The Combi D 4 E is structurally identical to the Combi D 4, the only difference being the integrated electric heating elements. The diesel version is equipped with a high-quality burner and therefore reliably heats the vehicle while driving.
(Diesel, Electrical, Hot Water)
At the camp site, simply switch over to electrical mode and run the heater with 230 V, with no need for the vehicle battery. Depending on the required output, choose between diesel, electric or mixed mode: in milder weather, set the appliance to electrical mode, on colder days to diesel mode and in extremely cold weather use mixed mode – diesel and electrical mode. Through four air outlets, the warm air flows into the vehicle where it is distributed optimally.
The powerful Combi D 4 E heats small and medium-sized vehicles within a short time. The appliance also has a 10-litre water tank, which is heated at the same time when hot water is required. This means that you do not need an additional water heater, which saves space and weight. The Combi heater is also very compact and offers many different installation options.
The Combi D 4 E is controlled and monitored with the digital Truma CP plus (iNet ready) control panel or via the iNet X System.
Product contents:32368
Combi D 4 E (33416-78)
Combi frost control JG assy (36100-52)
Truma iNet X Panel Bulk Pack (36411-51)
6 Metre control cable (36110-52)
Duct kit Combi D 1.0M BPK12 (34502-73)
Wall Cowl Inner Part (36140-51)
Cowl outer part black ZR80 (36151-59)
Cable 4 metre for room sensor (34000-71900)
Fuel line 5x1.5mm BPK 100M (34020-01315)
Caravan Heater Pack FTG 820x1070 (358710)
Caravan Heater Pack Top FTG 580x480x30 (358713)
Caravan Heater Pack Outer 587x487x440 (358707)
Can also be operated with an empty water tank
FrostControl drain valve is installed
Simple operation with the digital Truma CP plus (iNet ready) control panel or via iNet X System
Optimum warm air distribution via four air outlets
10-litre stainless steel water tank
Compact and space-saving, various installation options
Heats the vehicle and water very quickly
Uses little energy
Integrated pressure sensor automatically controls the combustion air infeed
Long service life thanks to efficient combustion control
Automatic climate control possible in combination with a Truma air conditioner
Key Features
Heat Hybrid: integrated electric heating elements for additional electrical power
2 in 1: heats your vehicle and heats water at the same time
For small and medium-sized vehicles
Brand
Truma
Type
12 & 230 Volt
Voltage Description
12 / 230V
Model
Combi D4 E
Height Description
300mm
Width
450mm
Length
510mm
Weight
16.8g
Flow Rate Description
Air: max. 287 m³/h
Operating Pressure
30 mbar
Consumption
Fuel: 0,1 – 0,4 l/h
Application
Caravans, Motorhomes
Capacity Description
10 Litres (2.6 US Gallons)
Heat Output
Diesel Mode: 1000 W/2000 W/3000 W/4000W
Electric Mode 900 W/1800 W
Mixed Mode: max. 3800 W
Contents
Combi D 4 E, Combi frost control JG assy, Truma iNet X Panel Bulk Pack, 6 Metre control cable, Duct kit Combi D 1.0M BPK12, Wall Cowl Inner Part, Cowl outer part black ZR80, 4 Metre cable for room sensor, Fuel line 5x1.5mm BPK 100M, Caravan Heater Pack FTG 820x1070, Caravan Heater Pack Top FTG 580x480x30, Caravan Heater Pack Outer 587x487x440
Downloads
Declaration of Conformity UK April2018 Combi 4 4e
Operating Instructions Truma CP plus
Operating Instructions Truma Heating Combi e EN
Stable, automatic slide-out steps for easy and safe entry to your vehicle.
