Best Selling Products

To get your journey off to a great start Westfalia-Automotive designed its Bikelander Cycle Carrier with your needs firmly in mind. The Bikelander is easy to mount onto the towbar (no tools are required), is extremely compact and ultra-safe. It can also extend to hold an additional third bike. - Towbar mounted cycle carrier for 2 cycles, expansion rail available increasing the Bikelander’s capacity to 3 cycles- Folds down when not in use for easy storage- Payload of 60kg making it ideal for heavy electric cycles, with a wheelbase of up to 1300mm- Maximum tyre diameter size is 60mm- Vertical loading so there is no strain on your back- LED lights that are longer lasting and easy to replace- Adjustable wheel holders ensure perfect grip on any bike- Thick rubber pads on the wheel holders protect the frame of the cycle- Fold down mechanism facilitates free access to the boot even when loaded- Cycle carrier and all cycles can be locked individually with just one key, offering protection against theft- Expansion rail available increasing the Bikelander’s capacity to 3 cycles- If you’re after additional storage space the Westfalia-Automotive Box or Platform can be added- Weight: 17kg- 5 year warranty **Won't fit Autotrail Motorhomes with bulkhead mounted spare wheel.  

Read more less

YBX Active Leisure and Marine EFB EFB technology for greater endurance, higher cycles and faster charging Optimised for repeated charging & discharging Original equipment quality & specification NCC Verified Class B Sealed maintenance free Supplied charged & ready to fit Enhanced safety features including integrated flame arrestor and carry handle 1200 watt hours 200 cycles Caravans, motorhomes, boats and other modern leisure vehicles feature more technology and electrical appliances than ever before. YBX Active Leisure and Marine batteries are specially designed to provide dependable, stress-free power and long life. Caution - when installed in an occupied space, this battery must be fitted with a breather pipe routed to the vehicle exterior.   Tech Spec Case Type L5 DIN Voltage 12V Capacity at 20-hour Rate (Ah) 100 Cold Cranking Performance (Amps) EN1 850 Mean Weight with Acid (kg) 24 Cell Layout 0 Terminal T1 Length (mm) 353 Width (mm) 175 Height (mm) 190 NCC Class Class B Feature Range Leisure Batteries  

Read more less

A blank plate for fitting to the number plate holder of the bike carrier. Features: To be used in countries where it is not allowed to remove the real plates from the car. Write on it by hand or use stickers. Technical Specifications: Model Number   976200

Read more less

An around-the-bar adapter for fitting your Thule bike rack on square bars, round aluminium load bars, and most other load bars on the market. Technical specifications Model Number - 889800   Warranty Thule is dedicated to providing exceptional products that are quality tested and guaranteed against defects in materials and workmanship.

Read more less

  An adapter for fitting the Thule ProRide or Thule UpRide bike carriers directly into the t-track (30x24 mm) of some BMW and Renault original load bars. Technical specifications  Model Number 889101 Units per pallet 1000   Related products Thule Upride Thule Proride   Warranty Thule is dedicated to providing exceptional products that are quality tested and guaranteed against defects in materials and workmanship.    

Read more less

 Upright bike rack for the quickest, most convenient mounting – for bikes up to 20 kg. Product features Automatically positions your bike when you secure it, thanks to the uniquely designed frame holder and wheel tray Pressure is spread via large, soft claw pads that adapt to your bike’s frame tubes – minimizing the risk of frame damage Quick and easy bike securing – the torque limiter dial controls the force going into the bike frame with a clear sign of correct mounting Safe mounting – your bike is prevented from falling thanks to the claw’s extended lower jaw Stable wheels – firmly fixed in smartly designed wheel holders with diagonal quick-release wheel straps Easy, tool-free interface for switching the bike rack from one side of your car to the other Pre-assembled, no tools required Locks the bike to the bike rack and the bike rack to the roof racks (locks included) Technical Specifications Load capacity 20 kg Dimensions 145 x 32 x 8.5 cm Weight 4.2 kg Fits round frame dimensions 22-80 mm Fits maximum oval frame dimensions 80x100 mm Thru-axle compatible  ✓  Carbon frame compatible  ✓  Adapter/s required: Thule Carbon Frame Protector Fits roof racks with 20x20 mm T-tracks  ✓  Fits roof racks with 24x30 mm T-tracks  ✓  Adapter/s required: Thule T-track Adapter 889-1 Fits Thule WingBar Evo  ✓  Fits Thule WingBar  ✓  Fits Thule ProBar  ✓  Fits Thule SquareBar  ✓  Adapter/s required: Thule ProRide SquareBar Adapter Fits Thule SlideBar  ✓  One Key System compatible  ✓  Model number 598002

