The Top-Drive System Semi-Air solution for light commercial vehicles is air springs that are applied to the rear axle, interposed between the axle and the chassis with the aim of minimising the vibrations due to the impact of the limit switch buffer, an inevitable phenomenon when the vehicle is near the load limit.
The compressor plus option offers full control, allowing each side to be inflated and deflated independently for comfort throughout.
Top-Drive - Standard Air Suspension with Compressor Plus
This is the best selling product, suited to most general requirements. The Standard air springs are designed to withstand an average and not too heavy useful load. This feature makes the air springs extremely versatile and robust and is the main choice for those entering the world of air springs.
In some cases, where the vehicle load is not excessive, but sporadically reaches the maximum allowed, it is the most suitable and suggested solution, offering a more balanced choice to a specific need. The standard air suspension solves the problem of loading vehicles and frees the user from an otherwise complicated choice, allowing them to focus more on their work.
Features:
- Double Convolute Leaf Spring 6"
- ISO 9001:2015 Certified Management System
- Strong and universal air spring, no need for a rebound pad inside.
- Recommended for light and medium load but suitable for all vehicles.
- Very quick to install, good for composite leaf spring.
- Suitable for FIAT Ducato X250 to X290 chassis cabs.
Contents:
- Pre assembled air springs (left and right)
- Vehicle-specific harware kit (2x locking plates, 2x M10 screws, 4x M8 round screws and 2x grommets)
- Hose set (6m red pipe and 6m black pipe)
- Compressor +
- Dashboard panel
- Reference and lot number stickers
- Pressure range stickers
- Cable ties x 20
- Mounting instructions
Specification
Dimensions
Distance between fixing hole centres: 118.5mm
Brand
Top-Drive
Height Description
174.5mm
Temperature Range
-35°C to +70°C
Diameter Description
OD: 148.4mm
Country of Origin
Italy
Download
td 4075511 series datasheet
The Top-Drive System Semi-Air solution for light commercial vehicles is air springs that are applied to the rear axle, interposed between the axle and the chassis with the aim of minimising the vibrations due to the impact of the limit switch buffer, an inevitable phenomenon when the vehicle is near the load limit.
Top-Drive - Light Air Suspension
In some cases, only a little bit of help is required for the already sufficient load capacities of the vehicle to be enhanced. To preserve its structural integrity in sporadic cases of excessive load, Top-Drive have developed functional versions with a low cost that can offer a real Top Drive System only when needed. This makes the system almost invisible in standard working conditions.
Features:
- Single Convolute Air Spring 6"
- ISO 9001:2015 Certified Management System
- Suitable for customers with low budget or for lightweight vehicles like vans.
- Very quick to install, good for composite leaf spring.
- Suitable for FIAT Ducato X250 to X290 chassis cabs.
Contents:
- Pre assembled air springs (left and right)
- Vehicle-specific harware kit (2x locking plates, 2x M10 screws, 4x M8 round screws and 2x grommets)
- Hose set (6m red pipe and 6m black pipe)
- Simple inflating assembly
- Reference and lot number stickers
- Pressure range stickers
- Cable ties x 20
- Mounting instructions
Specification
Dimensions
Distance between fixing hole centres: 118.5mm
Brand
Top-Drive
Height Description
155mm
Temperature Range
-35°C to +70°C
Diameter Description
OD: 155mm
Country of Origin
Italy
Download
td 4075512 series datasheet
The Top-Drive System Semi-Air solution for light commercial vehicles is air springs that are applied to the rear axle, interposed between the axle and the chassis with the aim of minimising the vibrations due to the impact of the limit switch buffer, an inevitable phenomenon when the vehicle is near the load limit.
Top-Drive - Reinforced Air Suspension
When the vehicle is particularly subjected to stress, or when the permanent load is always at the limit of its capacity, Top-Drive standard versions may not be enough. Top Drive System offers reinforced air suspension versions, which meet these demanding load requirements.
The solution provides an air spring that has larger dimensions compared to the standard version for the corresponding vehicle, in a way that redistributes the load over a larger surface, always with a view to preserve the mechanical structural parts of the vehicle.
Features:
- Double Convolute Air Spring 8"
- ISO 9001:2015 Certified Management System
- Super strong air spring, no need for a rebound pad inside, made for one step ahead loads.
- Recommended for medium and heavy loads lile long wheelbase, long overhang and/or motorbike holder.
- Quick to install, no need to remove U-bolt.
- Suitable for FIAT Ducato X250 to X290 chassis cabs.
