sheet
Victron BlueSolar PWM Light Charge Controller 12/24V 5A
Load output with low battery voltage disconnect function.
Lighting control function, one timer only.
Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting.
Three stage battery charging (bulk, absorption, float), not programmable.
Load output protected against over load and short circuit.
Protected against reverse polarity connection of the solar array and/or battery.
Day/night timing options: see manual for details.
The AVON brand is synonymous with Quality, Durability, High Performance and Value. By sourcing AVON products from the world’s leading factories, and manufacturing them to our exact specifications, we can ensure a Reliable Stockholding, a Premium Quality Alternative and Exceptional Value.
Weight
7 kg
Dimensions
197 × 165 × 170 mm
Brand
AVON
Length (mm)
197
Height (mm)
170
Width (mm)
165
Weight (KG)
7
Capacity (Ah): 20hr
50
Terminal Layout
0
Terminal Type
M6
Export Commodity Code
85076000
Country of Origin
China
The AVON brand is synonymous with Quality, Durability, High Performance and Value. By sourcing AVON products from the world’s leading factories, and manufacturing them to our exact specifications, we can ensure a Reliable Stockholding, a Premium Quality Alternative and Exceptional Value.
Weight
4.5 kg
Dimensions
195 × 133 × 171 mm
Brand
AVON
Length (mm)
195
Height (mm)
171
Width (mm)
133
Weight (KG)
4.5
Capacity (Ah): 20hr
36
Voltage (V)
12
Cycles
2000
Terminal Layout
1
Terminal Type
M6
Technology
LIPO4
Export Commodity Code
85076000
Country of Origin
China
With a 200W 12V Sunshine Solar Flexible ETFE Range Kit you could expect to generate around 56 amps per day when used in conjunction with the Single Battery Controller supplied with the kit as standard. This figure is the same when used in conjunction with the upgrade option of a Dual Battery Controller, however the MPPT Dual & Single Battery Controller upgrade options offer 10%-30% more solar power generation depending on the solar panel specifications, in short the higher the solar panels open circuit voltage (Voc) the harder an MPPT Controller works to maximise the power generated. With this 200W Kit that equates to around 67 amps per day with an MPPT solar controller during the summer months.
This Sunshine Solar Power Caravan & Motorhome Kit includes a choice of either a single battery charge controller for one battery bank typically used in caravan solar set-ups or a dual battery controller for optimised battery charging of two battery banks useful for those of you wishing to keep both starter and leisure batteries charged commonly used in motorhome solar set-ups.
If you are a competent DIYer this kit has everything you need for a professional looking finish. If you require the services of an installer please contact our Customer Services on 01508 488188.Solar Panel Specifications
High Efficiency Monocrystalline Cells
Maximum Power (Pmax): 200W
Maximum Power Current (Ipm): 11.1A
Maximum Power Voltage (Vpm): 18.00V
Short Circuit Current (Isc): 11.9A
Open Circuit Voltage (Voc): 21.6V
Nominal Operating Cell Temp. (NOCT): -45 to 80°C
Maximum System Voltage: DC600V
Size: 1600 x 830 x 4mm
Kit Features
1 x 200W 12V Sunshine Solar Flexible ETFE Range
1 x Solar Battery Controller 20A - 12V/24V
1 x 6m Extension Cable & Connectors
1 x ABS Cable Entry Cover
Solar Performance Guarantee
1 Year Manufacturers Warranty
S-S type compatible in-line switch.
This 200mm extension cable is fitted with S-S type connectors on both ends and a switch in the middle.
Ideal for use in solar lighting kits.
Cable Specification
0.75mm max 5A
With a 185W Sunshine Solar Caravan & Motorhome Kit you could expect to generate around 52 amps per day when used in conjunction with the Single Battery Controller supplied with the kit as standard. This figure is the same when used in conjunction with the upgrade option of a Dual Battery Controller, however the MPPT Dual & Single Battery Controller upgrade options offer 10%-30% more solar power generation depending on the solar panel specifications, in short the higher the solar panels open circuit voltage (Voc) the harder an MPPT Controller works to maximise the power generated. With this 185W Kit that equates to around 62 amps per day with an MPPT solar controller during the summer months.
