The only self-priming pump with incorporated filter and anti-vibration Silent Plate included. The Aqua 8 pumps water vertically over 3m with no priming. The stainless steel filter prevents impurities from entering and is easily cleaned so the pump lasts longer. An automatic pressure switch starts and stops the pump by opening and closing the valve. Brand Fiamma Type Fresh Water Pumps Voltage Description 12V DC Weight 1.5kg Noise 65/70 db Flow Rate Description 10 LPM Consumption 3.4 a Cut In Pressure 21.75 PSI Cut Out Pressure Description 21 PSI / 1.4 Bar

Read more less

Jabsco Q401J-112S-3A freshwater delivery pump Par Max HD4 is an efficient, self-priming pump with high flow output for serving four or more outlets. The Jabsco multi-diaphragm design self primes to 2.4m vertical lift and can run dry without damage. Supplied with 40-mesh inline Quick Connect strainer. The Jabsco pump can be used for the following applications: Washdown, Livewell Circulation, Freshwater Delivery (galley, shower, washing machine), Shower Drain, Baitwell, General Purpose and Auxiliary Bilge. This drinking water pressure pump replaces the following Jabsco pressure pumps: 31620‐0292, 32600‐0092, 82400‐0392, 82500‐0392 and 82600‐0392. Jabsco Pump Spares for Q401J-112S-3A: # | Item | Part Number 1 | Port Clips | 30647‐1000 2 | Switch Kit | 16470‐0025 3 | Check Valve Assembly | 18753‐0731 4 | Diaphragm & Drive Assembly | 18753‐0730 5 | Baseplate & Mounting Feet | 18753‐0729 Key Features Heavy Duty, Coated Motor Integrated Sealed Pressure Switch Efficient, quiet operation Self‐priming Runs Dry without Damage Quick Connect Ports Noise Dampening Baseplate Thermal Motor Protection (TCO) Accumulator Recommended Yes Dimensions Distance between mounting hole centres: 50mm x 90mm (2" x 3.6") Maximum Pressure Inlet: 30 PSI (2.1 Bar) Replaces Jabsco 31620‐0292, 32600‐0092, 82400‐0392, 82500‐0392 & 82600‐0392, WP-014 & 509736. Closest Alternative for Jabsco 52600-0292 PAR-Max 7 Pump Self Primes up to 2.4 Metres (7.9 Feet) Wire Size 2.5mm2 (14 AWG) Inlet Outlet Fittings for 13mm (1/2") ID hose Brand Jabsco Type Fresh Water Pumps Voltage Description 12V DC Model Q401J-112S-3A Height Description 97mm (3.8") Width 109mm (4.3") Length Pump: 239mm (9.4"), Cable: 305mm (12") Material Upper Housing*: Fibre reinforced polypropylene, Lower Housing: Cast Aluminium, Check Valve Retainer*: Polypropylene, Diaphragm*: Santoprene, Check Valves*: EPDM, Switch diaphragm*: EPDM, Bypass Diaphragm*: EPDM, PH Seals*: EPDM, PH Fasteners: Stainless Steel, Baseplate: Plastic & rubber feet, Motor Casing: Cast Aluminium; Coated Steel. (*in contact with water) Fuse 15A (Not Included) Temperature Range Ambient: 0°C ‐ 60°C (32°F ‐ 140°F), Fluid: 0°C ‐ 60°C (32°F ‐ 140°F) Flow Rate Description 15.1 LPM (4 US GPM) Approvals CE - EMC/EMI, EN 60945 (Marine) EN 61000-6-3 (residential, commercial, & light industrial) EN 55014-1 (Household appliance, electrical tools, & similar products), RCM, WEEE, RoHSII, ISO8846 Marine (Ignition Protected) Series Par-Max HD4 Amps Description Maximum: 8A (at 25 PSI / 1.7 Bar) Cut Out Pressure Description 25 PSI / 1.7 Bar Warranty 3 Years Downloads jabsco par max hd manual q401j 112s 3a pump data sheet

