Reich submersible pump POWERJET PLUS, 25 litres/minute, with automatic vent and strainer. With UniQuick connection.
Pressure 2.1 bar
Diameter 55mm
Power consumption 75 Watt
Brand
Reich
Type
Water Pumps
Diameter Description
55mm
Consumption
Power: 75 Watt
Capacity Description
25 Litres/Minute
Working Pressure
2.1 bar
Keeps debris out of pump, transparent, easy to see when strainer needs cleaning, 50 Mesh stainless steel screen. Port Size : 1/2" Twist-on fitting, 1/2" Hosetail outlet.
Brand
SHURflo
Type
Strainers
Size
1/2" - 1/2"
The Whale Water master gives a smooth consistent flow and can run dry without causing damage. It is self-priming up to 3 metres and is suitable for 2 outlets (2gpm) or 3 to 4 outlets (3gpm). A fully sealed protective motor housing and completely integrated switch means the pump is well protected. Included in the box: 1 x Strainer,1 x Screw kit, 2 x 1/2” threaded connectors, 2 x 1/2” barbed connectors. 12 volt. Available in 2 and 3 gallons per minute versions.
Accumulator Recommended
Yes
Maximum Recommended Head
Maximum Discharge Head: 20 Metres (66 Feet)
Self Primes up to
3 Metres (9.8 Feet)
Wire Size
Minimum Wire Size: 1.5mm² (16 AWG)
Inlet Outlet
Fittings for 15mm Whale Female Quick Connect, 13mm (1/2") ID Hose & 1/2" NPT
Brand
Whale
Type
Fresh Water Pumps
Voltage Description
12V DC
Model
P2 FW0814
Height Description
125mm (4.9")
Width
179mm (7")
Length
209mm (8-1/4")
Fuse
5A
Flow Rate Description
8 LPM (2.2 US GPM)
Approvals
EMC Compliant, CE Marked
Amps Description
4A
Supplied With
Strainer
Cut Out Pressure Description
30 PSI / 2 Bar
Warranty
2 Years
Country of Origin
United Kingdom
Downloads
Information Sheet
Installation Instructions
The Fiamma Aqua F Pump is Fiamma's first self priming pump with 4 chambers giving it a greater flow of water. The inner membrane is made from a single piece to ensure a water tight sealThe Fiamma Aqua F pump is Fiamma's first self priming pump with 4 chambers giving it a greater flow of water. Equipped with innovative inner membrane made from a single piece to ensure watertight seal. With anti-vibration base, and external filter for easy maintenance. Enhanced motor with high efficiency, to ensure high capacity with low power consumption. Effective flow up to 13 l/min. The change from 3 to 4 pistons and the simultaneous increase in displacement allow the new Aqua F of up to 13 l/min flow rate.
Constant flow rate when opening the tap. The largest number of pistons, each of which assisted by one inlet valve (the outer ones in the picture) and one outlet valve (the four internal), apply a constant thrust; this translates into a continuous water flow.
Decreased to 50 dB of maximum noise level. Several factors contribute to reduce vibrations, making this pump even quieter:
• More balanced pressure
• Rubber membrane in a single piece
• Compact mechanical transmission
• Anti vibration base 12V
Brand
Fiamma
Type
Fresh Water Pumps
Voltage Description
12V DC
Cut Out Pressure Description
21.7 PSI / 1.5 Bar
An efficient 12V DC, high-flow, self-priming pump with good performance in an economical footprint. The Jabsco Xylem Par-Max 3 has a dry self-priming capability of 2.13 meters (7ft) and can run dry without damage. It is designed to serve two or more outlets.
Pump features include a plastic housing protecting the motors from corrosion, vibration-dampening feet for quiet operation and an integrated, sealed pressure switch for on-demand operation. It has a
The pressure-controlled pump is supplied with two 1/2” quick connect straight hosebarb fittings and a quick connect inline 40 mesh strainer.