Contents:
- Pre assembled air springs (left and right)
- Vehicle-specific harware kit (2x locking plates, 2x M10 screws, 4x M8 round screws and 2x grommets)
- Hose set (6m red pipe and 6m black pipe)
- Simple inflating assembly
- Reference and lot number stickers
- Pressure range stickers
- Cable ties x 20
- Mounting instructions
Specification
Dimensions
Distance between fixing hole centres: 135mm
Brand
Top-Drive
Height Description
75mm minimum, 245mm maximum
Temperature Range
-35°C to +70°C
Diameter Description
OD: 155mm, 220mm maximum
Country of Origin
Italy
Download
td 4075519 series datasheet
The Top-Drive System Semi-Air solution for light commercial vehicles is air springs that are applied to the rear axle, interposed between the axle and the chassis with the aim of minimising the vibrations due to the impact of the limit switch buffer, an inevitable phenomenon when the vehicle is near the load limit.
Top-Drive - Reinforced Air Suspension with Compressor
When the vehicle is particularly subjected to stress, or when the permanent load is always at the limit of its capacity, Top-Drive standard versions may not be enough. Top Drive System offers reinforced air suspension versions, which meet these demanding load requirements.
The solution provides an air spring that has larger dimensions compared to the standard version for the corresponding vehicle, in a way that redistributes the load over a larger surface, always with a view to preserve the mechanical structural parts of the vehicle.
Features:
- Double Convolute Air Spring 8"
- ISO 9001:2015 Certified Management System
- Super strong air spring, no need for a rebound pad inside, made for one step ahead loads.
- Recommended for medium and heavy loads lile long wheelbase, long overhang and/or motorbike holder.
- Quick to install, no need to remove U-bolt.
- Suitable for FIAT Ducato X250 to X290 chassis cabs.
Contents:
- Pre assembled air springs (left and right)
- Vehicle-specific harware kit (2x locking plates, 2x M10 screws, 4x M8 round screws and 2x grommets)
- Hose set (6m red pipe and 6m black pipe)
- Compressor
- Dashboard panel
- Reference and lot number stickers
- Pressure range stickers
- Cable ties x 20
- Mounting instructions
Specification
Dimensions
Distance between fixing hole centres: 135mm
Brand
Top-Drive
Height Description
75mm minimum, 245mm maximum
Temperature Range
-35°C to +70°C
Diameter Description
OD: 155mm, 220mm maximum
Country of Origin
Italy
Download
td 4075519 series datasheet
The Top-Drive System Semi-Air solution for light commercial vehicles is air springs that are applied to the rear axle, interposed between the axle and the chassis with the aim of minimising the vibrations due to the impact of the limit switch buffer, an inevitable phenomenon when the vehicle is near the load limit.
The compressor plus option offers full control, allowing each side to be inflated and deflated independently for comfort throughout.
Top-Drive - Reinforced Air Suspension with Compressor Plus
When the vehicle is particularly subjected to stress, or when the permanent load is always at the limit of its capacity, Top-Drive standard versions may not be enough. Top Drive System offers reinforced air suspension versions, which meet these demanding load requirements.
The solution provides an air spring that has larger dimensions compared to the standard version for the corresponding vehicle, in a way that redistributes the load over a larger surface, always with a view to preserve the mechanical structural parts of the vehicle.
Features:
- Double Convolute Air Spring 8"
- ISO 9001:2015 Certified Management System
- Super strong air spring, no need for a rebound pad inside, made for one step ahead loads.
- Recommended for medium and heavy loads lile long wheelbase, long overhang and/or motorbike holder.
- Quick to install, no need to remove U-bolt.
- Suitable for FIAT Ducato X250 to X290 chassis cabs.
Contents:
- Pre assembled air springs (left and right)
- Vehicle-specific harware kit (2x locking plates, 2x M10 screws, 4x M8 round screws and 2x grommets)
- Hose set (6m red pipe and 6m black pipe)
- Compressor +
- Dashboard panel
- Reference and lot number stickers
- Pressure range stickers
- Cable ties x 20
- Mounting instructions
Specification
Dimensions
Distance between fixing hole centres: 135mm
Brand
Top-Drive
Height Description
75mm minimum, 245mm maximum
Temperature Range
-35°C to +70°C
Diameter Description
OD: 155mm, 220mm maximum
Country of Origin
Italy
Download
td 4075519 series datasheet
Indel B medical line temperature controlled heater, featuring a 5 litre capacity and built-in isothermal containers designed for installation and use inside ambulances.
RM7 is a controlled temperature electrical resistance heater for the heating of intravenously injectable drugs.
Indel B RM7 is designed to reach and maintain a temperature of 36°C with a tolerance of +/-1.5°C. However, the digital thermostat allows you to set a different temperature in a range from 32°C to 40°C. If the set temperature varies by more than +/-1.5°C, two alarms will be set off: an acoustic alarm (buzzer) and a visual alarm (red flashing LED).
Group: Medical Heaters
Battery protection: Yes
Specification
Brand
Indel B
Voltage Description
12V & 24V DC
Model
RM7
Height Description
403.8mm (15.9")
Width
276.8mm (10.9")
Depth
241.3mm (9.5")
Weight
10.9kg (24 lb)
Colour
Black
Wattage
50W Absorption
Approvals
CE, E-Mark
Consumption
0.26 kWh/24h
Series
Medical Line
Capacity Description
5.6 Litres
Country of Origin
Italy
Indel B medical line temperature controlled fridge with built-in isothermal containers designed for installation and use inside ambulances.