Read more less

Jabsco 31395-2512 water pressure pump system is fitted with a built-in pulsation dampening by-pass to control unwanted cycling and noise. The Jabsco water pressure system also comes complete with quick connect fittings - for ease of pump installation - as well as an inline strainer. The Jabsco Par-Max 3 pump replaces Jabsco 31395-0292 Par-Max 2.9 pressure pumps. Jabsco Pump 31395-2512-3A Spare Parts: Part ID | Spare Part | Part Number 1 | Port Clips | 30647‐1000 2 | Switch Kit | 18916‐1025 3 | Check Valve Assembly| 20407034 4 | Diaphragm/Drive Assembly | Not offered 5 | Baseplate/Mounting Feet | 20717001A Key Features Enclosed motor Integrated Pressure Switch Vibration & Noise reducing mounting Self‐priming Runs Dry without Damage Replaces Jabsco 31395-0292 Par Max 2.9, WP-001 & 509732 Self Primes up to 1.8 Metres (5.9 Feet) Inlet Outlet Fittings for 13mm (1/2") ID hose Brand Jabsco Type Fresh Water Pumps Voltage Description 12V DC Model 31395-2512-3A Height Description 110mm (4.3") Width 152mm (6") Length 230mm (9") Fuse 10A Flow Rate Description 11 LPM (2.9 US GPM) Approvals Complies with ISO8846 Marine (Ignition protection) Series Par Max 3 Amps Description 5.2A Supplied With Quick Connect Fittings & Inline Strainer Cut In Pressure 15 PSI / 1 Bar Cut Out Pressure Description 25 PSI / 1.7 Bar Warranty 3 Years Downloads parmax 3 datasheet 31395 2512 3a

Read more less

Jabsco 31395-2524 water pressure pump system is fitted with a built-in pulsation dampening by-pass to control unwanted cycling and noise. The Jabsco water pressure system also comes complete with quick connect fittings - for ease of pump installation - as well as an inline strainer. This pump replaces the Jabsco 31395-0294 Par-Max 2.9 pressure pumps. Jabsco Par-Max 3 Pump Features: - Enclosed motor - Integrated Pressure Switch - Vibration & Noise reducing mounting - Self‐priming - Runs Dry without Damage Jabsco Pump 31395-2524-3A Spare Parts: Part ID | Spare Part | Part Number 1 | Port Clips | 30647‐1000 2 | Switch Kit | 18916‐1025 3 | Check Valve Assembly| 20407034 4 | Diaphragm/Drive Assembly | Not offered 5 | Baseplate/Mounting Feet | 20717001A Replaces Jabsco 31395-0294 Par Max 2.9 Self Primes up to 1.8 Metres (5.9 Feet) Inlet Outlet Fittings for 13mm (1/2") ID hose Brand Jabsco Type Fresh Water Pumps Voltage Description 24V DC Model 31395-2524-3A Height Description 110mm (4.3") Width 152mm (6") Length 230mm (9") Fuse 5A Flow Rate Description 11 LPM (2.9 US GPM) Approvals Complies with ISO8846 Marine (Ignition protection) Series Par Max 3 Amps Description 2.6A Supplied With Quick Connect Fittings & Inline Strainer Cut In Pressure 15 PSI / 1 Bar Cut Out Pressure Description 25 PSI / 1.7 Bar Warranty 3 Years   Downloads parmax 3 datasheet 31395 2524 3a