• Voltage: 12V DC
• Open flow GPM (LPM): 3 (11)
• Shut-off pressure PSI (BAR): 40 (2.8)
• Max. current AMPS: 6.2
• Recommended fuse size: 10
• Port fittings: 2 x 1/2" Straight Hosebarb
• Dimensions: 9.1” in length, 4.2” in width, 4.2” in height / 231(L) x 107(W) x 107(H)mm
Replaces
JAB-31395-0392
Self Primes up to
Up to 10ft (3m) dry prime
Inlet Outlet
Fittings for 13mm (1/2") ID hose
Brand
Jabsco
Type
Fresh Water Pumps
Voltage Description
12V DC
Model
31395-4012-3A
Size
Leads: 12" (305mm), 16 AWG (1.5mm^2)
Height Description
108mm
Width
108mm
Depth
231mm
Weight
1.8kg
Fuse
10A (not included)
Temperature Range
Ambient & Fluid: 0°C to 60°C (32°F ‐ 140°F)
Flow Rate Description
11 LPM (2.9 US GPM)
Approvals
ISO 8846 Ignition Protected, C.E Certified, RCM compliant
Pressure Rating
Operating: 40 PSI (2.8 bar) maximum, Inlet: 30 PSI (2.1 bar) maximum
Amps Description
6 Amps at 40 PSI (2.8 BAR)
Supplied With
Inline Strainer (40 mesh) & Quick Connect Fittings
Cut In Pressure
35 PSI
Cut Out Pressure Description
40 PSI / 2.8 Bar
Downloads
Jabsco Par Max Series Brochure en
Technical Data Sheet Jabsco Xylem Par Max 3 31395 4012 3A
The Jabsco Xylem Par-Max HD4 12V DC freshwater delivery pump features a wide diameter motor (compared to non-HD models) with a powder-coated shell, cast aluminium endbells and lower housing to improve pressure capability and life.
The pump delivers exceptional performance and has a dry self-priming capability of 2.13 meters (7ft) and can run dry without damage. It is designed to serve four or more outlets.
Pump features include vibration-dampening feet for quiet operation and an integrated, sealed pressure switch for on-demand operation. The pump is supplied with two 1/2” quick connect straight hosebarb fittings and a quick connect inline 40 mesh strainer.
• Voltage: 12V DC
• Open flow GPM (LPM): 4 (15)
• Shut-off pressure PSI (BAR): 40 (2.8)
• Max. current AMPS: 10.0
• Recommended fuse size: 15
• Port fittings: 2 x 1/2" Straight Hosebarb
• Dimensions: 9.4” in length, 4.1” in width, 3.8” in height / 239(L) x 104(W) x 97(H)mm
Replaces
509737
Self Primes up to
Up to 8ft (2.4m) dry prime
Inlet Outlet
Fittings for 13mm (1/2") ID hose
Brand
Jabsco
Type
Fresh Water Pumps
Voltage Description
12V DC
Model
Q401J-115S-3A
Size
Leads: 12" (305mm), 14 AWG (2.5mm^2)
Height Description
97mm
Width
104mm
Depth
239mm
Weight
2.94kg
Fuse
15A (not included)
Temperature Range
Ambient & Fluid: 0°C to 60°C (32°F ‐ 140°F)
Flow Rate Description
15 LPM (4 US GPM)
Approvals
ISO 8846 Ignition Protected, C.E Certified, RCM compliant
Pressure Rating
Operating: 40 PSI (2.8 bar) maximum, Inlet: 30 PSI (2.1 bar) maximum
Amps Description
10 Amps at 40 PSI (2.8 BAR)
Supplied With
Inline Strainer (40 mesh) & Quick Connect Fittings
Cut In Pressure
35 PSI
Cut Out Pressure Description
40 PSI / 2.8 Bar
Downloads
Jabsco Par Max Series Brochure en
Technical Data Sheet Jabsco Xylem Par Max HD4 Q401J 115S 3A
OEM version of the 26500 pump - It does not include retail packaging, fittings or connectors.
Shurflo Trail King are fully automatic triple diaphragm positive displacement freshwater pumps with integral pressure switch.
