The carry case for the IP65 charger is one of those indispensable accessories. It protects your charger from the knocks and bangs of workshop life. It allows tidy storage, too – cables never get tangled …or lost; everything is in one place; and if you use an IP65 charger in your work – it gives a professional appearance. Compartments accommodate the charger, its input/output cables; plus the battery-clamp/eyelet cable options. (Charger and accessories not included) Dimensions  Height (mm)  295  Width (mm) - 350  Depth (mm) - 105

Read more less

The 20A Blue Smart IP22 6-stage battery charger with built-in Bluetooth is a professional quality charger featuring microprocessor controlled ‘adaptive’ charging technology. The battery management software monitors the way the battery is used and automatically optimises the charging process to suit the usage pattern, so maintaining your battery in the best possible condition. This smart, multi-stage charger operates at up to 93% efficiency and generates up to 4x less heat than some other comparable chargers. When the battery is fully charged and has not been used for 24 hours, storage mode kicks in and power consumption drops to less than 0.5W. Cooling is achieved by a near-silent fan and the unit is fully protected against over-temperature, short circuit and reverse polarity.  Built-in Bluetooth allows you to monitor the status of your charger via any Android or Apple device or laptop and all settings of the charger can be configured with the VictronConnect app.  Suitable for all lead acid batteries (particularly leisure or 'deep-cycle' batteries) and Lithium-ion batteries used in caravans, motorhomes, campervans, cars, boats, off-road, industrial and commercial vehicles  Recommended for batteries with a capacity in the range of 75 - 120Ah  Features  6-stage adaptive charging (Test - Bulk - Absorption - Recondition - Float - Storage)  High efficiency and low heat generation  Charges all lead-acid batteries (flooded, AGM, Gel) and Lithium-Ion batteries  NIGHT and LOW setting - reduces to 50% nominal output and no-fan for silent operation Near-silent fan  Over-temperature protection  Short-circuit protection for DC output  Reverse polarity protection for AC input (ATO blade fuse)  Green LED to indicate Power ON  Yellow LED for charge status indication (Bulk-fast blinking / Absorption-slow blinking / Float-solid / Storage-off)  Screw terminals for connection  Can be used as a power supply when no battery is connected  Charger reduces output current at high temp rather than shut-down  Setup, configuration and monitoring by Bluetooth connection  5 year manufacturer's warranty  Specification  Input voltage rating: 180 - 265V AC  Output voltage (Absorption/Float/Storage): 14.2-14.7/13.5-13.8/13.2-13.5 VDC  Max. charge current: 20A  NIGHT or LOW charge current: 10A  No. charging stages: 6 (adaptive)  No. outputs: 1  Minimum battery capacity: 75Ah  'No load' power consumption: 0.5W  Operating temperature: -20ºC to +50ºC (full rated output up to +30ºC, then output reduces)  Cooling method: Fan-assisted  Mains connection: BS1363 UK 3-pin plug on 1.5m cable  Battery connection: Screw clamp terminals for max. 13mm2 cable (note: output cables and connections not included)  Ingress Protection rating: IP22  Body material: Aluminium (blue RAL5012)  Mounting holes: (download Enclosure dimensions below for full details)  Weight: 1.3kg  Overall dimensions: 235 (L) x 108 (W) x 65 (H) mm For more info please download this link>>Pdf

Read more less

The Victron Energy Automotive IP65 Battery Charger 6V/12V-1,1A will automatically adapt its charge algorithm to 6V or 12V batteries making it a very versatile trickle charger for small capacity batteries. DC connector  Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the charger.  Charges 6V and 12V batteries  The charger will automatically adapt its charge algorithm to 6V or 12V batteries Protected against overheating and reverse polarity connection The output current will reduce as temperature increases up to 40°C, but the charger will not fail. Output relay protects against reverse polarity connection. Protected against overheating and reverse polarity connection  The output current will reduce as temperature increases up to 40°C, but the charger will not fail. Output relay protects against reverse polarity connection.  Eight LED’s for status and mode indication  When connected to the AC supply the STAND-BY LED will turn on. No voltage will be present at the output. After connection to a battery (battery voltage must exceed 2V in case of a 6V battery and 7V in case of a 12V battery), charging is initiated by pressing the MODE button. The state of charge of the battery is indicated by 4 LED’s:  1. Red LED marked 25% flashing: state of charge less than 25%.  2. Red LED marked 25% on, and red LED marked 50% flashing: state of charge less than 50%.  3. Red LED’s on, and yellow LED marked 75% flashing: state of charge less than 75%.  4. Red and yellow LED’s on and green LED marked 100% flashing: battery nearly charged.  5. All charge level LED’s solid on: battery fully charged. Flooded, AGM or GEL batteries. Ambient temperature below 10°C, or batteries requiring a higher charge voltage (OPTIMA spiral cell batteries for example).  In case of reverse polarity connection, the orange LED ! will turn on after pressing the MODE button. If the red LED STANDBY remains on, even after pressing the MODE button, the connection to the battery is interrupted. The charger always starts in STANDBY mode when connected to the AC supply.