Read more less

Jabsco Par Max 2 water pressure pumps are internally grounded and have a three chamber diaphragm on demand pump with the performance characteristics to match the needs of a typical vessel with a shower, water heating and up to three faucets. The Jabsco 31295-3512-3A water pressure controlled pump is designed for vessels requiring a smooth low flow pump at an attractive low price. The water pressure pump is fitted with a built-in pulsation dampening by-pass to control unwanted cycling and noise. Quick connection fittings are included as standard for ease of pump installation, as well as a 40 mesh inline strainer. Jabsco 31295-3512-3A Pressure Pump Features & Benefits: - Enclosed motor - Integrated Pressure Switch - Vibration & Noise reducing mounting - Self‐priming - Runs Dry without Damage Replaces Jabsco 31295‐0092 Par Max 1.9 Pumps Self Primes up to 3 Metres (9.8 Feet) Vertical Lift Inlet Outlet Fittings for 13mm (1/2") ID hose Brand Jabsco Type Fresh Water Pumps Voltage Description 12V DC Model 31295-3512-3A Size Leads: 305mm (12"), 1.5mm2 (16 AWG) Height Description 107mm (4.2") Width 107mm (4.2") Length 231mm (9.1") Fuse 10A (not included) Temperature Range Ambient & Fluid: 0°C to 60°C (32°F ‐ 140°F) Flow Rate Description 7.6 LPM (2 US GPM) Approvals ISO 8846 MARINE (ignition protection), CSA Listed, C.E Certified Pressure Rating Operating: 25 PSI (1.7 bar) maximum, Inlet: 30 PSI (2.1 bar) maximum Series Par Max 2 Amps Description 6A (at 35 PSI / 1.7 bar) Supplied With Inline Strainer (40 Mesh) & Quick Connect Fittings Cut In Pressure 15 PSI / 1 Bar Cut Out Pressure Description 35 PSI / 2.4 Bar Warranty 3 Years   Downloads parmax 2 datasheet 31295 3512 3a

Read more less

The Jabsco Par Max 2 water pressure controlled pump is designed for vessels requiring a smooth low flow pump at an attractive low price. Jabsco Par Max 2 water pressure pumps are internally grounded and have a three chamber diaphragm on demand pump with the performance characteristics to match the needs of a typical vessel with a shower, water heating and up to three faucets. The water pressure pump is fitted with a built-in pulsation dampening by-pass to control unwanted cycling and noise. Quick connection fittings are included as standard for ease of pump installation, as well as a 40 mesh inline strainer. Jabsco Par Max Pressure Pump Features & Benefits: - Enclosed motor - Integrated Pressure Switch - Vibration & Noise reducing mounting - Self‐priming - Runs Dry without Damage Replaces Jabsco 31295‐0094 Par Max 1.9 Pumps & 42630‐2994‐P. Closest Alternative for 509409 Flojet R4305 Pressure Pump & 42630‐3994‐P. Self Primes up to 3 Metres (9.8 Feet) Vertical Lift Inlet Outlet Fittings for 13mm (1/2") ID hose Brand Jabsco Type Fresh Water Pumps Voltage Description 24V DC Model 31295-3524-3A Size Leads: 305mm (12"), 1.5mm2 (16 AWG) Height Description 107mm (4.2") Width 107mm (4.2") Length 231mm (9.1") Fuse 5A (not included) Temperature Range Ambient & Fluid: 0°C to 60°C (32°F ‐ 140°F) Flow Rate Description 7.6 LPM (2 US GPM) Approvals ISO 8846 MARINE (ignition protection), CSA Listed, C.E Certified Pressure Rating Operating: 25 PSI (1.7 bar) maximum, Inlet: 30 PSI (2.1 bar) maximum Series Par Max 2 Amps Description 3A (at 35 PSI / 1.7 bar) Supplied With Inline Strainer (40 Mesh) & Quick Connect Fittings Cut In Pressure 15 PSI / 1 Bar Cut Out Pressure Description 35 PSI / 2.4 Bar Warranty 3 Years   Downloads parmax 2 datasheet 31295 3524 3a