• Quiet Performance
• Runs dry without damage
• Self Priming
• Built-in Check Valve
• Easy Installation
• Enclosed Motor
• Thermally Protected
Key Features
Quiet Performance
Runs dry without damage
Self Priming
Built-in Check Valve
Easy Installation
Enclosed Motor
Thermally Protected
Brand
SHURflo
Type
Fresh Water Pumps
Voltage Description
12V DC
Model
Trail King 7
Flow Rate Description
7LPM
Cut Out Pressure Description
20 PSI / 1.4 Bar
OEM version of the 26502 pump - It does not include retail packaging, fittings or connectors.
Shurflo Trail King are fully automatic triple diaphragm positive displacement freshwater pumps with integral pressure switch.
• Quiet Performance
• Runs dry without damage
• Self Priming
• Built-in Check Valve
• Easy Installation
• Enclosed Motor
• Thermally Protected
• Light duty (vehicle/motorhome) leisure use.
Key Features
Quiet Performance
Runs dry without damage
Self Priming
Built-in Check Valve
Easy Installation
Enclosed Motor
Thermally Protected
Brand
SHURflo
Type
Fresh Water Pumps
Voltage Description
12V DC
Flow Rate Description
7 LPM (1.8 US GPM)
Cut Out Pressure Description
30 PSI / 2 Bar
Whale's manual galley pumps are truly design classics. Since the 1960s these manual pumps have been designed, refined and manufactured by our skilled UK based workforce. Self priming Lever operated hand pump. Ideal for installing between two sinks- swivelling outlet fine flow control. 7 litres capacity per minute
Key Features
Easy operation
Light back & forth pump action
Suitable for fresh watered saltwater
Brand
Whale
Type
Cold Tap
Model
Flipper MK4
Height Description
Overall: 304mm
Width
Body: 61mm
Depth
Body: 103mm
Finish
Aluminium
Material
Aluminium Alloy Outlet
Colour
Aluminium
Diameter Description
Base: 54mm
Application
13mm Inside Diameter Hose
Capacity Description
7 LPM
Country of Origin
United Kingdom
Downloads
Whale Pump Brochure
Whale Pump Brochure
Whale Gulper 220 is a wastewater pump particularly designed to handle hair and gels, making it ideal as a shower waste pump. It features a body constructed from aluminium and glass-filled nylon for a robust housing suitable for the marine environment along with rubber feet designed to absorb vibration. Popular diaphragm pump, will run dry without damage and self priming up to 3m. Multi-directional head. Up to 14 litres per minute. Dimensions: 117mm x 173mm (including hose tails) x 273mm Connections Type: 19mm hose tails Fuse Requirement: 5A.
Maximum Pump Head
2.3 to 4.27 Metres
Dimensions
Base: 135mm x 111mm (5-5/16" x 4-3/4")
Maximum Combined Head and Lift
4m (13.1ft)
Maximum Recommended Head
3 Metres (9.8 Feet)
Replaces
Closest Alternative for 509430 & 509432 Flojet Shower Waste Drain Pumps
Self Primes up to
3 Metres (9.8 Feet)
Wire Size
Minimum 1.5mm² (16 AWG)
Inlet Outlet
19mm (3/4") ID hose
Brand
Whale
Type
Toilet Pumps
Voltage Description
12V DC
Model
BP1552
Height Description
117mm (4-5/8")
Width
173mm (6-13/16")
Length
273mm (10-3/4")
Fuse
5A
Flow Rate Description
14 LPM (3 GPM / 3.7 US GPM)
Approvals
CE Marked, IP45 rated for water ingress, Ignition protected ISO8846, ISO10133 Electrical systems – extra low voltage dc installations
Warranty
2 Years
Country of Origin
United Kingdom
Downloads
Installation Sheet
Product Sheet
Technical Article - Waste Tanks & Kits
Enamelled steel with stainless steel flange and internal rubber membrane. Can be mounted in any attitude.
• Dimensions: 230mm(H) x 125mm(D)
• Connections Type: 1/2” BSP threaded spigot
• Pressure: Max 4 bar (60 psi)
Key Features
For small to medium-sized pressure systems
May be mounted in any attitude
Stainless steel and rubber wetted parts
Brand
Jabsco
Type
Accumulator Tanks
Height Description
230mm (9")
Diameter Description
125mm
Capacity Description
2 Litres (0.5 US Gallons)
Connections Description
1/2" BSP
Working Pressure
4 bar (60psi)