Features
High performing sliding RV step
Load security - step does not operate with more than 15kg load
Quality parts with proven reliability
Easy to stow manually and without tools in case of power failure
Clever multifunctional cable outlet to avoid water and dust infiltration
Perfect protection against dust thanks to the integrated brushes
Safe entrance thanks to anti slip strips
No sharp edges on the front side
Footboard made of corrugated, anodised aluminium
Strong yet lightweight materials
Different mounting sets for vans available (for 2007 > Ducato/Boxer See G2 Ducato step)
Technical specifications
Compatibility
Vans Motorhomes
Materials
Corrugated anodised aluminium
Step width
400=407mm, 550=552mm, 700=707mm
Total width
400=452mm, 550=597mm, 700=752mm
Operation
12V motor
Weight
400=5.80kg, 550=6.6kg, 700=7.7kg
Accessories
308200 Relay Kit - Auto retract step on ignition turn on
308812 Control Box - Step automatically slides in & out when door is opened
301477 - LED Kit for G2 & V18 slide out step
Enhance your campervan or motorhome with Vamoose Multi Rails designed for Thule and Fiamma awnings. These versatile rails provide a secure and stylish solution for mounting awnings, offering both practicality and durability. Ideal for outdoor adventures, the rails are crafted to fit a wide range of vehicles with ease. For optimal awning support, order Part No. DV100—the custom awning bracket designed to perfectly fit the Combi Rail. Upgrade your setup today for a seamless and reliable camping experience."
Stable, automatic slide-out steps for easy and safe entry to your vehicle.
Features
High performing sliding RV step
Load security - step does not operate with more than 15kg load
Quality parts with proven reliability
Easy to stow manually and without tools in case of power failure
Clever multifunctional cable outlet to avoid water and dust infiltration
Perfect protection against dust thanks to the integrated brushes
Safe entrance thanks to antislip strips
No sharp edges on the front side
Footboard made of corrugated, anodised aluminium
Strong yet lightweight materials
Different mounting sets for vans available (for 2007 > Ducato/Boxer See G2 Ducato step)
Technical specifications
Compatibility
Vans|Motorhomes
Materials
Corrugated anodised aluminium
Step width
400=407mm, 550=552mm, 700=707mm
Total width
400=452mm, 550=597mm, 700=752mm
Operation
12V motor
Weight
400=5.80kg, 550=6.6kg, 700=7.7kg
Accessories
Step Brackets 301899
308200 Relay Kit - Auto retract step on ignition turn on
308812 Control Box - Step automatically slides in & out when door is opened
301477 - LED Kit for G2 & V18 slide out step
Two-Burner gas hob with glass lid, 480 X 370mm
A great space-saving two-burner hob with glass lid bringing cooking convenience to small spaces.
Dimensions product depth 370 mm
Dimensions product height 91 mm
Dimensions product width 480 mm
Net weight 4.1 kg
Cut out width 466.00 mm
Cut out depth 358.00 mm
Compact two-burner hob
Heat-resistant safety glass lid provides more workspace when closed
Easy-to-clean detachable pan grids
Safety ignition system
Version without Drain
Technical specifications
Compatibility
MotorhomesCaravans
Materials
Corrugated anodised aluminium
Step width
551 mm
Total width
551 mm
Operation
12V motor
Weight
4.8 kg
Country of origin
Belgium
Model number
309968
Instructions Below👇🏾
Thule Single Step V15
Relay for Thule Steps 12v Instructions
Thule step optional Electronic set Instructions
The Datatool Evo is an easy to fit alarm system designed for motorcycles and scooters with a 12v battery. Using a sophisticated movement sensor, the Datatool Evo constantly monitors for signs of unauthorised movement, triggering the loud integrated siren when the movement exceeds the permitted level. The movement sensor can be adjusted via the remote control to one of three levels to customise the alarm to your preference.
The Datatool Evo also monitors the battery voltage, triggering the alarm if the voltage rises suddenly indicating the engine has been started and also provides visual notification of a low battery by reducing the flash rate of the deterrent LED.
Datatool Features:
Transport Mode: Ability to arm without movement sensing if the bike or scooter is being transported.
Alarm Diagnostics: If the alarm has triggered whilst you were away, the Datatool Evo will bleep a code to tell you which input caused the trigger.
Panic Mode: The ability to trigger the alarm from the remote control
Automatic Rearm: With this optional feature enabled, the Datatool Evo will rearm automatically if someone tries to disarm the alarm and the engine isn’t started within 30 seconds.
Arm/Disarm Tones: Another optional feature, the Datatool Evo can get programmed to ‘chirp’ on arm and disarm and there are 2 options on the ‘chirp’ volume. Note: Certain countries including the UK require alarms to arm/disarm silently, check legislation for your country.
Optional Seat Switch / Luggage Loop: Separate trigger wire. You can combine this with a magnetic seat switch or inline connector to extend the level of protection.
Prewired with an inline fuse and terminals ready to connect directly to the vehicle battery
The LED is a plug-in connection meaning it does not require soldering to install.
‘Protected by Datatool’ decal to highlight to potential thieves that security is present.
