Newest Products

This Sunshine Solar Controller features the latest MPPT charge regulation for reliable and economical battery charge control along with a Bluetooth Adapter for setting and monitoring your solar power system. MPPT Solar controllers (Maximum Power Point Tracking) can intelligently regulate the working voltage of solar panels, letting the solar panels always work at Maximum Power Point of V-A curve. Compared with ordinary solar controller, this MPPT controller can increase the efficiency of PV modules by 10% to 30%. This Solar Charge Controller comes with a Bluetooth Adapter that allows basic reprogramming such as battery type selection along with full monitoring of the solar panel power and state of charge of your battery bank via an iOS / android app or desktop computer. The app also allows control over the load very useful for setting timers for lighting applications.  This series of controllers can effectively prolong the lifecycle of batteries, significantly improve the system performance and gives all-round electronic protection, including overcharging and over-discharge protection to minimise damage to system components caused by incorrect installation or system failure, this effectively ensures a safer and more reliable solar power system. Solar Controller Features Product Codes: TRIRON4210N and BLE-RJ45-D MPPT function Bluetooth (with included adapter) Compatible with lead acid & lithium-ion batteries 5VDC dual USB outputs Built in display Optional 2m wired remote display Microprocessor controller pulse width modulation (PWM) charging Overload protection Overcharge protection Short circuit protection Lightning protection Reverse discharge protection Reverse polarity connection protection Under voltage protection Rated battery voltage 12/24vdc RJ45 communication port for optional remote meter   Solar Controller Specifications Max Rated Charging Current: 40 amps Max Rated Load Current: 40 amps Rated Solar Charge Power: 520 Watts @ 12V - 1040 Watts @ 24V Max. PV Array Power: 780W / 12V - 1560W/24V Max Input Voltage: 100Vdc MPPT Efficiency: 99.5% Self Consumption: ≤14mA/12V - ≤15mA/12V System Voltage: 12V/24V Auto-set Working Temperature: -35° to +55° Battery Selection: Gel, Sealed, Flooded, Lithium-ion Enclosure: IP30 Temperature Compensation: -30mV/°C/12V @ 25°C Control Mode: MPPT Charging Max PV Wire Size: 6mm² Dimensions: 183mm x 256.8mm x 66.7mm Weight: 2.06kg  Doc1 Doc2

Read more less

This Sunshine Solar Controller features the latest MPPT charge regulation for reliable and economical battery charge control along with a Bluetooth Adapter for setting and monitoring your solar power system. MPPT Solar controllers (Maximum Power Point Tracking) can intelligently regulate the working voltage of solar panels, letting the solar panels always work at Maximum Power Point of V-A curve. Compared with ordinary solar controller, this MPPT controller can increase the efficiency of PV modules by 10% to 30%. This Solar Charge Controller comes with a Bluetooth Adapter that allows basic reprogramming such as battery type selection along with full monitoring of the solar panel power and state of charge of your battery bank via an iOS / android app or desktop computer. The app also allows control over the load very useful for setting timers for lighting applications.  This series of controllers can effectively prolong the lifecycle of batteries, significantly improve the system performance and gives all-round electronic protection, including overcharging and over-discharge protection to minimise damage to system components caused by incorrect installation or system failure, this effectively ensures a safer and more reliable solar power system. Solar Controller Features Product Codes: TRIRON2210N and BLE-RJ45-D MPPT function Bluetooth (with included adapter) Compatible with lead acid & lithium-ion batteries 5VDC dual USB outputs Built in display Optional 2m wired remote display Microprocessor controller pulse width modulation (PWM) charging Overload protection Overcharge protection Short circuit protection Lightning protection Reverse discharge protection Reverse polarity connection protection Under voltage protection Rated battery voltage 12/24vdc RJ45 communication port for optional remote meter   Solar Controller Specifications Max Rated Charging Current: 20 amps Max Rated Load Current: 20 amps Rated Solar Charge Power: 260 Watts @ 12V - 520 Watts @ 24V Max. PV Array Power: 780W / 12V - 1560W/24V Max Input Voltage: 100Vdc MPPT Efficiency: 99.5% Self Consumption: ≤14mA/12V - ≤15mA/12V System Voltage: 12V/24V Auto-set Working Temperature: -35° to +55° Battery Selection: Gel, Sealed, Flooded, Lithium-ion Enclosure: IP30 Temperature Compensation: -30mV/°C/12V @ 25°C Control Mode: MPPT Charging Max PV Wire Size: 6mm² Dimensions: 150mm x 216mm x 56.7mm Weight: 0.92kg  Please download the links below for more info Doc1 Doc2

