Sigma S34
PLEASE NOTE THE BELOW:
As a insurance requirement a registered Scorpion installer/Dealer has to do the installation. Upon purchase details will be sent to a local installer/dealer in your area installation price dependent on vehicle.
Thatcham Category 2-1 upgrade alarm system, with new radio keys, providing perimeter and ultrasonic interior protection.
Thatcham Category 2 to 1 upgrade alarm system, providing perimeter and ultrasonic interior protection
Supplied with 2 x single button radio keys, self powered siren and tri-coloured status LED
The system has full, in-built, CDL control to power/switch a vehicle’s CDL system
Single immobilisation circuit
Key theft protection facility - only with optional keypad
Auxiliary siren, armed accessory, total closure, interior lamp illumination, headlamp illumination, 2-stage unlock and boot release or remote engine start/stop outputs (separate module required)
Sophisticated programming and diagnostic facility via either the keypad or a CP3 workshop programmer
Security Features
2 x single button radio keys (programmable, water and shock resistant with random 66-bit encryption to prevent scanning and code grabbing. Lost or stolen radio keys can be programmed out)
Perimeter protection circuit for boot and bonnet (negative input)
Perimeter protection circuit for doors (positive or negative input)
Closed loop protection circuit (looped wire to protect accessories, trailers, bike racks etc)
Ignition detection circuit
Ultrasonic interior protection (base sensitivity adjustable, length of disturbance adjustable and automatically adjusts if any movement is detected during the threshold time)
Single immobilisation circuit (18 amp continuous/30 amp max)
Manual arm, using the radio key (or programmable auto arm, which automatically arms the system 60 seconds after the last door is shut - adjustable between 1 and 99 seconds. Auto arm can also be programmed to lock the vehicle if required)
Auto re-arm can be programmed to re-arm the system if a door is not opened within 60 seconds of disarming the system -adjustable between 1 and 99 seconds. Auto re-arm also re-locks the vehicle
A Key theft protection feature can be turned on to prevent the radio keys automatically de-activating the immobilisation when the alarm system is disarmed. In this mode the systems PIN must also be entered into the keypad before the vehicle can be started. This prevents the theft of a vehicle even with the owner’s keys
Last trigger identification via the dashboard LED and a record of the elapsed time since the last trigger can be recalled using the keypad or a CP3 workshop programmer
The total trigger count memory for each individual circuit since the system was installed or the memory re-set is also stored in the system's memory
Additional plug in single stage sensor socket (see optional accessories)
Additional plug in dual stage sensor socket and siren pre-warn facility (see optional accessories)
Secure data linked, self powered siren included
Convenience Features
Full central door locking/unlocking control (with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period)
Armed output (negative 200mA max)
Additional siren/pager output (negative 200mA max)
Total closure output (via holding down the radio key when arming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period – negative 200mA max)
Total open/boot release output (via holding down the radio key when disarming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period – negative 200mA max)
Interior lamp illumination output (negative 200mA max)
Headlamp illumination output (negative 200mA max)
Secure ignition PIN override
Secure PIN override using the keypad
Silent arm and disarm (audible bleeps can be programmed back on, however this will breach current legislation)
The last circuit to trigger can be excluded using the keypad
The vehicle’s battery voltage can be checked using the keypad
The sensors are excludable using the keypad, ignition or remotely with the optional two button radio key
Personal Safety Features
Auto lock can be programmed to lock the vehicle at the start of a journey when the ignition is turned on, and then unlock when the ignition is turned off. This can be excluded on individual occasions
