Best Selling Products

A blank plate for fitting to the number plate holder of the bike carrier. Features: To be used in countries where it is not allowed to remove the real plates from the car. Write on it by hand or use stickers. Technical Specifications: Model Number   976200

Read more less

For locking the Thule HangOn 972/974/9708, Thule RideOn 9502/9503 or Thule EasyBase 949 bike carriers to the tow bar. Technical  Specifications: Model Number  - 957000   Warranty Thule is dedicated to providing exceptional products that are quality tested and guaranteed against defects in materials and workmanship.

Read more less

 Upright bike rack for the quickest, most convenient mounting – for bikes up to 20 kg. Product features Automatically positions your bike when you secure it, thanks to the uniquely designed frame holder and wheel tray Pressure is spread via large, soft claw pads that adapt to your bike’s frame tubes – minimizing the risk of frame damage Quick and easy bike securing – the torque limiter dial controls the force going into the bike frame with a clear sign of correct mounting Safe mounting – your bike is prevented from falling thanks to the claw’s extended lower jaw Stable wheels – firmly fixed in smartly designed wheel holders with diagonal quick-release wheel straps Easy, tool-free interface for switching the bike rack from one side of your car to the other Pre-assembled, no tools required Locks the bike to the bike rack and the bike rack to the roof racks (locks included) Technical Specifications Load capacity 20 kg Dimensions 145 x 32 x 8.5 cm Weight 4.2 kg Fits round frame dimensions 22-80 mm Fits maximum oval frame dimensions 80x100 mm Thru-axle compatible  ✓  Carbon frame compatible  ✓  Adapter/s required: Thule Carbon Frame Protector Fits roof racks with 20x20 mm T-tracks  ✓  Fits roof racks with 24x30 mm T-tracks  ✓  Adapter/s required: Thule T-track Adapter 889-1 Fits Thule WingBar Evo  ✓  Fits Thule WingBar  ✓  Fits Thule ProBar  ✓  Fits Thule SquareBar  ✓  Adapter/s required: Thule ProRide SquareBar Adapter Fits Thule SlideBar  ✓  One Key System compatible  ✓  Model number 598002

Read more less

Thatcham alarm immobiliser Sigma S30, Category 1 system PLEASE NOTE THE BELOW: As a insurance requirement a registered Scorpion installer/Dealer has to do the installation upon purchase details will be sent to a local installer/dealer in your area. Installation cost is dependent on vehicle, please enquire Providing perimeter and ultrasonic interior protection.  Thatcham Category 1 alarm/immobiliser system, providing perimeter and ultrasonic interior protection Supplied with 2 x single button radio keys, self powered siren, keypad and tri-coloured status LED The system has full, in-built, CDL control to power/switch a vehicle’s CDL system Dual immobilisation circuits Key theft protection facility Auxiliary siren, armed accessory, total closure, interior lamp illumination, headlamp illumination, 2-stage unlock and boot release or remote engine start/stop outputs (separate module required) Sophisticated programming and diagnostic facility via either the keypad or a CP3 workshop programmer Security Features 2 x single button radio keys (programmable, water and shock resistant with random 66-bit encryption to prevent scanning and code grabbing. Lost or stolen radio keys can be programmed out) Perimeter protection circuit for boot and bonnet (negative input) Perimeter protection circuit for doors (positive or negative input) Closed loop protection circuit (looped wire to protect accessories, trailers, bike racks etc) Ignition detection circuit Ultrasonic interior protection (base sensitivity adjustable, length of disturbance adjustable, and automatically adjusts if any movement is detected during the threshold time) 2 x circuit, passively setting, immobilisation (18 amp continuous/30 amp max) Manual arm, using the radio key (or programmable auto arm, which automatically arms the system 60 seconds after the last door is shut – adjustable between 1 and 99 seconds. Auto arm can also be programmed to lock the vehicle if required) Auto re-arm can be programmed to re-arm the system if a door is not opened within 60 seconds of disarming the system -adjustable between 1 and 99 seconds. Auto re-arm also re-locks the vehicle A key theft protection feature can be turned on to prevent the radio keys automatically de-activating the immobilisation when the alarm system is disarmed. In this mode the system’s PIN must also be entered into the keypad before the vehicle can be started. This prevents theft of a vehicle even with the owner’s keys Last trigger identification via the dashboard LED and a record of the elapsed time since the last trigger, can be recalled using the keypad or a CP3 workshop programmer The total trigger count memory for each individual circuit since the was system installed or the memory re-set is also stored in the system’s memory Additional plug in single stage sensor socket (see optional accessories) Additional plug in dual stage sensor socket and siren pre-warn facility (see optional accessories) Secure data linked, self powered siren included Convenience Features Full central door locking/unlocking control (with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period) Armed output (negative 200mA max ) Additional siren/pager output (negative 200mA max) Total closure output (via holding down the radio key when arming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period – negative 200mA max Total open/boot release output (via holding down the radio key when disarming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period – negative 200mA max) Interior lamp illumination output (negative 200mA max) Headlamp illumination output (negative 200mA max) Secure ignition PIN override Secure PIN override using the keypad Silent arm and disarm (audible bleeps can be programmed back on, however this will breach current legislation) The last circuit to trigger can be excluded using the keypad The vehicle’s battery voltage can be checked using the keypad The sensors are excludable using the keypad, ignition or remotely with the optional two button radio key) Personal Safety Features Auto lock can be programmed to lock the vehicle at the start of a journey when the ignition is turned on, and then unlock when the ignition is turned off. This can be excluded on individual occasions Two stage unlock can be configured to only unlock the driver’s door when the system is disarmed, the remaining doors are only unlocked if the radio key is pressed a second time Panic feature switched using the radio key or an optional internal button