Remote control
THESE UNITS ARE NO LONGER SUPPLIED WITH THE PROTECTED BY DATATOOL DECAL BADGE
Use this additional bracket kit when fitting an awning longer than 3.0m to a multi rail using the DV100 Adapter Kit
CENTRE BRACKET KIT FOR DV100 KIT
DOWNLOAD TIPS FOR BRACKET
Memo Van-Swing Swivel
The Memo Van-Swing has a smart hinge pivoting construction, with which you can easily turn the bike carrier away from the rear doors, even if there are bikes on it.
This means that the luggage compartment of your Motorhome / Van is always easily accessible. The Van-Swing is suitable for almost every standard bike carrier for the towbar. It can carry a total of 60 kg, in most cases sufficient for your bike carrier and two bikes.
Locking Pin:
The swing has a locking pin that allows you to lock the carrier when closed, to prevent it swinging open when moving.
Mounting on a flange ball:
The Van-Swing is mounted on the existing towbar with a flange ball and fits directly on most brands of towbars. This construction offers an easy solution for your campervan and gives the Van-Swing more load capacity. The Van-Swing may not fit (directly) on your towbar, for some variants, we have solutions available. Get in contact for the right solution.
European type approval
The Van-Swing has a European-type approval. You are guaranteed to be safe on the road.
Note: The van swing is not suitable for towing trailer loads.
Video
Brand
Memo Europe
Type
Mounting Kits
Width
Width: 960 mm. Width from the centre of the campervan: 900 mm
Weight
Payload: 60 kg (including bicycle carrier). Own weight: 22 kg
Material
Powder-coated steel
Colour
Black
This right-hinged Van-Swing swivel module is designed for van conversions and can be fitted to a new or existing towbar allowing the user to attach their own bike carrier.
The Van-Swing uses the existing fitting points on a towbar and carries bikes at knee height – making it ideal for heavy E-bikes as they will not have to be lifted high. This pivoting module gives the user the option to swing the bike carrier with the bikes loaded, allowing the vehicle’s rear doors to open.
Due to the use of existing fitting points, modifications to the vehicle are not necessary. This module is suitable for all Ducato models from 2006 onwards and is supplied with an integrated 13-pin socket to extend the existing socket.
To check existing towbar compatibility or for advice on purchasing a new towbar,.
Please note: The VAN-Swing is NOT supplied with a bike carrier but is suitable for use with most towball-mounted bike carriers.
Compatible van models:
• Citroen: Jumper, Relay
• Fiat: Ducato
• Peugeot: Boxer
Brand
Memo Europe
Type
Mounting Kits
Depth
200mm (from bumper)
Weight
20kg
Material
KTL and Powder-coated Steel
Colour
Black
Maximum Load Description
60kg (including bike carrier)
Mounting Description
Towbar
Country of Origin
Netherlands
The inner tank is made of enameled steel plate – very tough, very strong, resistant to corrosion and water scale, giving a long life.
Ultra thick, Non-CFC Polyurethane Foam to prevent heat loss & reduce energy costs.
Clever design, novel and functional appearance makes it easy to mount in a bedbox, locker or under seat storage area.
Temperature meter and adjustment knob.
Multiple protection devices against, over temperature, over pressure and electricity-leakage.
Choice of pipe connections and comes fitted with 3 pin plug for fast and easy installation.
Technical Specifications
Rated Voltage:
220V
Rated Power:
800 W
Rated Frequency:
50HZ/ 60HZ
Rated Current:
4.1A
Rated Pressure:
0.8MPa (116psi)
Min Start-up Pressure:
0.05MPa (7psi)
Rated Water Temperature:
75°C
Fitted Socket:
250V, 16A
Heating Efficiency:
>90%
Model No: Rated Volume: Product Size (mm): NW (KG): GW (KG):
A1-6LH
6Litre
400x270x260mm
4.8
6.5
A1-10LH
10Litre
600x270x260mm
4.8
6.5
Mounting feet enable easy installation . Supplied water hose connector’s gives options of 12mm push fit female fitting or adapter to 12mm barbed hose connector.
Safety Net -PLEASE SELECT CORRECT SIZE
Luton Safety Net. To secure Luton of motorhome
1500 mm x 580 mm
Material : Aluminium/textile
Luton Safety Net. To secure Luton of motorhome
1800 mm x 580 mm
Material : Aluminium/textile