Two stage unlock can be configured to only unlock the driver’s door when the system is disarmed, the remaining doors are only unlocked if the radio key is pressed a second time
Panic feature switched using the radio key and or an optional internal button
S34 Box ContentsS34 alarm ECUECU brackets and fixing screwsS34 alarm installation wiring loom8-wire accessory wiring loomSecure data linked, self powered sirenSiren lead with plug with bonnet switch wireSiren bracket and fixingsTri-colour LED and loomTwo ultrasonic heads, looms and fixingsTwo radio keysOperating instructions and PIN stickersCertificate of installationTwo Sigma window stickersSheet of remaining foil stickers
Optional Accessories
T-TS1
Tilt sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
AS610
Single stage shock sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
AS620
Single zone microwave. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
Dual Stage Sensors
AS625
Dual zone microwave. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
T2SS
Dual stage shock sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
Other
2012054
RF pager
SIGAC22M
2 window closer module
SIGACTBC
Two button radio key conversion kit
Quality and Approvals
Thatcham “Category 2 to 1” approved for passenger cars:
TC2 – 1299/0204
Thatcham “Category L2 to L1” approved for light commercial vehicles:
TUL1-106/0304
EU 95/56 directive (security) and EU 95/54 directive (electrical) – “e” marked: Two year warranty
E1 A-00 0475
Feature table
Feature
S4
S30
S32
S34
Method of Arming
Radio
Radio
OE
Radio
Immobilisation Circuits
1
2
1
1
Key Theft Protection (via Keypad)
Y
Y
Y
Y
Auto-arm Auto-rearm (Passive Arming)
Y
Y
Y
Y
Ignition Detection Circuit (or Internal Panic Button Facility)
Y
Y
Y
Y
Door "+" Protection Circuit
Y
Y
Y
Y
Door "-" Protection Circuit
Y
Y
Y
Y
Combined Boot/Bonnet "-" Protection Circuit
Y
Y
Y
Y
Closed Loop Protection Circuit (or Internal Panic Button Facility)
ACC 8
ACC 8
ACC 8
ACC 8
Ultrasonic Interior Sensors
Y
Y
Y
Y
Additional, Single-stage Sensor Socket
-
Y
Y
Y
Additional, Dual-stage Sensor Socket with Pre-warn Facility
-
Y
Y
Y
Ultrasonic Interior Sensor Disable Facility
Y
Y
Y
Y
Sensor/s Disable Facility:
1= via Keypad (optional)
1
1
1
1
2= via Ign & Radio Key
2
2
2
3= via Ign & Inhibit Input
3
4= remotely via 2 Button Radio Key (optional)
4
4
4
5= remotely via OE repeated arm/disarm
5
Facility to Upgrade to Two-Button Remote
Y
Y
-
Y
In-built Central Door Locking Control (Full)
FULL
FULL
NEG
FULL
Total Closure from Extended CDL Pulse
Y
Y
-
Y
Alarm Armed Output*
ACC 1
ACC 1
ACC 1
ACC 1
Additional Siren / Pager Output**
ACC 2
ACC 2
ACC 2
ACC 2
Total Closure Output*:
ACC 1
ACC 3
-
ACC 3
1= Timed output on every arm.
1 or 2
1 or 2
2= Output whilst button 1 held on arming
2 only
Boot Release / Total Open Output
ACC 2
ACC 4
-
ACC 4
1= Timed output on every arm
1 or 2
1 or 2
2= Output whilst button 1 held on disarming OR
2 only
Remote Engine Start / Stop Output (Additional Module Required)
-
ACC 4
ACC 4
3= When button 1 & 2 held together
or 3
or 3
Interior Light Illumination Output
-
ACC 5
ACC 5
ACC 5
Headlight Illumination Output
-
ACC 6
ACC 6
ACC 6
Second Stage Unlock Output
-
ACC 7
-
ACC 7
Hazard Light Signalling
Y
Y
Y
Y
LED Colour
RED
TRI-COLOUR
TRI-COLOUR
TRI-COLOUR
Trigger Identification Via LED Flash-back
Y
Y
Y
Y
Battery Back-up Data Siren (Thatcham)
-
Y
Y
Y
High-power Audio Siren
Y
-
-
-
External Panic Facility from Remote
Y
Y
-
Y
Ignition Operated PIN Override
Y
Y
Y
Y
Ignition Operated Radio Key Teaching
Y
Y
-
Y
Facility to Connect Keypad
Y
Y
Y
Y
Facility to Connect Keypad / Touch Key Override
Y
Y
Y
Y
*On S4 models only the alarm armed output and the total closure output are mutually exclusive as they both use the acc 1 wire**On S4 models only the aux siren/pager output and the total open/boot release output are mutually exclusive as they both use the acc 2 wire
Avon Leisure batteries make sure there’s power where there are no sockets: whether it’s on the road in a camper van or on a yacht at sea. They can always be relied on to provide the perfect mobile energy supply, when it’s simply not possible or practical to plug into the mains
Other Specifications
Voltage: 12
Ah: 100
Fitments
Ideal solution for caravan boat motorhome or leisure purpose.
