10mm ID EPDM Hose designed the Bobil New Hybrid system. Reinforced rubber hose sold by the meter, useful if you need to extend the distance between your Bobil tank and your heat exchanger.
Ordering multiples of this product will be sent as one uncut length, and will be combined with any hose included in a water heating kit.
A Simple fuel standpipe, useful if you wish to install a separate fuel tank for your diesel heater and install the fuel line in from the top. Pipe can be cut the required height.
Pipe length: 68.5cm
Pipe diameter: 5mm
Bolt thread diameter: 8mm
This stainless steel Mounting box is suitable for AUTOTERM Air 2D/4D air heater.
Mounting box ensures a safer installation of the heater unit, as it is made out of stainless steel it can also be installed under the floor of vehicle.
This product MUST be bought with a heater to ensure the correct parts come with the box for your heater. Please ensure a heater is present in your total order when ordering this product. Ordering this box will mean you'll recieve 1.5m of ducting, which will extend to 2m TOTAL. And you will also get 1 extra vent when ordering this.
If you want to order this box for an existing heater, to replace your turret plate, then you'll need extra parts and need to contact us.
What mounting plate do I need? YouTube video
Easy-to-mount awning tent to create a light, spacious outdoor living room.
Thule Sizing Chart PDF
Perfect Roof Sealing Thanks To Clamping Profiles To Mount The Side Panels And Connect Them With The Awning Fabric
Seal Off The Space Between The Vehicle Wall And The Side Panel Using An Adjustable Mast Profile With Double Rubber Flaps
Made Of High-Quality PVC Fabric
Perfect Air Circulation When The Tent Is Closed Via Aerations On Both Sides. Two Side Windows Are Also Equipped With Mosquito Mesh
Side And Front Panels Can Be Rolled Upwards For Easy Entrance
Before Ordering Check Your Awning Model And Mounting Height
(Measure From Floor To Underside Of Awning Box)
Still Unsure?
Speak with An Engineer
07407221667
Compatibility - Vans Motorhomes Caravans Minivans
Awning fit - Thule Omnistor 4200,5200,6300,8000,9200
Min mounting height - 2.15 m
Max mounting height - 3.10 m
Stay - Long
Set-up time - Fast
Materials - PVC fabric
Weight - 27 - 35.5 kg
Min mounting height - 2.15 m
Max mounting height - 2.30 m
Materials - Airtex
Weight - 29.6 - 35.5 kg
Curtains - Optional accessory
Windslip - Supplied as standard
Wheel cover - Optional accessory
Bag - Luxury bag
Please see Thule Residence G3 Awning Room Fitting Instructions Below:
Thule Residence G3 Awning Room Instructions
Thule Sizing Chart PDF
Height Categories
Small: 2.15-2.29m.
Medium: 2.30-2.44m.
Large: 2.45-2.59m.
XL: 2.60-2.74m.
XXL: 2.75-2.89m
XXXL: 2.90-3.10m
4200/5200 Side Panels Will Also Fit 4900 & 5003 Model Awnings (3.0m)
[Special Models For VW T5/T6, Eriba Caravan & H2 Ducato/Boxer Vans]
The Sunshine Solar panels are ideal for keeping 12V batteries topped up. Solar panels are suitable for a wide range of applications however the most common uses for our 120 watt solar panel includes supplementing the leisure battery power in caravans, motorhomes and boats.
Description
With a Sunshine 150W solar panel you could expect to generate around 40 amps per day when used in conjunction with a PWM solar charge controller and around 50 amps per day with an MPPT solar controller during the summer months. Multiple panels can be connected to acquire higher power if needed.