Read more less

A perfectly-sized solution to organizing life's essentials while on the go. Features Organise small essentials such as pens, small electronics, toiletries or charging cables Easily grab and go with oversized loop Technical specifications Colour Black Material Nylon Collection Thule Crossover 2 Collection Model number 3204041

Read more less

Quickly transfer Thule child bike seat between multiple bikes by using an additional quick release bracket. Features Perfect solution for families where two people need to transport the child Includes screws to mount to round or oval seat tubes Thule One-Key System lock included

Read more less

Custom fit kit for mounting a Thule roof rack system to vehicles without pre-existing roof rack attachment points, or factory-installed racks. Features Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Comes as a package of four and helps to attach a complete roof rack system to your specific car Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs Check the Thule Buyer's Guide to find out which fit kit fits your car Compatible vehicles OPEL Grandland X 5-dr SUV with Normal Roof 2018 - 0 VAUXHALL Grandland X 5-dr SUV with Normal Roof 2018 - 0

Read more less

Mitsubishi L200, 4-dr Double Cab, 05-15 Mitsubishi Triton, 4-dr Double Cab 05-15 Custom fit kit for mounting a Thule roof rack system to vehicles without pre-existing roof rack attachment points, or factory-installed racks. Features Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Comes as a package of four and helps to attach a complete roof rack system to your specific car Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs Check the Thule Buyer's Guide to find out which fit kit fits your car Compatible vehicles MITSUBISHI L200 4-dr Double Cab (KB4T) with Normal Roof 2005 - 2015Triton 4-dr Double Cab (KB4T) with Normal Roof 2005 - 2015

Read more less

Custom adapter kit for mounting a Thule roof rack system to select vehicles. Locks included. Compatible vehicles VOLKSWAGEN Amarok 4-dr Double Cab with Fixed Points 2010 - 0Amarok 2-dr Single Cab with Fixed Points 2010 - 0

Read more less

ABS Waterproof IP66 - Cable Entry Cover 

Read more less

Bostik Simson STR 360 Structural adhesive, enables you to fix your solar panel to a variety of surfaces including caravans and motorhomes without the need to drill any holes! STR 360 is a Silyl Modified Polymer (SMP) based adhesive with a high tensile strength and is suitable for making elastic constructive joints. Applications Elastic bondings and sealings in e.g. bus-, caravan- and trailer construction. Bonding of metals, glass and plastics. Features Colour: White Cartridge Size: 290ml Silyl Modified Polymer  Solvent-, isocyanate- and PVC-free. Good UV-resistance and ageing properties. Permanently elastic in a temperature range of –40°C to +90°C In general, STR 360 adheres well without primer on clean, dry, dust- and grease-free substrates of aluminium, stainless steel, galvanised steel, zinc, copper, brass, powder-coated metal, most lacquered metal surfaces, glass, PVC, polyester (GRP), painted and lacquered wood, etc. No adhesion on untreated polyethene, polypropylene and Teflon. In case of high adhesion demands the use of Simson Prep M is recommended. Prep M degreases and prepares the surface of the substrate in one step. On plain, untreated wooden surfaces and other porous substrates, Simson Prep P is recommended. In case the joint is exposed to UV radiation the bond surface has to be protected by UV-blocking methods like Simson Prep G. For more details concerning Prep M, Prep P and Prep G consult the specific technical information data sheets. For not mentioned substrates and additional information consult Bostik. For more info please download the link below Datasheet1

Read more less

Our digital multitester offers 19 testing ranges and 7 functions. The Digital multitester is a really useful tool to have around when installing solar panels as damaged caused by reversed polarity is very common place during setup, it is very easy to check polarity with the multitester eliminating the risk of damage to the solar panel and associated components. Check bulbs, fuses and batteries with ease. Specifications Power Supply: 9Vdc (1 x PP3 supplied) AC voltage: 200 - 500V DC voltage: 200mV - 500V DC current: 5A Resistance: 200Ω - 2000KΩ Test Lead Length: 570mm Dimensions: 126 x70 x 29mm Weight: 128g Features Supplied with shrouded testing probes PVC shockproof jacket PP3 battery included Transistor test function Continuity audible test function Suare wave testing signal output Low battery indication Complies with EN61010 - 1:2010

Read more less

This set of two battery terminals (Positive & Negative) are compatible with Deep Cycling Leisure Batteries. Bolt on battery terminals will give you better connection between your solar panel and the battery enhancing the charging performance. With a choice of 8mm or 10mm diameter posts.

Read more less