Please note: This is not a stock item and will take 21days from date of order to be received
Maxxair - Skymaxx LX Lid Assembly 11-00205I For SkyMaxx LX & Plus
Rooftop air conditioner RTA-2600
Cooling, heating, dehumidification: the Mestic rooftop air conditioner RTA-2600 can do it all! Create the ideal climate in the caravan or motorhome by setting the rooftop air conditioner to a temperature between 16 °C and 30 °C. The built-in air distributor ensures efficient distribution of the airflow.
Rooftop air conditioner for caravans
With the Mestic rooftop air conditioner RTA-2600 you can cool, heat or dehumidify your camping vehicle. This multifunctional air conditioner for motorhomes and caravans has a cooling capacity of 2600 W. Thanks to its power consumption of 1160 W, you can use the air conditioner even on low-fused campsites. Use the included remote control to easily set the rooftop air conditioner to a temperature from 16 °C to 30 °C. The built-in air distributor ensures that the airflow is blown through the entire camping vehicle. The air conditioner also has a dehumidification function. This prevents moisture problems such as a musty smell or condensation. Thanks to the compact size of the rooftop air conditioner, there is enough space left for a solar panel or roof box.
Main benefits
Cools, heats and dehumidifies
Cooling capacity: 2600 W (8870 BTU)
Heating capacity: 2400 W
Adjustable temperature: 16 °C to 30 °C
air distributor and adjustable air vents
Installation dimensions: from 39 x 39 cm or in standard 40 x 40 rooftop
Dimensions: 107.7 x 72 x 28.3 cm (lxwxh)
Air conditioner with night mode and timer function
Are you usually a light sleeper? Then the night mode of the rooftop air conditioner RTA-2600 offers the solution. Even under normal circumstances, the rooftop air conditioner is relatively quiet with a noise level of 53 dB. Thanks to the handy timer function, you can set how long you want to leave the air conditioning on. Are you looking to cool down, but don't want to spend the whole day or night with the air conditioning on? Then select one of the four ventilation modes. And if that's not enough, the rooftop air conditioner even has LED lighting.
Adjust the climate in the camping vehicle to your wishes with the Mestic rooftop air conditioner RTA-2600! From cooling at 16 °C to heating at 30 °C and everything in between. The rooftop air conditioner even has a dehumidifier, air distributor, timer function and more.
Windscreen darkening blind for Fiat Ducato 250/290
This double-pleated windscreen blind was specially designed for Fiat Ducato and similar models, such as the Peugeot Boxer and Citroën Jumper models from July 2006 onwards. Enjoy greater privacy and maintain comfortable temperatures by keeping out heat or cold. The Dometic FP 210 windscreen darkening blind is easy to install and suitable for left- and right-hand-drive vehicles. It also fits the new Fiat Ducato Series 8 models equipped with mechanical or electronic central rear-view mirrors.
Double-pleated honeycomb material for optimised insulation and maximum robustness
Simple, comfortable, stepless handling ensures privacy protection
Effective darkening thanks to 100 % light-tight material
Specially developed for vehicles with central rear mirror
Perfect finish – looks like an integrated solution
Not suitable for vehicles with folding beds, parcel shelves, head-up displays or optionally installed A-pillar airbags
Suitable for vehicles with rain or camera sensor boxes
SKU number
9104124796
Model
FP210
Model on label
FP 210
Scope of delivery
FP210 in box
Product Description
Windscreen darkening blind for Fiat Ducato 250/290
Dimensions product height, [mm]
900
Dimensions product width, [mm]
1616
Dimensions ordered width, [mm]
1616
Dimensions ordered height, [mm]
900
Net weight, [kg]
4.40
Dometic FP210 - Installation and Operating Manual EMEA16
Dometic FP200, FP210, FP220, FP300 - Drill Template
Complete fitting and plumbing kit for 63-litre, 90-litre and 94-litre Underslung Water Tanks for VW Crafter and MAN TGE RWD and 4WD vehicles.
Kit contents:
3 x Underslung Crafter RWD/4WD brackets
6 x M8 x 16mm Socket head screws
15 x 5.5 x 25mm TEK screws
1 x 3/4" x 20mm hosetail
1 x 3/4" x 20mm 90 degree hosetail
1 x 1" x 20mm 90 degree hosetail
1 Roll PTFE tape
Brand
Wydale Plastics
Model
USK90CR4
Country of Origin
United Kingdom
Replacement Wire Rack/Shelf – 3001102 for FO5010 Oven
The 3001102 Wire Rack/Shelf is a genuine replacement part designed specifically for the CAN FO5010 oven. Made from strong, chrome-plated wire, this shelf is built to withstand high cooking temperatures while providing a safe and steady surface inside the oven. Its simple design allows it to slot directly into the oven’s built-in runners, making it quick and easy to install without any tools or adjustments.