Read more less

The GoMate is a negative-ground, flush mount solar charge controller, designed for an aesthetically clean and integrated look on Caravan, Boats & Motorhomes. The GoMate adopts a highly efficient PWM charging mode and is equipped with a special LCD to show the real-time operating status of the system.   *Earn Double Reward Points on all Often Purchased Together items* The GoMate is a negative-ground, flush mount solar charge controller, designed for an aesthetically clean and integrated look on Caravan, Boats & Motorhomes. The GoMate adopts a highly efficient PWM charging mode and is equipped with a special LCD display to show the real-time operating status of the system.This charge controller is fully automatic and provides simple usage patterns to users.  Features Flush mounted and embedded installation design High quality and low failure rate components (ST/IR) to ensure the product lifetime 3-Stage intelligent PWM charging: Bulk, Boost/Equalize and Float  Battery type: Sealed, Gel, Flooded, and User  Real-time energy statistics feature  Battery temperature compensation feature   Digital LCD monitor for informative display of operational parameters and fault messages  Voltage drop and temperature compensation sampling interface design  RS485 communication port with Modbus protocol, and short circuit protection for 5V/200mA power supply  Multiple communication peripherals  Rated charging current at working temperature without de-rating  Extensive electronic protections  Monitor and set the parameters via PC software or APP Mechanical Parameters  Dimension: (L×W×H) 178.5×105.5×48.3mm  Mounting dimension: 166.5×93.5mm  Mounting hole size: Φ5mm  Terminal: 16mm2 /6AWG  Recommended cable: 10mm2 /8AWG  Net Weight: 0.31kg Doc1

Read more less

DuoRacer MPPT charge controller is made for charging two batteries at the same time in a solar system. This controller supports multiple battery types, including Sealed, Gel, Flooded, LiFePO4, and Li-NiCoMn. The device recognizes the start battery system voltage automatically, and trickle charges the battery when the required. MPPT Solar controllers (Maximum Power Point Tracking) can intelligently regulate the working voltage of solar panels, letting the solar panels always work at Maximum Power Point of V-A curve. Compared with ordinary solar controller, this MPPT controller can increase the efficiency of PV modules by 10% to 30%. The Dual Battery MPPT Solar Charge Controller adopts the advanced MPPT control algorithm, which will minimize the maximum power point loss rate and loss time, also fast track the maximum power point (MPP) of the PV array, and obtain the maximum energy from solar array under any conditions. The energy utilization in the MPPT solar system is increased by 20-30% compared with PWM charging method. The controller features a low-power mode, which reduces standby current when the unit is idle preventing power waste and helping to enhance the products life. The system parameters are shown and set by LED/LCD or the MT11 remote meter (Accessory).  Monitoring of the system can be made easy with the optional remote meter or via Apple & Android smartphones, tablets, macbooks and other devices, using the optional Bluetooth Adapter. Description The Dual Battery MPPT Solar Charge Controller adopts the advanced MPPT control algorithm, which will minimize the maximum power point loss rate and loss time, also fast track the maximum power point (MPP) of the PV array, and obtain the maximum energy from solar array under any conditions. The energy utilization in the MPPT solar system is increased by 20-30% compared with PWM charging method. The controller features a low-power mode, which reduces standby current when the unit is idle preventing power waste and helping to enhance the products life. The system parameters are shown and set by LED/LCD or the MT11 remote meter (Accessory).  Monitoring of the system can be made easy with the optional remote meter or via Apple & Android smartphones, tablets, macbooks and other devices, using the optional Bluetooth Adapter. Features  Maximum Power Point Tracking technology with ultra-fast tracking speed and the tracking efficiency is no less than 99.5% guaranteed  Bluetooth (Bluetooth Adapter required) Advanced MPPT control algorithm to minimize the MPP lost rate and lost time  The wider range of the MPP operation voltage to improve the PV module utilization  Auto control function of charging power & charging current limitation (BATT1)  High quality and low failure rate components of ST, TI and Infineon to ensure the product life.  Digital circuit control of adaptive three-stage charging mode to enhance BATT1 life.  BATT1 type can be set via LED/LCD.  Product runs into the low-power mode when there is no manual operation for a long time, and charging conditions are not satisfied (PV<5V).  100% charging and discharging in operation environmental temperature range.  LED and LCD display units selectable.  Standard Modbus protocol, and RS485 (5V/200mA) communication port for the customer to expand the application area.  ① Life battery (BATT1) is the energy storage battery for powering the household loads in the off-grid system, which supports Sealed, Gel, Flooded, LiFePO4, and Li-NiCoMn batteries (the controller can NOT recognize the system voltage automatically).  ② Start battery (BATT2) is the energy storage battery which usually built in the vehicle for powering the system such as RV and Boat, and only supports lead-acid battery (the controller will recognize the system voltage automatically).  NOTE: the BATT1 and BATT2 must be at the same voltage level. Specifications Max Rated Charging Current: 30 amps Rated Solar Charge Power: 390 Watts @ 12V - 780 Watts @ 24V Max Input Voltage: 100V(At min. operating environment temp.) 92V(At 25℃ environment temp.) Max. conversion efficiency: 98% Self Consumption: 26mA/12V;15mA/24V 19mA/12V;10mA/24V(Low-power mode) System Voltage: 12V/24V Auto-set Battery Selection: Sealed, Gel, Flooded, LiFePO4, and Li-NiCoMn Enclosure: IP33 Max PV Wire Size: 10mm² Dimensions: 247.2 × 165 × 68.5 mm Doc1