Specifications
Maximum Power (Pmax): 150W
Maximum Power Current (Ipm): 8.09A
Maximum Power Voltage (Vpm): 18.56V
Short Circuit Current (Isc): 8.58
Open Circuit Voltage (Voc): 21.76V
Nominal Operating Cell Temp. (NOCT): -40 to 80°C
Maximum System Voltage: DC500V
Size: 768 x 1045 x 30mm
Weight: 7.4kg
Features
Full Black
900mm of 4mm single-core insulated cable, fitted with MC Type 4 connectors
High Performance Monocrystalline Cells
Factory fitted aluminium frame with pre-drilled mounting holes
Multiple pieces can be connected to acquire higher power
Suitable for charging all types of 12 volt batteries
Fitted with bypass diodes to minimise the effect of shading
Completely weatherproof
Guaranteed Performance
5 Years Manufacturers Warranty
10 Years Warranty 90% Power Output
25 Years Warranty 80% Power Output
Suitable Solar Charge Controllers
PWM Solar Controller 20A - 12/24V
PWM Dual Battery Controller 20A - 12/24V
MPPT Solar Controller 20A - 12V/24V (10% - 30% more power generation)
MPPT Dual Solar Controller 20A - 12V/24V (10% - 30% more power generation)
For the best performance we would recommend 4mm single core cable is used the same as the existing cable already attached to the solar panel junction box. The most efficient method of extending the existing cable is by using 4mm single-core cable fitted with a pair of compatible MC Type 4 Solar Connectors.
The SRGH120 is a glass free monocrystalline solar module fitted into a black aluminium frame. Only weighing approximately half that of a rigid glass solar panel, makes it perfect where weight restrictions are required. The high strength design and impact resistance prevents deformation caused by heat and load and defends against hail, whilst the innovative super insulation and honeycomb structure enhances heat dissipation and energy conversion efficiency.
Description
With this Sunshine 120W solar panel you could expect to generate around 31 amps per day when used in conjunction with a PWM solar charge controller and around 40 amps per day with an MPPT solar controller during the summer months. Multiple panels can be connected to acquire higher power if needed.
Specifications
Product Code. SRGH120
Max Power. 120W ± 3%
Max Power Voltage. 19.1V
Max Power Current. 6.29A
Open Circuit Voltage. 22.3V
Short Circuit Current. 6.60A
Normal Operating Cell Temp. -20 to 75°C
Max System Voltage. DC1000V
Dimensions. 1180 x 620 x 11mm
Weight. 3.23kg
Features
3m of twin-core insulated cable
High Performance Monocrystalline Cells
Factory fitted aluminium frame with pre-drilled mounting holes
Multiple pieces can be connected to acquire higher power
Suitable for charging all types of 12 volt batteries
Fitted with bypass diode
Completely weatherproof
Guaranteed Performance
10 Years Warranty
20 Years Service Life
Suitable Solar Charge Controllers
PWM Solar Controller 10A - 12/24V
Dual Battery Controller 10A - 12/24V
MPPT Single Solar Controller 10A - 12/24V (10% - 30% more power generation)
MPPT Dual Solar Controller 10A - 12/24V (10% - 30% more power generation)
Please Note: If you are connecting multiple panels together you may need a bigger solar controller if you are unsure which you require or have any other questions please call 01508 488188 then Option 2 for Technical.
Save Money.....on a selection of Add-on items when you purchase them with this product.
Please view the document below for more info
Instruction
The Sunshine Solar panels are ideal for keeping 12V batteries topped up. Solar panels are suitable for a wide range of applications however the most common uses for our 100 watt solar panel includes supplementing the leisure battery power in caravans, motorhomes and boats.
Description
With a Sunshine 100W solar panel you could expect to generate around 26 amps per day when used in conjunction with a PWM solar charge controller and around 33 amps per day with an MPPT solar controller during the summer months. Multiple panels can be connected to acquire higher power if needed.
