Best Selling Products

MonoControl CS from Truma is a safety gas pressure regulator for caravans and motorhomes. The gas pressure regulator ensures a uniform output pressure of 30 mbar with a permissible inlet pressure range of 0.3 to 16 bar. The integrated crash sensor (CS) interrupts the flow of gas in the event of an accident with directly acting deceleration of 4.0 g ± 1.0 g. The regulator with safety valve is a single-stage gas pressure regulator. If the gas pressure regulator is not working properly, for example due to dirt or other foreign material on the valve, the safety valve opens and blows off to a pressure of 110 mbar. Please note: Using the MonoControl CS in closed rooms (e.g. at home), on boats or in EX Zone 0 (e.g. tankers) is prohibited. The national regulations must be observed if there is a possibility of it being used in mobile homes. Its use in mobile homes is prohibited in Germany. An automatic PRV (Pressure Relief Valve) safety device integrated in the MonoControl CS with limited flow protects the connected consumers against impermissibly high pressure. As soon as an impermissibly high pressure arises on the output side, the PRV opens and blows out the overpressure into the air. The PRV closes automatically after the pressure is reduced. MonoControl CS must not be used for commercial purposes. - Gas type: Liquefied gas (propane / butane) - Admission pressure: 0.3 - 16 bar - Output pressure: 30 mbar - Regulator capacity: 1.5 kg/h - Regulator inlet: Male thread M20 x 1.5 (G.13) - Regulator outlet: Olive screw connection 10mm - Horizontal triggering value: 4.0 g ± 1.0 g - Operating temperature: -20 °C to +50 °C Recommended tightening torque: - 3 – 5 Nm for union nut M20 x 1.5 (G.13) - 16 – 21 Nm for olive screw connection 10mm Key Features Easy to see if the crash sensor has been triggered and easy to reset Lightweight and quick to install 5 Year manufacturer warranty Brand Truma Type Gas Regulators Flow Rate Description Max. 1.5 kg/h Inlet Pressure 0.3 to 16 bar Outlet Pressure 30 mbar Approvals CE 0085 Inlet Connection Male thread M20 x 1.5 (G.13) Outlet Connection Olive screw connection 10mm Fuel LPG Country of Origin Italy Downloads Operating Instructions Truma MonoControl CS

Read more less

Quick and easy shade and privacy thanks to this blind system with an integrated magnetic (slides from left to right). The side windows are completely pre-assembled and are simply secured to the vehicle door frames. All components of the REMIfront cab blinds fit perfectly into the interior design. The blinds do not cover the ventilation openings. Designed for the side windows with an entry handle. Please Note: this blind system is not suitable for vehicles with airbags on the A-pillar and above the doors. Brand Remis Height Description 175mm Width 1070mm Depth 265mm Weight 11kg Application Mercedes Benz Country of Origin Germany  

Read more less

Quick and easy shade and privacy thanks to this blind system with an integrated magnetic catch (slides from left to right). The side windows are completely pre-assembled and are simply secured to the vehicle door frames. All components of the REMIfront cab blinds fit perfectly into the interior design. The blinds do not cover the ventilation openings. Please Note: this blind system is not suitable for vehicles with airbags on the A-pillar and above the doors. Brand Remis Height Description 1100mm Width 1100mm Depth 120mm Weight 5kg Application Ford Country of Origin Germany  

Read more less

Quick and easy shade and privacy thanks to this blind system with an integrated magnetic catch (slides from left to right). The side windows are completely pre-assembled and are simply secured to the vehicle door frames. All components of the REMIfront cab blinds fit perfectly into the interior design. The blinds do not cover the ventilation openings. Designed for the right side windows. For Renault Master (04/2011 - 08/2019) and the structurally identical: Opal Movano and Nissan Interstar. Please Note: this blind system is not suitable for vehicles with airbags on the A-pillar and above the doors. Brand Remis Width 5.5mm Weight 5.5kg Application Renault Country of Origin United Kingdom