Read more less

DuoRacer MPPT charge controller is made for charging two batteries at the same time in a solar system. This controller supports multiple battery types, including Sealed, Gel, Flooded, LiFePO4, and Li-NiCoMn. The device recognizes the start battery system voltage automatically, and trickle charges the battery when the required. MPPT Solar controllers (Maximum Power Point Tracking) can intelligently regulate the working voltage of solar panels, letting the solar panels always work at Maximum Power Point of V-A curve. Compared with ordinary solar controller, this MPPT controller can increase the efficiency of PV modules by 10% to 30%. The Dual Battery MPPT Solar Charge Controller adopts the advanced MPPT control algorithm, which will minimize the maximum power point loss rate and loss time, also fast track the maximum power point (MPP) of the PV array, and obtain the maximum energy from solar array under any conditions. The energy utilization in the MPPT solar system is increased by 20-30% compared with PWM charging method. The controller features a low-power mode, which reduces standby current when the unit is idle preventing power waste and helping to enhance the products life. The system parameters are shown and set by LED/LCD or the MT11 remote meter (Accessory).  Monitoring of the system can be made easy with the optional remote meter or via Apple & Android smartphones, tablets, macbooks and other devices, using the optional Bluetooth Adapter. Features  The Dual Battery MPPT Solar Charge Controller adopts the advanced MPPT control algorithm, which will minimize the maximum power point loss rate and loss time, also fast track the maximum power point (MPP) of the PV array, and obtain the maximum energy from solar array under any conditions. The energy utilization in the MPPT solar system is increased by 20-30% compared with PWM charging method. The controller features a low-power mode, which reduces standby current when the unit is idle preventing power waste and helping to enhance the products life. The system parameters are shown and set by LED/LCD or the MT11 remote meter (Accessory).  Monitoring of the system can be made easy with the optional remote meter or via Apple & Android smartphones, tablets, macbooks and other devices, using the optional Bluetooth Adapter. Features  Maximum Power Point Tracking technology with ultra-fast tracking speed and the tracking efficiency is no less than 99.5% guaranteed  Bluetooth (Bluetooth Adapter required) Advanced MPPT control algorithm to minimize the MPP lost rate and lost time  The wider range of the MPP operation voltage to improve the PV module utilization  Auto control function of charging power & charging current limitation (BATT1)  High quality and low failure rate components of ST, TI and Infineon to ensure the product life.  Digital circuit control of adaptive three-stage charging mode to enhance BATT1 life.  BATT1 type can be set via LED/LCD.  Product runs into the low-power mode when there is no manual operation for a long time, and charging conditions are not satisfied (PV<5V).  100% charging and discharging in operation environmental temperature range.  LED and LCD display units selectable.  Standard Modbus protocol, and RS485 (5V/200mA) communication port for the customer to expand the application area.  ① Life battery (BATT1) is the energy storage battery for powering the household loads in the off-grid system, which supports Sealed, Gel, Flooded, LiFePO4, and Li-NiCoMn batteries (the controller can NOT recognize the system voltage automatically).  ② Start battery (BATT2) is the energy storage battery which usually built in the vehicle for powering the system such as RV and Boat, and only supports lead-acid battery (the controller will recognize the system voltage automatically).  NOTE: the BATT1 and BATT2 must be at the same voltage level. Specifications Max Rated Charging Current: 20 amps Max Rated Load Current: 20 amps Rated Solar Charge Power: 260 Watts @ 12V - 520 Watts @ 24V Max Input Voltage: 100V (at min. operating environment temp) 46V (At 25℃ environment temp.) Max. conversion efficiency: 97.5% Self Consumption: 12mA/12V;8mA/24V - 4mA/12V;3mA/24V (Low-power mode) System Voltage: 12V/24V Auto-set Battery Selection: Sealed, Gel, Flooded, LiFePO4, and Li-NiCoMn Enclosure: IP33 Max PV Wire Size: 4mm² Dimensions: 243.7 × 158 × 63 mm Doc1