Read more less

Installation of the hardwiring cable to your vehicle’s fuse panel enables the built-in Parking Surveillance Mode in your THINKWARE Dash Cam, while you are away from your vehicle. All Thinkware Dashcams can then monitor your vehicles Battery and will shut down if it detects it getting low. Compatible with ALL THINKWARE Dash Cam models except for the M1 Motorsport Cam or F790 Dash Cam Enables parking surveillance mode Wires into permanent Live, Ignition live and earth Fused permanent Live and Ignition live 12V and 24V compatible Supplied with 3 metre long cable Suits all THINKWARE dash cams (excluding M1 & F790 models) We highly recommend having a professional install your dash cam power.

Read more less

Rechargeable flooded lead acid battery. Measurements Width 173mm x Length 260mm x Height 225mm Approx Weight 20.7 kg Other Specifications Voltage: 12 Ah: 70 Measurements Width 173mm x Length 260mm x Height 225mm Approx Weight 20.7 kg Other Specifications Voltage: 12 Ah: 70 Terminal Layout Fitments Ideal for electric fence use. Look at our Solar Range for ways of charging your battery.

Read more less

Thetford Bowl Cleaner 30911YZ is a fast-acting and effective spray, specially designed for all separation toilets. • Ideal for daily cleaning of dirt and urine scale without using water, ensuring perfect hygiene • Responsible choice: Nature-based formula with natural lactic acid • Fresh Ocean Breeze scent • 500ml • No PCR bottle yet, but due to label material, the empty rinsed bottle can be recycled Pairs perfectly with Thetford's Separation Toilet – Urine Tank Fresh TF-30910YZ and Drying Agent TF-212491 to ensure a thoroughly clean toilet experience wherever you go. Key Features Ideal for daily cleaning of dirt & urine scale, ensuring perfect hygiene Responsible choice: Nature-based formula with natural lactic acid Fresh Ocean Breeze scent 500ml Empty, rinsed bottle can be recycled Specifications Unit of Sale 500ml Brand Thetford Size 500ml Application All seperation toilets Country of Origin Netherlands