Specifications
Maximum Power (Pmax): 100W
Maximum Power Current (Ipm): 5.19A
Maximum Power Voltage (Vpm): 19.28V
Short Circuit Current (Isc): 5.5A
Open Circuit Voltage (Voc): 22.92V
Nominal Operating Cell Temp. (NOCT): -45 to 80°C
Maximum System Voltage: DC500V
Maximum Series Fuse: 9A
Size: 450 x 1160 x 30mm
Weight: 5.5kg
Features
Shingle-technology for increased stability and size reduction
700mm of 4mm single-core insulated cable, fitted with MC Type 4 connectors
High Performance Monocrystalline Cells
Factory fitted aluminium frame with pre-drilled mounting holes
Multiple pieces can be connected to acquire higher power
Suitable for charging all types of 12 volt batteries
Fitted with bypass diodes to minimise the effect of shading
Completely weatherproof
Guaranteed Performance
5 Years Manufacturers Warranty
10 Years Warranty 90% Power Output
25 Years Warranty 80% Power Output
Suitable Solar Charge Controllers
PWM Solar Controller 10A - 12/24V
PWM Dual Battery Controller 10A - 12/24V
MPPT Solar Controller 10A - 12V/24V (10% - 30% more power generation)
MPPT Dual Solar Controller 10A - 12V/24V (10% - 30% more power generation)
Please Note: If you are connecting multiple panels together you may need a bigger solar controller if you are unsure which you require or have any other questions please call 01508 488188 then Option 2 for Technical.For the best performance we would recommend 4mm single core cable is used the same as the existing cable already attached to the solar panel junction box. The most efficient method of extending the existing cable is by using 4mm single-core cable fitted with a pair of compatible MC Type 4 Solar Connectors.
Please View Doc Below For More Info
Instructions
The XTRA Series of controllers are a cutting-edge solar charge control solution. Featuring a built-in Bluetooth module for easy mobile app parameter control, advanced MPPT algorithms for efficient energy tracking, and features like independent voltage regulation and comprehensive electronic protections, these controllers provide a reliable and durable solution for a variety of solar applications, from RVs to household systems.
Description
XTRA-N G3 BLE series controllers are based on a new design concept, featuring a Bluetooth module which allows you to read and write parameters via Apple and Android Smartphones. The controllers adopt the advanced MPPT control algorithm, improving the maximum power point (MPP) tracking and acting speed. By minimizing the MPP loss rate and time, the controllers can track the MPP quickly to obtain the maximum energy under any conditions.
Independent voltage regulation, namely, the battery terminal of the controller can be connected to loads directly when there is no battery, this is a new added function. The Xtra Series are lithium batteries friendly, avoiding the instability output voltage caused by the internal protection of the lithium batteries.
Low self-consumption design significantly reduces the static power consumption and extends system standby time.
The Xtra Series perform well under the high temperature ensuring system stability. IP33 Ingress protection and isolated RS485 com port design improves the controller’s reliability to meet different application requirements. XTRA-N G3 BLE series adopts a three-stage charging mode, which effectively prolongs the battery's lifespan and improves performance. Comprehensive electronic protections, such as overcharge, over-discharge, PV & battery reverse polarity, etc., helps to protect the solar system components. This controller are widely used for RVs, Motorhomes, Caravans, Boats household systems, etc.
Features:
High quality and low failure rate components of ST or IR to ensure the service life
Advanced MPPT technology & ultra-fast tracking speed, tracking efficiency is up to 99.5%
Maximum DC/DC transfer efficiency is as high as 98.5%; full load efficiency is up to 97.2%
Advanced MPPT control algorithm to minimize the lost rate and lost time
Accurate recognizing and tracking of multi-peaks maximum power point
Wider MPP(maximum power point) running voltage to optimize PV utilization
Support multi battery types including lithium batteries
Equipped with a stable self-activation function for the lithium battery
Set the battery voltage parameters on the LCD
Battery temperature compensation
Limit the charging power & charging current to no higher than the rated value
Real-time energy statistics function
Charging power reduction automatically for over-temperature
Built-in Bluetooth to adjust settings through EPEVER APP
RS485 communication interface with optional 4G or Wi-Fi modules for remote monitoring
Setting parameters via the PC software, APP, or remote meter
Constant voltage output function
Comprehensive electronic protections
Multiple load work modes
Dustproof and waterproof design with IP33 enclosure
Low self-consumption, lower than 10mA
Operation at full load without charging power being reduced in the working temperature range
Our 185W solar panel is the most powerful of the Sunshine Solar range for 12V battery charging if you are looking for faster power generation this solar module will deliver. The high wattage output combined with high efficiency monocrystalline cells make this solar panel of particular interest for motorhome uses, static caravans, mobile homes, live aboard boats where larger power requirements are generally required.
Description
With a Sunshine 185W solar panel you could expect to generate around 52 amps per day when used in conjunction with a PWM solar charge controller and around 62 amps per day with an MPPT solar controller during the summer months. Multiple panels can be connected to acquire higher power if needed.