Read more less

Fresh design, superior energy efficiency: this smart compressor-cooled refrigerator provides 113 l of cool storage. Its elegant frameless door, incorporating a dark silver front panel and a convenient full-width handle, opens to a versatile interior. You can easily remove the 8.2 l freezer compartment to use the full cabinet capacity for refrigeration or deep-freezing. General Features 3-in-1 cooling solution: fridge, freezer, or both at the same time! Energy-efficient high-end compressor with 3 operating modes (Eco/Boost/Silent) Frameless door with dark silver front panel and full-width handle Beveled rear side for maximal utilization of space on board Reversible door hinge - can be fitted left or right as required Dual-function locks can also act as vents for your fridge Standard or flush-mount installation frame available as an accessory Specifications Sku: 9620001484 Model: NRX0035C Model In Label: NRX0035 Scope Of Delivery: 1 refrigerator, 1 drain elbow, 1 SOM manual, 1 INM manual Product Description: Compressor-cooled refrigerator, 32 l, dark silver front Refrigeration Technology: Compressor Dimensions Product Depth:480 Product Height: 525 Product Width: 380 Net Weight:16 Total Volume: (IEC62552-3),(I) Frozen Vol: EN62552 (I) Electrical Input Voltage (DC),(V) Rated Input Power (DC) Performance Refrigerant Type: R134a GWP: 1430 Refrigerant Amount: 24 CO2 Equivalent: 0.034 Energy Consumption climate Class: (EN2552) T Documentation & Downloads Dometic NRX0035-0130, NRX1035-1130 - Installation Manual INT(zxx) Dometic NRX - Short Operating Manual EMEA18 Dometic NRX - Operating Manual EMEA18

Read more less

DuoRacer MPPT charge controller is made for charging two batteries at the same time in a solar system. This controller supports multiple battery types, including Sealed, Gel, Flooded, LiFePO4, and Li-NiCoMn. The device recognizes the start battery system voltage automatically, and trickle charges the battery when the required. MPPT Solar controllers (Maximum Power Point Tracking) can intelligently regulate the working voltage of solar panels, letting the solar panels always work at Maximum Power Point of V-A curve. Compared with ordinary solar controller, this MPPT controller can increase the efficiency of PV modules by 10% to 30%. The Dual Battery MPPT Solar Charge Controller adopts the advanced MPPT control algorithm, which will minimize the maximum power point loss rate and loss time, also fast track the maximum power point (MPP) of the PV array, and obtain the maximum energy from solar array under any conditions. The energy utilization in the MPPT solar system is increased by 20-30% compared with PWM charging method. The controller features a low-power mode, which reduces standby current when the unit is idle preventing power waste and helping to enhance the products life. The system parameters are shown and set by LED/LCD or the MT11 remote meter (Accessory).  Monitoring of the system can be made easy with the optional remote meter or via Apple & Android smartphones, tablets, macbooks and other devices, using the optional Bluetooth Adapter. Features  Maximum Power Point Tracking technology with ultra-fast tracking speed and the tracking efficiency is no less than 99.5% guaranteed  Bluetooth (Bluetooth Adapter required) Advanced MPPT control algorithm to minimize the MPP lost rate and lost time  The wider range of the MPP operation voltage to improve the PV module utilization  Auto control function of charging power & charging current limitation (BATT1)  High quality and low failure rate components of ST, TI and Infineon to ensure the product life.  Digital circuit control of adaptive three-stage charging mode to enhance BATT1 life.  BATT1 type can be set via LED/LCD.  Product runs into the low-power mode when there is no manual operation for a long time, and charging conditions are not satisfied (PV<5V).  100% charging and discharging in operation environmental temperature range.  LED and LCD display units selectable.  Standard Modbus protocol, and RS485 (5V/200mA) communication port for the customer to expand the application area.  ① Life battery (BATT1) is the energy storage battery for powering the household loads in the off-grid system, which supports Sealed, Gel, Flooded, LiFePO4, and Li-NiCoMn batteries (the controller can NOT recognize the system voltage automatically).  ② Start battery (BATT2) is the energy storage battery which usually built in the vehicle for powering the system such as RV and Boat, and only supports lead-acid battery (the controller will recognize the system voltage automatically).  NOTE: the BATT1 and BATT2 must be at the same voltage level. Specifications Max Rated Charging Current: 10 amps Max Rated Load Current: 10 amps Rated Solar Charge Power: 130 Watts @ 12V - 260 Watts @ 24V Max Input Voltage: 60V (at min. operating environment temp) 46V (At 25℃ environment temp.) Max. conversion efficiency: 97.4% Self Consumption: 12mA/12V;8mA/24V - 4mA/12V;3mA/24V (Low-power mode) System Voltage: 12V/24V Auto-set Battery Selection: Sealed, Gel, Flooded, LiFePO4, and Li-NiCoMn Enclosure: IP33 Max PV Wire Size: 4mm² Dimensions: 227.2 × 143 × 58.1 mm Weight: 0.8kg  Please Download the link below for more info Doc1