Read more less

Sigma S32 The Sigma S Series is designed to work independently as a full remote control system linked to the vehicle’s central door locking, or to interface with the manufacturer’s pre-installed remote locking system. All models are manufactured to the highest European certification standards, including Thatcham approval for the appropriate insurance-approved systems. Utilising the original equipment radio keys, providing perimeter and ultrasonic interior protection Thatcham Category 2 to 1 upgrade alarm system, providing perimeter and ultrasonic interior protection Switched from vehicle’s existing OE remote controls Supplied with self powered siren, and tri-coloured status LED The system has negative lock/unlock outputs to switch negative controlled CDL systems Single immobilisation circuit Key theft protection facility – only with the optional keypad Auxiliary siren, armed accessory, interior lamp illumination and headlamp illumination outputs Sophisticated programming and diagnostic facility via the keypad Security Features Switches securely from the vehicle’s existing OE remote Perimeter protection circuit for boot and bonnet (negative input) Perimeter protection circuit for doors (positive or negative input) Closed loop protection circuit (looped wire to protect accessories, trailers, bike racks etc) Ignition detection circuit Ultrasonic interior protection (base sensitivity adjustable, length of disturbance adjustable, and automatically adjusts if any movement is detected during the threshold time) Single immobilisation circuit (18 amp continuous/30 amp max) Manual arm, using the vehicle’s existing OE remote (or programmable auto arm, which automatically arms the system 60 seconds after the last door is shut – adjustable between 1 and 99 seconds. Auto arm can also be programmed to lock the vehicle if required) Auto re-arm can be programmed to re-arm the system if a door is not opened within 60 seconds of disarming the system -adjustable between 1 and 99 seconds. Auto re-arm also re-locks the vehicle Key theft protection feature can be turned on to prevent the OE radio keys automatically de-activating the immobilisation when the alarm system is disarmed. In this mode the system’s PIN must also be entered into the keypad before the vehicle can be started. This prevents theft of a vehicle even with the owner’s keys Last trigger identification via the dashboard LED and a record of the elapsed time since the last trigger, can be recalled using the keypad The total trigger count memory for each individual circuit since the system was installed or the memory re-set is also stored in the system’s memory Additional plug in single stage sensor socket (see optional accessories) Additional plug in dual stage sensor socket and siren pre-warn facility (see optional accessories) Secure data linked, self powered siren included Convenience Features Negative door locking/unlocking control (with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period) Armed output (negative 200mA max ) Additional siren/pager output (negative 200mA max) Interior lamp illumination output (negative 200mA max) Headlamp illumination output (negative 200mA max) Secure ignition PIN override Secure PIN override using the keypad Silent arm and disarm (audible bleeps can be programmed back on, however this will breach current legislation) The last circuit to trigger can be excluded using the keypad The vehicle’s battery voltage can be checked using the keypad The sensors are excludable using the keypad or repeated arming Personal Safety Features Auto lock can be programmed to lock the vehicle at the start of a journey when the ignition is turned on, and then unlock when the ignition is turned off. This can be excluded on individual occasions Optional Accessories Single Stage Sensors T-TS1 Tilt sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors AS610 Single stage shock sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors AS620 Single zone microwave. Plug in sensor. Only for use in addition to the ultrasonic interior sensors Dual Stage Sensors AS625 Dual zone microwave. Plug in sensor. Only for use in addition to the ultrasonic interior sensors T2SS Dual stage shock sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors Other 2012054 RF pager As a insurance requirement a registered Scorpion installer/Dealer has to do the installation upon purchase details will be sent to a local installer/dealer in your area installation costs depends on vehicle just enquire.  