Read more less

An efficient 12V DC, high-flow, self-priming pump with good performance in an economical footprint. The Jabsco Xylem Par-Max 3 has a dry self-priming capability of 2.13 meters (7ft) and can run dry without damage. It is designed to serve two or more outlets. Pump features include a plastic housing protecting the motors from corrosion, vibration-dampening feet for quiet operation and an integrated, sealed pressure switch for on-demand operation. It has a The pressure-controlled pump is supplied with two 1/2” quick connect straight hosebarb fittings and a quick connect inline 40 mesh strainer. • Voltage: 12V DC • Open flow GPM (LPM): 3 (11) • Shut-off pressure PSI (BAR): 40 (2.8) • Max. current AMPS: 6.2 • Recommended fuse size: 10 • Port fittings: 2 x 1/2" Straight Hosebarb • Dimensions: 9.1” in length, 4.2” in width, 4.2” in height / 231(L) x 107(W) x 107(H)mm Replaces JAB-31395-0392 Self Primes up to Up to 10ft (3m) dry prime Inlet Outlet Fittings for 13mm (1/2") ID hose Brand Jabsco Type Fresh Water Pumps Voltage Description 12V DC Model 31395-4012-3A Size Leads: 12" (305mm), 16 AWG (1.5mm^2) Height Description 108mm Width 108mm Depth 231mm Weight 1.8kg Fuse 10A (not included) Temperature Range Ambient & Fluid: 0°C to 60°C (32°F ‐ 140°F) Flow Rate Description 11 LPM (2.9 US GPM) Approvals ISO 8846 Ignition Protected, C.E Certified, RCM compliant Pressure Rating Operating: 40 PSI (2.8 bar) maximum, Inlet: 30 PSI (2.1 bar) maximum Amps Description 6 Amps at 40 PSI (2.8 BAR) Supplied With Inline Strainer (40 mesh) & Quick Connect Fittings Cut In Pressure 35 PSI Cut Out Pressure Description 40 PSI / 2.8 Bar Downloads Jabsco Par Max Series Brochure en Technical Data Sheet Jabsco Xylem Par Max 3 31395 4012 3A

Read more less

An efficient 24V DC, high-flow, self-priming pump with good performance in an economical footprint. The Jabsco Xylem Par-Max 3 has a dry self-priming capability of 2.13 meters (7ft) and can run dry without damage. It is designed to serve two or more outlets. Pump features include a plastic housing protecting the motors from corrosion, vibration-dampening feet for quiet operation and an integrated, sealed pressure switch for on-demand operation. The pressure-controlled pump is supplied with two 1/2" quick connect straight hose barb fittings and a quick connect inline 40 mesh strainer. • Voltage: 24V DC • Open flow: 3 GPM (11 LPM) • Shut-off pressure: 40 PSI (2.8 BAR) • Max. current: 3.1 Amps • Recommended fuse size: 5A • Port fittings: 2x 1/2" Straight Hose barb • Dimensions: 9.1" (231mm) in length, 4.2" (107mm) in width, 4.2" (107mm) in height Replaces JAB-31395-0394 Self Primes up to Up to 10ft (3m) dry prime Inlet Outlet Fittings for 13mm (1/2") ID hose Brand Jabsco Type Fresh Water Pumps Voltage Description 24V DC Model 31395-4024-3A Size Leads: 12" (305mm), 16 AWG (1.5mm^2) Height Description 108mm Width 108mm Depth 231mm Weight 1.8kg Fuse 5A (not included) Temperature Range Ambient & Fluid: 0°C to 60°C (32°F ‐ 140°F) Flow Rate Description 11 LPM (2.9 US GPM) Approvals ISO 8846 Ignition Protected, C.E Certified, RCM compliant Pressure Rating Operating: 40 PSI (2.8 bar) maximum, Inlet: 30 PSI (2.1 bar) maximum Amps Description 3 Amps at 40 PSI (2.8 BAR) Supplied With Inline Strainer (40 mesh) & Quick Connect Fittings Cut In Pressure 15 PSI Cut Out Pressure Description 40 PSI / 2.8 Bar Downloads Jabsco Par Max Series Brochure en Technical Data Sheet Jabsco Xylem Par Max 3 31395 4024 3A