Read more less

CTA passenger seat swivel plate 9PG0151501V01 is suitable for PSA vans, including: Citroen Spacetourer (2016 - onwards), Jumpy (2016 - onwards), Peugeot Traveller (2016 - onwards), Opel Vivaro (2016 - onwards) and Toyota ProAce II (2016 - onwards). The swivel plate is made of high strength steel with a black powder coating. Dimensions Distance between mounting hole centres: 371.4mm x 370mm Brand CTA Type Seat Swivels Height Description 33mm Width 415mm Length 434mm Finish Painted Weight 10kg Material Powder Coated High Strength Steel Colour Black Application Citroen Space tourer & Jumpy, Peugeot Traveller, Opel Vivaro & Toyota ProAce II vehicles from 2016 onward

Read more less

Thule Wanderway T6 bike rack is available for standard Volkswagen T6 vans.  It carries two bikes and can increase the load capacity to carry up to 4 bikes by adding a 3rd bike and a 4th bike extension kit. Alternatively, the robust construction lets you carry two e-bikes with a combined weight of up to 60 kg. Everything on the Thule Wanderway T6 is designed for ease of use. Load your bikes easily with easy-to-adjust rails that slide from left to right, and fasten the wheels securely with wheel holders with pump buckles. Once mounted, Thule WanderWay can stay in your car for as long as you like - it is possible to open the vehicle trunk without any mounted bikes. Features Quick and simple to mount thanks to the dedicated fit to the VW T6 minivan. Possible to increase load capacity up to 4 bikes by adding a third bike and a fourth bike adaptor (adaptors sold separately) The raised position of the Thule Wanderway T6 rack keeps the rear lights and license plate visible. Thule Wanderway T6 rails are adjustable from left to right to easily find the best position for your bike. The platform folds up vertically when not in use and folds flat for easy transport and convenient storage. It is possible to open the vehicle trunk without mounted bikes (uprated gas struts required). Possible to increase load capacity up to 4 bikes (extension kits sold separately). Easy mounting of bikes on the Thule Wanderway T6 through detachable bike arms with lockable Thule AcuTight torque limiter knobs that click when optimal torque is reached. Simple to fasten wheels thanks to the adjustable wheel holders with pump buckles. Platform folds up vertically against the boot when not in use Locks the bikes to the bike rack (lock included) Possible to open vehicle trunk without any mounted bikes We provide locks system that reduce the risk of theft but will not constitute a total guarantee against risk of bikes being stolen. For added bike safety we recommend to use Thule Cable lock, Thule Wheel Strap Locks (see accessories section) or any premium high-grade cable lock Technical Specifications Load capacity for bikes  2 (3) (4) Max bike weight 30 kg Max weight capacity 60 kg Max tire width 2.75" For e-bikes Yes Distance between bikes 31 cm Lockable platform Yes One key system compatible Yes Weight 12.4 kg Colour Black Model number 911002 Units per pallet 4

Read more less

This multipurpose travel topper from Duvalay is used by all as a portable mattress topper, caravan topper, camping topper, and in a huge variety of leisure vehicles such as boats, motorhomes and campervans. • Comes with a zipped, washable protective cover • Highest density (2.5cm) memory foam for maximum comfort • Secures with straps for easy use and storage Innovatively designed to promote a restful nights sleep, this compact topper just rolls out smoothing away all surface lumps and bumps. Brand Duvalay Type Toppers Width 66cm Depth 2.5cm Length 190cm Weight 3kg Colour White Diameter Description 30cm Rolled Up

Read more less

Replacement step motor, swinging motion. Brand Lippert

Read more less

Conversion kit to make either of the following Lippert steps fit onto Fiat Ducato / Peugeot Boxer / Citroen Relay van conversions from 2016 onwards (this kit takes into account the AdBlue water bottle of the vehicle), 27739 / 27741 / 27743. Brand Lippert