Specifications
Product Code. SRG185
Max Power. 185W ± 3%
Max Power Voltage. 18.8V
Max Power Current. 9.85A
Open Circuit Voltage. 22.0V
Short Circuit Current. 10.43A
Nominal Operating Cell Temp. -45 to 85°C
Max System Voltage. DC1000V
Dimensions. 1000 x 960 x 35mm
Weight: 8.7kg
Features
900mm of 4mm single-core cable fitted with MC Type 4 Connectors
High Performance Monocrystalline Cells
Factory fitted aluminium frame with pre-drilled mounting holes
Multiple pieces can be connected to acquire higher power
Suitable for charging all types of 12 volt batteries
Fitted with bypass diodes to minimise the effect of shading
Completely weatherproof
Guaranteed Performance
5 Years Manufacturers Warranty
10 Years Warranty 90% Power Output
25 Years Warranty 80% Power Output
Suitable Solar Charge Controllers
PWM Solar Controller 20A - 12/24V
PWM Dual Battery Controller 20A - 12/24V
MPPT Solar Controller 20A - 12V/24V (10% - 30% more power generation)
MPPT Dual Solar Controller 20A - 12V/24V (10% - 30% more power generation)
Please Note: If you are connecting multiple panels together you may need a bigger solar controller if you are unsure which you require or have any other questions please call 01508 488188 then Option 4 for Technical.
For the best performance we would recommend 4mm single core cable is used the same as the existing cable already attached to the solar panel junction box. The most efficient method of extending the existing cable is by using 4mm single-core cable fitted with a pair of compatible MC Type 4 Solar Connectors.
Please view the Doc below for more info
Instructions
Thetford determined some important shifts in the RV market, like a growing focus on carefree travelling, electrification and homelike comfort in recreational vehicles. The new T2000 series 12V refrigerators is fully matching this shift and therefore might well become the new standard.Looking for a top-quality fridge freezer that won't let you down? Look no further than the Thetford T2160 12v compressor fridge freezer! This massive fridge freezer is perfect for larger campervans, caravans, motorhomes and marine vehicles, and can store up to 158 litres of food and drink - meaning you'll never have to compromise on your ingredients again.The Thetford T2160 12v fridge freezer is also extremely efficient, meaning you'll save valuable power on your travels. And with a host of features including an automatic defrost function and LED interior lighting, this fridge freezer really is the complete package.If you're looking for a top-of-the-line fridge freezer that has it all, the Thetford T2160 12V Compressor Fridge Freezer is the perfect choice. This fridge freezer boasts a large 158 litre storage space, making it ideal for families or those who like to entertain. Additionally, the CI-BUS compatible design means it can communicate with the latest smart control panels. Other features include automatic temperature control, separate freezer temperature regulation, shelf food retainers, slide-out food box, flush door handles, and capacitive touch panel control. Plus, there are no external vents required!
Thetford T2160 12V Compressor Fridge Freezer Features
With integrated air ventilation for easy plug & play
Automatic temperature control
Climate class SN-T
Separate freezer regulation
Slide-out box
Shelf food retainers
Flush door handle
frozen food drawer at bottom
Cool unit at the bottom
Absorption equivalent available
Specifications
Average ampere usage** : 44.0 Ah/24h
Climate class : Day mode: SN-T(10°C-43°C) Night mode: SN(10 °C -32°C)
Control panel : Capacitive touch
Door shape : Flat
Door type hinging : Right hinge
Energy consumption ** : 0,55 kWh/24h
Location freezer : External drawer
Main dimensions (h x w x d) : 1245 x 525 x 563 mm
Net weight : 37,4 kg
Total volume** : 158 L
Volume frozen food compartment : 30,5 L
Part Number: 692557SP & 692943SP
* The refrigerator door can be easily converted from right to left.** Refrigerators originally built in by a manufacturer can have different specifications. Average energy consumption at an ambient temperature of 25ºC.