Read more less

Transform your motorhome with expert installation of your MEMO scooter rack system. Our certified technicians provide complete professional installation at our workshop, ensuring your equipment is fitted safely, securely, and in compliance with all manufacturer specifications. \ What's Included: •Complete professional installation of your MEMO scooter rack •Vehicle-specific chassis assessment and preparation •Proper electrical connections and lighting system setup •Safety testing and quality assurance checks •Installation certificate and documentation •12-month installation warranty Why Choose Professional Installation: •Safety Assured: Our certified technicians ensure your installation meets all safety standards and manufacturer requirements •Warranty Protection: Professional installation maintains your product warranty and provides additional installation coverage •Expert Knowledge: Years of experience with MEMO products and motorhome chassis systems •Specialized Equipment: Access to professional tools and workshop facilities for optimal installation •Time Saving: Efficient installation by experienced professionals •Peace of Mind: Comprehensive testing ensures everything works perfectly before you leave Our Installation Process: 1.Pre-Installation Assessment: Detailed inspection of your motorhome chassis and compatibility check 2.Professional Fitting: Expert installation using specialized tools and techniques 3.Electrical Integration: Proper wiring and lighting system connection 4.Safety Testing: Comprehensive testing of all functions and load capacity 5.Documentation: Installation certificate and maintenance guidance provided Important Notes: •Installation requires advance booking - please contact our team to schedule •Vehicle must be brought to our workshop facility •Installation typically takes 4-6 hours depending on vehicle complexity •Please ensure you have purchased your MEMO scooter rack before booking installation Contact our expert team today to book your professional installation service and ensure your MEMO scooter rack is fitted to the highest standards.

Read more less

The 17cm Standard Spout for Comet Taps is a genuine replacement part made for Comet taps. Strong and reliable, it gives smooth water flow and is simple to replace if your old spout is worn or damaged. With a 17cm length, this spout is the right size for daily use in caravans, motorhomes, boats, and kitchens. Easy to install, it helps restore your tap to full working order quickly. Key Features: 17cm standard spout for Comet taps Genuine replacement part Strong and durable design Smooth and steady water flow Quick and easy to install Great for caravans, motorhomes, boats, and kitchens Technical specifications Brand COMET Product Code PS92422000

Read more less

The CAN 3000430 Glass Lid is a genuine replacement part designed for the CAN FC1343 unit. Built from strong, heat-resistant tempered glass, this lid restores both safety and style to your appliance. Over time, glass lids can become scratched, cracked, or damaged, which affects the usability and appearance of your kitchen setup. Replacing with this authentic CAN part ensures continued reliable performance and a clean, factory-fresh finish. When closed, the glass lid keeps the hob safe from spills, dust, and accidental damage, while also providing a smooth, hygienic surface that doubles as additional worktop space. When open, it remains securely positioned, allowing safe access to the hob beneath. Compact, durable, and practical, this replacement lid is ideal for use in caravans, motorhomes, and boats where maximising space and safety is essential. Key Benefits: Genuine CAN spare part for FC1343 appliances Protects the hob when closed, keeping it clean and safe Provides extra usable workspace in small kitchens Durable tempered glass construction for safety and reliability Restores the original sleek look of your appliance Quick and easy to install with existing hinges Extends the service life of your FC1343 unit

Read more less

The 20–25 mm angled waste fitting for CAN sinks (CAN LP1800) is a compact 90° elbow sink waste outlet designed for use with CAN sinks and other small installations in caravans, motorhomes, campervans, boats, and compact wash stations. It fits a 1¼-inch (Ø 54–55 mm) sink waste hole and features a dual barbed outlet that accepts both 20 mm and 25 mm flexible waste hoses, making it versatile for different plumbing setups. Built with a marine-grade stainless steel grate/strainer and a durable grey plastic body, it is resistant to corrosion and wear in wet environments. Some versions include a 52 mm rubber plug with a plastic handle for sealing the sink. Measuring approximately 136 × 77 × 36 mmand weighing around 0.1 kg, this Italian-made fitting is compact, reliable, and easy to install—ideal for tight under-sink spaces where durability and space-saving design are essential.   UNIVERSAL 90DEG. ELBOW DRAIN, SUITABLE FOR ALL CAN SINKS WITH 54-55 MM WASTE HOLE MARINE GRADE STAINLESS-STEEL GRIDDLE BARBED OUTLET 20-25 MM 52 MM RUBBER PLUG WITH PLASTIC HANDLE      

Read more less