This 185W Sunshine Solar Caravan & Motorhome Kit includes a single battery charge controller for one battery bank as standard with the option to upgrade to a dual battery controller for optimised battery charging of two battery banks. Our MPPT versions are perfect for those customers wishing to maximise the solar power generated.
Specifications
Product Code. SSP185MS
Max Power. 185W ± 3%
Max Power Voltage. 18V
Max Power Current. 10.3A
Open Circuit Voltage. 21.6V
Short Circuit Current. 11.2A
Nominal Operating Cell Temp. -45 to 80°C
Max System Voltage. DC600V
Dimensions. 1470 x 660 x 35mm
Weight: 11.2kg
Features
900mm of 4mm single-core cable fitted with MC Type 4 Connectors
High Performance Monocrystalline Cells
Factory fitted aluminium frame with pre-drilled mounting holes
Multiple pieces can be connected to acquire higher power
Suitable for charging all types of 12 volt batteries
Fitted with bypass diodes to minimise the effect of shading
Completely weatherproof
Guaranteed Performance
5 Years Manufacturers Warranty
10 Years Warranty 90% Power Output
20 Years Warranty 80% Power Output
Suitable Solar Charge Controllers
PWM Solar Controller 20A - 12/24V
Dual Battery Controller 20A - 12/24V
MPPT Solar Controller 20A - 12/24V (10% - 30% more power generation)
Dual MPPT Solar Controller 20A - 12/24V (10% - 30% more power generation)
This Sunshine Solar Flexible ETFE 100W 12V boasts ultra-pure silicon delivering optimal power conversion. The aluminum backing adds massive strength, preventing corrosion and helping with heat dissipation. Thin, light, and when fitted to the roof of a caravan or motorhome very aerodynamic.
Lightweight design combined with high-efficiency cells and solar panel flexibility makes our latest ETFE range also perfect for marine use and many more applications where a rigid framed solar panel is not an option.
Description
With a Sunshine Flexible ETFE 120W 12V solar panel, you could expect to generate around 34 amps per day when used in conjunction with a PWM solar charge controller and 40 amps per day when used with an MPPT solar controller during the summer months. Multiple panels can be connected to acquire higher power if needed.
Solar Panel Specifications
Maximum Power (Pmax): 120W
Maximum Power Current (Ipm): 6.7A
Maximum Power Voltage (Vpm): 18V
Short Circuit Current (Isc): 7.2
Open Circuit Voltage (Voc): 21.6V
Nominal Operating Cell Temp. (NOCT): -45 to 80°C
Maximum System Voltage: DC600V
Maximum Series Fuse: 9A
Size: 1030 x 665 x 4mm
Weight:.3.65 kg
Features
3° flexibility or 3cm per 1m of panel length
ETFE rough scratch-resistant surface which can be walked on in deck shoes.
Aluminum Substrate
Highly efficient monocrystalline cells
Can be conveniently placed on slightly curved solid surfaces
Can be easily bonded using fixing adhesive (no need for drilling)
4mm Single Core Cable fitted with type MC4 Connectors (length 900mm)
One-Year Manufacturers Warranty
Please Click PDF to View More Info On The Installation and Maintenance Of This Product.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
Features of the - Victron SmartSolar MPPT 150V/60A - TR
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Flexible charge algorithm
Fully programmable charge algorithm (see the software page on Victron), and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage, temperature and current sensing via Bluetooth
A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers.
Synchronized parallel charging with Bluetooth
Up to 10 units can be synchronized with Bluetooth.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.
PRODUCT CODE: SCC115060211
Please click the link below to view additional Information:
Victron SmartSolar MPPT 150V/60A - TR Additional Information
This collection was generated by the Seguno app for use in email marketing and is not available on any sales channels. By default, it is configured to show your best-selling products that are in stock and not free.
