Truma VK2 10mm 2-way gas manifold valve with brass olives and nuts.
Thread Connection
Metric
Thread Fitting Size
M10
Thread Gender
Male
Thread Size
10mm Male Metric
Brand
Truma
Type
Gas Valves
Material
Brass
Primary Construction
Brass
Country of Origin
Italy
Pure sine wave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds.
Description
Features of the - Victron Energy Phoenix Inverter 24V 3000VA VE.Bus
SinusMax – Superior engineering
Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load.
Extra start-up power
A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances.
Virtually unlimited power thanks to parallel and 3-phase operation capability
Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible.
To transfer the load to another AC source: the automatic transfer switch
If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds).
Computer interface
All models have a RS-485 port. All you need to connect to your PC is our MK3-USB VE.Bus to USB interface (see under accessories). Together with our VEConfigure software, which can be downloaded free of charge from our website, all parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to VE Net, the new power control network of Victron Energy, or to other computerized monitoring and control systems.
Pdf
The Victron MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure.
Description
The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.
Features of the - Victron MultiPlus 48V 3000VA 35-16A - 230V
Two AC OutputsThe main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).
Virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity.
Three phase capability
In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.
PowerControl – Dealing with limited generator, shore side or grid power
The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.
PowerAssist – Boosting the capacity of shore or generator power
This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.
Solar energy: AC power available even during a grid failure
The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.
System configuring
In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.
Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.
Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).
On-site Monitoring and control
Several options are available: Battery Monitor, Multi Control Panel, Colour Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).
Remote Monitoring and control
Colour Control GX or other GX devices. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.
Remote configuring
When connected to the Ethernet, systems with a Colour Control GX or other GX device can be accessed and settings can be changed remotely.
Pdf
The Victron MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure.
Description
The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.
Features of the - Victron MultiPlus 48V 3000VA 35-16A - 230V
Two AC OutputsThe main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).
Virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity.
Three phase capability
In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.
PowerControl – Dealing with limited generator, shore side or grid power
The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.
PowerAssist – Boosting the capacity of shore or generator power
This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.
Solar energy: AC power available even during a grid failure
The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.
System configuring
In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.
Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.
Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).
On-site Monitoring and control
Several options are available: Battery Monitor, Multi Control Panel, Colour Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).
Remote Monitoring and control
Colour Control GX or other GX devices. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.
Remote configuring
When connected to the Ethernet, systems with a Colour Control GX or other GX device can be accessed and settings can be changed remotely.
Pdf
The Victron MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger and a high-speed AC transfer switch in a single compact enclosure.
Description
The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.
Features of the - Victron MultiPlus 48V 3000VA 35-16A - 230V
Two AC OutputsThe main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).
Virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity.
Three phase capability
In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.
PowerControl – Dealing with limited generator, shore side or grid power
The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.
PowerAssist – Boosting the capacity of shore or generator power
This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.
Solar energy: AC power available even during a grid failure
The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.
System configuring
In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.
Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.
Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).
On-site Monitoring and control
Several options are available: Battery Monitor, Multi Control Panel, Colour Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).
Remote Monitoring and control
Colour Control GX or other GX devices. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.
Remote configuring
When connected to the Ethernet, systems with a Colour Control GX or other GX device can be accessed and settings can be changed remotely.
Pdf
A high pressure gas hose 450mm in length, designed to connect any UK propane gas cylinder to the bulkhead fitted 30mbar gas regulator fitted to a caravan or motorhome.
This high quality hose has a POL connector one end and M20 x 1.5 nut on the other end.
This hose is used by various manufacturers of motorhomes, including Bailey, Swift, Auto Sleeper, Auto, Trail, Elddis, Fendt: Platin, Hymer, Saphir, Topas, Eifelland, Bianco, Tendenza, Brillant, Opal Hobby: De Lux, Excellent, Exclusive, Prestige, Excelsior, Landhaus, La Vita, Premium, Siesta, Joker, Optima , Knaus, Burstner, Chateau, Tabbert, Dethleffs, Adria, Diamant, LMC, TEC and Laika.
Brand
Truma
Type
Propane Pigtails
Length
450mm
Weight
1.001kg
Material
Rubber
Inlet Connection
UK POL
Outlet Connection
W20
Country of Origin
Italy
A 450mm standard gas hose from Truma, designed to connect directly onto a butane bottle. This hose has a W20 male thread that connects to the bulkhead regulators.
Brand
Truma
Type
Butane Pigtails
Length
450mm
Weight
1.001kg
Country of Origin
Italy
A 450mm rupture hose designed to be used with Truma regulators. This rupture hose is suitable for use with butane bottles and offers an additional level of protection should there be a loss of gas due to a burst hose.
Brand
Truma
Type
Gas Hoses
Length
450mm
Country of Origin
Italy
Quick and easy shade and privacy thanks to this blind system with an integrated magnetic catch that closes in the middle of the windscreen (slides from left to right). The side windows are completely pre-assembled and are simply secured to the vehicle door frames. All components of the REMIfront cab blinds fit perfectly into the interior design. The blinds do not cover the ventilation openings. Designed for the left side windows.
Please Note: this blind system is not suitable for vehicles with airbags on the A-pillar and above the doors.
Brand
Remis
Width
5.5mm
Weight
5.5kg
Application
Ford
Country of Origin
United Kingdom
BBQ quick release external gas point for motorhomes and campervans. Made of thick high quality plastic. Flap size: 145mm x 105mm. Fits 8mm copper pipe connection. Quick-release nozzle and on/off tap.
Brand
Truma
Type
Gas Points
Size
Flap size: 145mm x 105mm
Weight
1.001kg
Material
Thick high quality plastic
Colour
Black and Grey
Truma gas pressure regulator with crash sensor for one cylinder. The new generation of MonoControl CS safety gas pressure regulators is suitable for one gas cylinder. The integrated crash sensor stops the flow of gas immediately in the event of an accident. This prevents gas escaping if the gas installation is damaged. 40% less weight than the previous model. User friendly - if the crash sensor is triggered, this can be seen on the yellow button; simply press the reset button on the device. (52412-01).
Technical data:
Propane/Butane
Regulator capacity: max. 1.5 kg/h.
Regulator inlet: Male thread M20 x 1.5 (G.13)
Regulator outlet: Olive screw connection 10 or 8mm (H.9)
Crash sensor triggering value: 3.5g +/- 0.5g
Dimensions: 106 x 101 x 102mm (H x W x D)
Weight: 500g.
PLEASE NOTE: Gas appliances should only be installed by a Gas Safe registered installer and in accordance with the manufacturers' instructions.
Brand
Truma
Type
Gas Regulators
Height Description
106mm
Width
101mm
Depth
102mm (4")
Weight
500g
Flow Rate Description
1.5 kg/h
Inlet Pressure
0.3 to 16 bar
Outlet Pressure
30 mbar
Inlet Connection
M20
Outlet Connection
10mm or 8mm
Fuel
LPG
Clip-on adaptor to enable Propane cylinders with a 27mm outlet to be used with a caravan or motorhome 30mb bulk head regulator. Features an integrated 90 degree elbow. (51.4.190.0002)
PLEASE NOTE: Gas appliances should only be installed by a Gas Safe registered installer and in accordance with the manufacturers' instructions.
Brand
Truma
Type
Propane Adaptors
Outlet
27mm
This collection was generated by the Seguno app for use in email marketing and is not available on any sales channels. By default, it is configured to show your best-selling products that are in stock and not free.