Read more less

The Jabsco Xylem Par-Max HD4 24V DC freshwater delivery pump features a wide diameter motor (compared to non-HD models) with a powder-coated shell, cast aluminium endbells and lower housing to improve pressure capability and life. The pump delivers exceptional performance and has a dry self-priming capability of 2.13 meters (7ft) and can run dry without damage. It is designed to serve four or more outlets. Pump features include vibration-dampening feet for quiet operation and an integrated, sealed pressure switch for on-demand operation. The pump is supplied with two 1/2” quick connect straight hosebarb fittings and a quick connect inline 40 mesh strainer.  Voltage: 24V DC Open flow GPM (LPM): 4 (15) Shut-off pressure PSI (BAR): 25 (1.7) EU only Max. current AMPS: 4.0 Recommended fuse size: 10 Port fittings: 2 x 1/2" Straight Hosebarb Dimensions: 9.4” in length, 4.1” in width, 3.8” in height / 239(L) x 104(W) x 97(H)mm Replaces 509738 Self Primes up to Up to 8ft (2.4m) dry prime Inlet Outlet Fittings for 13mm (1/2") ID hose Brand Jabsco Type Fresh Water Pumps Voltage Description 24V DC Model Q402J-112S-3A Size Leads: 12" (305mm), 14 AWG (2.5mm^2) Height Description 97mm Width 104mm Depth 239mm Weight 2.92kg Fuse 10A (not included) Temperature Range Ambient & Fluid: 0°C to 60°C (32°F ‐ 140°F) Flow Rate Description 15 LPM (4 US GPM) Approvals ISO 8846 Ignition Protected, C.E Certified, RCM compliant Pressure Rating Operating: 25 PSI (1.7 bar) maximum, Inlet: 30 PSI (2.1 bar) maximum Amps Description 4 Amps at 25 PSI (1.7 BAR) Supplied With Inline Strainer (40 mesh) & Quick Connect Fittings Cut In Pressure 10 PSI Cut Out Pressure Description 25 PSI / 1.7 Bar     Downloads Jabsco Par Max Series Brochure en Technical Data Sheet Jabsco Xylem Par Max HD4 Q402J 112S 3A

Read more less

The Jabsco Xylem Par-Max HD4 24V DC freshwater delivery pump features a wide diameter motor (compared to non-HD models) with a powder-coated shell, cast aluminium endbells and lower housing to improve pressure capability and life. The pump delivers exceptional performance and has a dry self-priming capability of 2.13 meters (7ft) and can run dry without damage. It is designed to serve four or more outlets. Pump features include vibration-dampening feet for quiet operation and an integrated, sealed pressure switch for on-demand operation. The pump is supplied with two 1/2” quick connect straight hosebarb fittings and a quick connect inline 40 mesh strainer. • Voltage: 24V DC • Open flow GPM (LPM): 4 (15) • Shut-off pressure PSI (BAR): 40 (2.8) • Max. current AMPS: 5.0 • Recommended fuse size: 10 • Port fittings: 2 x 1/2" Straight Hosebarb • Dimensions: 9.4” in length, 4.1” in width, 3.8” in height / 239(L) x 104(W) x 97(H)mm Replaces 509739 Self Primes up to Up to 8ft (2.4m) dry prime Inlet Outlet Fittings for 13mm (1/2") ID hose Brand Jabsco Type Fresh Water Pumps Voltage Description 24V DC Model Q402J-115S-3A Size Leads: 12" (305mm), 14 AWG (2.5mm^2) Height Description 97mm Width 104mm Depth 239mm Weight 2.88kg Fuse 10A (not included) Temperature Range Ambient & Fluid: 0°C to 60°C (32°F ‐ 140°F) Flow Rate Description 15 LPM (4 US GPM) Approvals ISO 8846 Ignition Protected, C.E Certified, RCM compliant Pressure Rating Operating: 40 PSI (2.8 bar) maximum, Inlet: 30 PSI (2.1 bar) maximum Amps Description 5 Amps at 40 PSI (2.8 BAR) Supplied With Inline Strainer (40 mesh) & Quick Connect Fittings Cut In Pressure 15 PSI Cut Out Pressure Description 40 PSI / 2.8 Bar Downloads Jabsco Par Max Series Brochure en Technical Data Sheet Jabsco Xylem Par Max HD4 Q402J 115S 3A