FM7 TOP is a controlled temperature compressor refrigerator for the storage and transport of drugs.
The fridge is designed to reach and maintain a temperature of 4°C with a tolerance of +/-1.5°C. The thermostat allows you to set a specific temperature in a range from 2°C to 8°C. If the set temperature varies by more than +/-1.5°C, two alarms will be activated: an acoustic alarm (buzzer) and a visual alarm (red flashing LED). Both alarms will remain active until voluntarily reset by the health operator or through the procedure indicated in the guide.
The refrigeration unit is remotely-controllable for maximum installation flexibility.
Group: Medical Refrigerators
Refrigerant gas: R134a
Battery protection: Yes
Specification
Brand
Indel B
Voltage Description
12V & 24V DC
Model
FM7 Top
Rating
SN-T Climate class
Height Description
530.8mm (20.9")
Width
276.8mm (10.9")
Depth
241.3mm (9.5")
Weight
10.9kg (24 lb)
Colour
Black
Fridge Capacity
5.6 Litres
Wattage
56W to 67W Absorption
Approvals
CE, E-Mark
Consumption
0.26 kWh/24h
Series
Medical Line
Capacity Description
5.6 Litres
Country of Origin
Italy
Indel B medical line temperature controlled fridge with built-in isothermal containers designed for installation and use inside ambulances.
FM7 BACK is a controlled temperature compressor refrigerator for the storage and transport of drugs.
The fridge is designed to reach and maintain a temperature of 4°C with a tolerance of +/-1.5°C. The thermostat allows you to set a specific temperature in a range from 2°C to 8°C. If the set temperature varies by more than +/-1.5°C, two alarms will be activated: an acoustic alarm (buzzer) and a visual alarm (red flashing LED). Both alarms will remain active until voluntarily reset by the health operator or through the procedure indicated in the guide.
This model differs from FM7 TOP for the compressor at the rear. The compressor, however, can be moved to allow for more flexible installation.
Group: Medical Refrigerators
Refrigerant gas: R134a
Battery protection: Yes
Specification
Brand
Indel B
Voltage Description
12V & 24V DC
Model
FM7 Back
Rating
SN-T Climate class
Height Description
403.8mm (15.9")
Width
276.8mm (10.9")
Depth
241.3mm (9.5")
Weight
10.9kg (24 lb)
Colour
Black
Fridge Capacity
5.6 Litres
Wattage
56W to 67W Absorption
Approvals
CE, E-Mark
Consumption
0.26 kWh/24h
Series
Medical Line
Capacity Description
5.6 Litres
Country of Origin
Italy
When it comes to ensuring your caravan or motorhome is in top condition, you need a reliable sealant that will protect it from the elements and prevent any leaks. That's where Sikaflex 522 comes in. This sealant is specifically designed for use on caravans and motorhomes, providing a secure and long-lasting bond that will keep your vehicle safe and dry.
One of the key features of Sikaflex 522 is its excellent UV resistance, meaning it won't break down or degrade when exposed to sunlight, ensuring a durable seal that will stand the test of time. Plus, its flexible nature allows for movement without compromising the bond, making it perfect for use on vehicles that are constantly on the move.
Key Features:
Specifically designed for caravans and motorhomes
color for a seamless finish
Excellent UV resistance for long-lasting durability
Flexible formula allows for movement without compromising the bond
Easy to apply and quick drying for convenience
Don't take any chances when it comes to protecting your caravan or motorhome. Invest in Sikaflex 522 today and rest easy knowing your vehicle is sealed with the best.
Mounting kit for Fiamma awnings on Renault Master (2010+). Includes 12cm, 44cm, and 64cm brackets. Genuine Fiamma adapter – durable and easy to install.
Upgrade your Renault Master camper van with the Fiamma 98655-881 Mounting Adapter Bracket Kit, tailor-made for models from 2010 onwards. This set includes three high-quality brackets (12 cm, 44 cm, and 64 cm) to provide a secure and reliable mounting solution for your Fiamma awning.
Whether you're outfitting your vehicle for full-time travel or seasonal adventures, this bracket kit ensures your awning is safely supported for use on the road or at the campsite.
Compatible with:✔️ Renault Master 2010+), Opel Movano, or Nissan NV400 H2 van with the,✔️ Fiamma F45S, F80S, and similar awnings
Kit Contents:
1x 12 cm mounting bracket
1x 44 cm mounting bracket
1x 64 cm mounting bracket
Engineered by Fiamma – the trusted name in caravan and motorhome accessories – this kit is built for strength, longevity, and a seamless fit to your vehicle.