Read more less

Rechargeable flooded lead acid battery. Measurements Width 173mm x Length 260mm x Height 225mm Approx Weight 20.7 kg Other Specifications Voltage: 12 Ah: 70 Measurements Width 173mm x Length 260mm x Height 225mm Approx Weight 20.7 kg Other Specifications Voltage: 12 Ah: 70 Terminal Layout Fitments Ideal for electric fence use. Look at our Solar Range for ways of charging your battery.

Read more less

The Alde Connection Cable for iNet X Pro is a 0.5-meter cable designed to connect the iNet X Pro system to compatible Alde heating control units. It provides a reliable data and power connection, enabling full integration of the iNet X Pro smart control system for remote monitoring and operation of the heating system. Connection cable for iNet X Pro system Enables integration with Alde heating control units Reliable data and power transmission Suitable for upgrades, service, or new installations Cable length: 0.5 m

Read more less

Fiamma CaravanStore is an easy-to-use awning designed for caravans and minivans. Features include manual operation and tubular rewind for wrinkle-free fabric. Sturdy and lightweight, the Fiamma CaravanStore is easy to use and install - it takes only 45 seconds to completely roll it out. The awning is housed in a soft but sturdy bag fitted with a handy self-lubricating zipper and anti-scratch tape. A double guide on the awning's lead bar allows for the installation of two front panels including the Fiamma Privacy Room and Sun View XL, Blocker and Tie Down S, Sun View XL and Awning Hangers. In addition to panels, accessories such as LED strips can also be fitted to the lead bar. The awning legs are cleverly stored within the roller tube and feature a hinged and telescopic design, making them easy to handle whilst also eliminating the risk of accidental falls or loss during the process. CaravanStore awnings feature a patented system that enables the awning fabric to be rolled in two directions ensuring maximum ease of operation. All parts in contact with the vehicle are fitted with a rubber protection kit. Key Features Easy-to-use awning designed for caravans and minivans Manual operation with a tubular rewind for wrinkle-free fabric Takes only 45 seconds to completely roll out Housed in a soft and sturdy bag for secure storage Self-lubricating zipper and anti-scratch tape on the bar Double guide on the awning's lead bar allows for two front panels and accessories Awning legs are cleverly stored within the roller tube Legs feature a hinged and telescopic design for easy handling and prevention of accidental falls or loss Awning fabric rolls in two directions ensuring maximum ease of operation Specification Suitable For Caravans Brand Fiamma Size 450 Height Description From Ground: 225cm Length Case: 448 cm / Fabric Width:414 cm Weight 14.6 kg Colour Grey Operation Manual Application Caravans Position Awning Rail Case Colour Grey Enclosure Type Privacy Room CS Light, Front, Blocker and Side Extension C 250cm Fabric Colour Royal Grey Series CaravanStore Shade Surface 10.4 m² Country of Origin Italy

Read more less

Electric bed lifting system made from heavy-duty steel and aluminum construction. Device fits completely under the bed frame and offers maximum fitting flexibility.Easy set up of top and bottom positions with moveable magnetic switches.Includes manual override system if power fails.Static Capacity: 300 kg.Lifting capacity: up to 60kg (bed plus 25kg). Kit Includes :- 1400mm Guide Rails with caps, 7000mm Rolling belt profile with belts and fixings, Motor, Magnetic height stop adjusters, Control panel switch & key, Wiring kit, Wall fixing brackets for belts. Optional second switch available - BAL002.17.0013.1 Technical specifications Brand TRV - BALDACCI Product Code MB10001   Please click the link below to view fitting instructions: TRV Lifting Bed Kit Instructions  

Read more less

Memo flanged ball adaptor enables you to adapt your swan-neck towbar to a flanged ball format. (Towball is not included).   Brand Memo Europe Thickness Flat mounting: 30 mm Diameter Description Mounting hole: 10 mm, Flange plate hole: 17 mm Hole Centres Holes: 50 mm, flange plate holes: 90 mm

Read more less