Read more less

Fresh water diaphragm pump from Shurflo, with redesigned 4 chamber head, fully adjustable sealed pressure switch and heavy duty sealed motor. Built in check-valve, self primes (up to 6 feet), will run dry without damage. Ignition and thermal protection. Heavy duty design provides smoother flow due to 4 chamber head. • 7.6lpm, 20psi Maximum Recommended Head 1.8 Metres Replaces 509502 - SHURflo Aqua King Junior 12v Fresh Water Pressure Pump Self Primes up to 1.82 Metres (6 Feet) Inlet Outlet 1/2"-14 NPSM Male (13mm) Brand SHURflo Type Fresh Water Pumps Voltage Description 12V DC Model 4129-110 Height Description 104mm (4.1") Width 124mm (4.9") Length 208mm (8.2") Material Polypro Housings, EPDM Valves / Seals, Santoprene Draphragm, Stainless Steel Hardware Fuse 5A Recommended Flow Rate Description 7.6 LPM (2.0 GPM) Approvals Ignition Protection 8846, CE, IMCI Certified Consumption 3.5 a Series SHURflo Aqua King II Junior Amps Description Maximum: 3.5A Connections Description 13mm (1/2") ID Hose or 15mm push fit Cut Out Pressure Description 20 PSI / 1.4 Bar Warranty 3 Years     Downloads Shurflo AquaKing 2 4129 110 B02

Read more less

The Whale Universal water pressure pump provides smooth and constant water flow thanks to its seamless 4 diaphragm design, and can operate continuously without any damage from dry running. This water pump has rotating feet to easily fit existing fresh water or saltwater pump systems. It runs quietly and efficiently, combining fantastic safety and reliability with high performance. A clear lid strainer allows for easy inspection and maintenance. The pump materials are chosen for their suitability for freshwater contact. Only polypropylene, monprene, nitrile and stainless steel making contact with fluid. The rest of the pump is made up of a glass filled polypropylene pump body and an aluminium and powder-coated steel motor casing. All diaphragms, valves and feet are monprene, the seals are nitrile and fasteners are all made from stainless steel. The Whale Universal pump range is EMC compliant, CE marked and features an ISO8846 rating for particle ingress. The pump is recommended for supplying 1-2 outlets throughout the boat. These can include taps, showers and other domestic water outlets. Accumulator Recommended Yes Maximum Recommended Head Discharge Head: 30 Metres (98 Feet) Self Primes up to 3 Metres (9.8 Feet) Wire Size Minimum: 2.5mm² (13 AWG) Inlet Outlet Fittings for 15mm Whale Female Quick Connect and 13mm (1/2") BSP / ID Hose Brand Whale Type Fresh Water Pumps Voltage Description 12V DC Model UF0815 Height Description 125mm (4.9") Width 230mm (9") Length 220mm (8.7") Material Materials in Contact with Liquid: Glass-filled polypropylene, Monoprene, Nitrile, Stainless Steel Fuse 5A Flow Rate Description 8 LPM (2.2 US GPM) Approvals EMC Compliant, CE Marked, ISO 8846 MARINE (Ignition) Series Universal Supplied With Strainer Cut Out Pressure Description 45 PSI / 3 Bar Warranty 2 Years Country of Origin United Kingdom

Read more less