Sunshine Solar 190w 12vMono
Our 190W solar panel is the most powerful of the Sunshine Solar range for 12V battery charging if you are looking for faster power generation this solar module will deliver. The high wattage output combined with high-efficiency monocrystalline cells makes this solar panel particularly interesting for motorhome uses, static caravans, mobile homes, and live-aboard boats where larger power requirements are generally required.
With a Sunshine 190W solar panel you could expect to generate around 63 amps per day with an MPPT solar controller during the summer months. Multiple panels can be connected to acquire higher power if needed.
Specifications
High Efficiency Monocrystalline Cells
Maximum Power (Pmax): 190W
Maximum Power Current (Ipm): 9.80A
Maximum Power Voltage (Vpm): 19.4V
Short Circuit Current (Isc): 10.28A
Open Circuit Voltage (Voc): 22.7V
Nominal Operating Cell Temp. (NOCT): -45 to 80°C
Maximum System Voltage: DC1000V
Size: 1450mm x 680mm x 35mm
Weight: 9.0kg
Features
900mm of 4mm single-core cable fitted with MC Type 4 Connectors
High Performance Monocrystalline Cells
Factory fitted aluminium frame with pre-drilled mounting holes
Multiple pieces can be connected to acquire higher power
Suitable for charging all types of 12 volt batteries
Fitted with bypass diodes to minimise the effect of shading
Completely weatherproof
Guaranteed Performance
5 Years Manufacturers Warranty
10 Years Warranty 90% Power Output
20 Years Warranty 80% Power Output
Suitable Solar Charge Controllers
PWM Solar Controller 20A - 12/24V
PWM Dual Battery Controller 20A - 12/24V
MPPT Solar Controller 20A - 12V/24V (10% - 30% more power generation)
MPPT Dual Solar Controller 20A - 12V/24V (10% - 30% more power generation)
Please view the link below for more info.
Sunshine Solar SRG190
Lippert Modular Smart Bed Electric Lifting System for motorhomes and campervans. Complete kit includes motor unit, frame, and brackets. Fits up to 2000×1600mm. 250kg lift capacity. Heavy-duty steel and aluminium. Free UK delivery.
Extended Guides Availible!
Lifting system Electric Bed
Engineered to lift and / or lower in the rear garage, above the dinette or driver’s seat
High-performing gear motor with optional integrated encoder
The device fits completely under the bed frame and offers maximum fitting flexibility
Complete bed lifting system is ready for installation (comes with or without the bed frame)
Includes manual emergency system
Heavy-duty steel and aluminum construction
Available with an advanced control system to manage different positions
Technical specifications may change depending on customer request
Available with wall-mounted supports
Smart Bed Manuals
Smart Bed Universal Kit Oem Installation Manual (EU)
Smart Electric Bed (A)
Includes all components required: motor unit, stabilization rails, shafts, fixing plates and 4 m belts
Adapts to standard measurements up to a maximum of 2.000 × 1.600 mm
Includes a Lifty handle for manual use
Smart Frame (B)
Allows you to create a custom bed frame for your unique vehicle space
Includes standard wooden slats and slat holders that can be cut to size
Smart Accessory (C)
Attaches the smart bed frame (B) to the bed lifting system (A)
Stroke Range 300 to 1.500 mm
Static Load Lift 250 kg
Brand
Lippert
Type
Bedframe
Width
1.300 mm
Length
2.000 mm
Weight
23kg (boxed)
The Smart Bed Lifting system can bear a total maximum weight of 362 kg
Provides a customized bed solution for each unique vehicle layout
A mechanical kit including motor unit, adaptable to standard measurements up to a maximum of 2000mm x 1600mm. Each lifting kit includes guides, shafts, fixing plates and belts (length up to 4000mm).
The kit is supplied with a crank so it can be used manually in the event of an emergency. This kit is to be used in conjunction with Bed Frame Kit 40300 and the 40304 brackets.
For more info, please view the PDF links below
Smart Bed Manuals
Smart Bed Universal Kit Oem Installation Manual (EU)
Product Component
12600-M000 Standard
Specification Sheet
TI-360: Topline Bedlifting Plus Programming Limit Positions (EU)
THIS KIT IS TO BE USED IN CONJUNCTION WITH BED FRAME KIT Z2002 AND BRACKETS KIT Z2001.