Read more less

TRACER3210AN - The Tracer-AN(10A~40A) series charge controller adopts MPPT(Maximum Power Point Tracking) technology. In any situation, it can track the maximum power point (MPP) of the solar array and obtain the maximum solar energy rapidly and accurately. It can generate up to 30% more power compared to PWM charge controllers. This series can accept max.100V Voc and work with the solar panels which are designed for on-grid applications. Settings and system status are accessible through the multifunction LCD display. Description Features of the - 30A-100V MPPT Charge Controller - Tracer Series MPPT tracking efficiency above 99.5%  Maximum charge conversion efficiency as high as 98%  Support lead-acid and lithium-ion batteries  Multiple load work modes  Charging power and current limitation function  High-temperature charging power derating function  Standard Modbus communication protocol with RS485 interface  Real-time energy statistics function Specifications Nominal System Voltage: 12/24VDC/Auto Battery Input Voltage Range: 8V～32V Battery Type: Lead-Acid (Sealed/Gel/Flooded) Lithium (LiFePO4 (NiCoMn) O2)/User Max Rated Charging Current: 30 amps Max Rated Charge Power: 390W/12V - 780W/24V  Max PV Input Voltage: 100Vdc Max. conversion efficiency: 98.6% Tracking efficiency: 99.5%  Self Consumption: 12mA Grounding: Common negative grounding Ambient temperature range: -25℃～+60℃ (Derate above 45℃) Enclosure: IP20 Dimensions: 228 × 164 × 55 mm Weight: 1.26kg Please Download the link below for more info Doc1

Read more less

ABS Waterproof IP66 - Cable Entry Cover  Please download the link below for the installation guide Doc1

Read more less

Sunshine Solar panel mounts are an ideal way to fix your solar panels on the roof or deck of caravans, motor homes and boats. This set of 6 ABS solar mounts can be safely bonded to the surface removing the need to drill holes. This set of four universal solar panel corner mounts can be used with any aluminium framed solar panel and have a lateral length of 150mm. The mounts act as a wind deflector and maintain the correct air gap between the solar panel and the roof top / deck. The plastic mounts profiles provide a high quality mounting solution creating the ideal combination of functionality and appearance.  Important note:  When calculating the space required to fit a solar panel with these plastic mounts you will need to add 120mm to both the width and length of the solar panel dimensions. Example: Solar Panel dimensions = 1000mm x 500mm - minimum flat area needed = 1120mm x 620mm. Available in Black or White Contents: Sunshine 4 Plastic Corner Mounts Sunshine 2 Plastic Side Mounts ABS Waterproof Cable Entry Cover Please download the link below for the installation guide Doc1

Read more less

Sunshine Solar panel mounts are an ideal way to fix your solar panels on the roof or deck of caravans, motor homes and boats. This set of 6 ABS solar mounts can be safely bonded to the surface removing the need to drill holes. This set of four universal solar panel corner mounts can be used with any aluminium framed solar panel and have a lateral length of 150mm. The mounts act as a wind deflector and maintain the correct air gap between the solar panel and the roof top / deck. The plastic mounts profiles provide a high quality mounting solution creating the ideal combination of functionality and appearance.  Important note:  When calculating the space required to fit a solar panel with these plastic mounts you will need to add 120mm to both the width and length of the solar panel dimensions. Example: Solar Panel dimensions = 1000mm x 500mm - minimum flat area needed = 1120mm x 620mm. Contents: Sunshine 4 Plastic Corner Mounts Abs Waterproof Cable Entry Cover  Please download the link below for the installation guide Doc1

Read more less