Read more less

The AL-KO Premium Jockey Wheel features a 48mm shaft and 230 x 80mm solid rubber wheel and is equipped with an integrated wheel load indicator, eliminating the hassle of using a separate balance to determine the load. From the AL-KO ‘Premium Profi’ product line, this jockey wheel is characterised by trail-blazing design, reliability, high-quality materials and longevity. This model has a stationary nose weight of 300kg (max.) and a maximum nose weight of 180kg when manoeuvring. One standout feature of the Premium Jockey Wheel is its integrated swing arm suspension. This design feature effectively cushions uneven surfaces, such as kerb stones, providing smooth and comfortable towing. To enhance convenience and ease of use, the jockey wheel’s handy integrated wheel load indicator provides accurate and instant feedback, ensuring you stay within the recommended limits effortlessly. The wide, crowned wheel has a modern design and measures 230 x 80mm, offering excellent manoeuvrability. On hard ground, the jockey wheel's small contact area minimizes friction and makes it easy to navigate tight spaces. On soft ground, the large contact area provides stability and prevents sinking, enabling smooth towing over various terrains. Operating the Premium Jockey Wheel is easy thanks to its user-friendly features. The crank is designed to be easily turned, reducing strain and fatigue during height adjustment. Additionally, the built-in thrust bearing under the crank facilitates smooth operation, ensuring seamless height adjustments as needed. The crank itself features an ergonomic shape and can be effortlessly removed for added convenience. The removable wheel allows for easy storage and transport, especially when space is limited. Stationary nose weight: Max. 300kg Nose weight (manoeuvring): 180kg Wheel: 230 x 80mm solid rubber Wheel rim: Steel Extended length: 250mm Weight: 9.8kg Product Code: ALK1221695 Key Features 48mm diameter shaft 230 x 80mm solid rubber wheel with a steel rim Hot-dip galvanised (up to 70 μm) for a high level of corrosion protection 300kg (Max.) Stationary nose weight 180kg (Max.) Manoeuvring nose weight Extended length: 250mm User-friendly integrated wheel load indicator Integrated swing arm suspension cushions uneven surfaces for smooth and comfortable towing Wide, crowned wheel design Ergonomic crank shape: Facilitates effortless height adjustments and can be easily removed The removable wheel allows for easy storage and transport

Read more less

E-bikes are actually too heavy for regular bike carriers. In addition, many bike carriers are mounted on the rear wall of a motorhome, so that you have to lift much too high. Recognizable? The M-Star offers the solution to this problem.With this foldable bike carrier you can transport two electric bikes (up to 75 kg). And it is mounted at knee height. Directly on the chassis, for extra stability. Mounting on chassis The M-Star can be mounted directly on the AL-KO motorhome chassis or a chassis extension. You can contact a Memo dealer in your area for this. The bike carrier is much more stable on the chassis than on the rear wall or on a towbar. E-bikes at knee height Because of the mounting on the chassis, your e-bikes are at knee height. So lifting high is no longer necessary. Remove your bikes from the carrier even more easily? With our optional ramp you can drive your bikes on and off the carrier in no time. Ask your Memo dealer about it. Fasteners Cycling shoes and bicycle arms for transporting bikes or e-bikes are included as standard. For safety, we recommend that you always use a lashing strap. The Memo dealer will be happy to advise you on suitable fasteners for your type of e-bike. European type approval The M-Star has a European type approval. You are guaranteed to be safe on the road. This chassis mounted bicycle carrier can carry up to two E-bikes and is fitted at knee height to avoid having to lift the heavy E-bikes high onto the carrier. This solves most problems for E-bike users and if lifting the E-bikes is not possible at all, a bike ramp is available as an option. The bicycle carrier is easily removable, and it can be folded up as well. Neither action requires tools. This saves space not only on your camp site, but also on the ferry and when it is not being used. Folding the bicycle carrier saves you up to 40 cm of unused space. The M-Star can be fitted onto most motorhomes with either an Al-Ko chassis or suitable chassis extensions. We can supply your motorhome accordingly with either chassis extensions or reinforcement kits to allow the M-Star to be fitted. Thanks to the European type approval no registration or administrative hassle is required. The bike rails, bike holders, cross bar and light bar are constructed from lightweight aluminium. For reasons of durability and strength all other parts are constructed from powder coated steel. • Removable without tools. • Can be fitted in combination with a towbar. For more info please click this link>>PDF Brand Memo Europe Type E-Bike Carriers Width 175cm Depth Open: 300mm, Folded: 150mm Finish Powder coated Weight 25kg Material Steel and Aluminium Colour Black and Silver Capacity Description 75kg   Unsure of Motorhome type please fill out information form 

Read more less