This replacement rack is ideal if your original shelf is bent, damaged, or missing. It restores your oven’s full cooking capacity, ensuring that dishes sit level for even cooking and grilling. The open-wire design allows heat to circulate freely around food, improving cooking performance and efficiency.
The 3001102 rack can also be used as an additional shelf, giving you extra space for baking trays, roasting dishes, or cookware when preparing larger meals. Its durable finish is easy to clean, helping you maintain hygiene and keep your oven in good condition.
Whether you’re replacing a worn part or adding more flexibility to your FO5010 oven, the 3001102 Wire Rack/Shelf is a practical and reliable solution that keeps your appliance working at its best.
Fresh design, superior energy efficiency: this smart compressor refrigerator provides an ample 126 l of cool storage. Its elegant frameless door, incorporating a dark silver front panel and a convenient full-width handle, opens to a versatile interior. You can easily remove the 8.2 l freezer compartment to use the full cabinet capacity for refrigeration or deep freezing.
General Features
3-in-1 cooling solution: fridge, freezer, or both at the same time!
Energy-efficient high-end compressor with 3 operating modes (Eco/Boost/Silent)
Frameless door with dark silver front panel and full-width handle
Beveled rear side for maximal utilization of space on board
Reversible door hinge - can be fitted left or right as required
Dual-function locks can also act as vents for your fridge
Standard or flush-mount installation frame available as an accessory.
Specifications
Sku: 9620001482
Model: NRX0130C
Model On Label: NRX0130
Scope Of Delivery: 1 refrigerator, 1 drain elbow, 1 SOM manual, 1 INM manual
Production Description: Compressor-cooled refrigerator, 126 l, dark silver front
Refrigeration Technology: Compressor
Dimensions
Dimension Product Depth: 568mm
Dimension Product Height: 812mm
Dimension Product Width: 525mm
Net Weight 27kg
Total Volume (IEC 62552-3) I
Frozen Volume: EN62552 I: 8.2
Electrical
Input Voltage: 12/24
Rated Input Power (DC) (W)
Performance
Refrigerant Type: R134a
GWP: 1430
Refrigerant Amount: 40
CO2 Equivalent: 0.057
Energy Consumption:(DC@5/25c),(KWH / 24)
Climate Class: (EN2552) T
Logistics
EAN: 7315091485982
Dimension Parcel Depth: 648mm
Dimension Parcel Height: 876mm
Dimension Parcel Width: 638
Parcel Weight: 32
Documents & Download
Dometic NRX0035-0130, NRX1035-1130 - Installation Manual INT(zxx)
Dometic NRX - Short Operating Manual EMEA18
Dometic NRX - Operating Manual EMEA18
Menabo Alcor 2 bike rack designed to attach to the towbar of a vehicle.
Made up of a steel frame with aluminium rails, this rack is capable of carrying up to two bikes with a maximum weight capacity of 60kg.
The anti-theft system enhances the security of both the bike rack and the bikes during transportation and when the rack is not in use.
The bike rack features a tilting system controlled by a pedal. This allows for easy access to the boot of the vehicle without the need to remove the bikes or the entire rack.
The design of the Alcor 2 makes it suitable for accommodating electric bikes (E-bikes) and bikes with wider tires, commonly known as Fat Bikes.
The quick fixing system simplifies the process of attaching and detaching the bike rack to and from the towbar, providing a convenient setup.
Key Features
Designed to attach to the towbar of a vehicle
Steel frame with aluminium rails
Carries up to two bikes
Maximum load capacity of 60kg
Anti-theft system
Pedal-controlled tilting system allowing easy access to the boot
Suitable for electric bikes (E-bikes) and bikes with wider tires (Fat Bikes)
Quick fixing system simplifies attaching and detaching the bike rack
Brand
Menabo
Height Description
604mm
Width
1188mm
Depth
649mm
Weight
15.9kg
Material
Aluminium, Steel
Colour
Black
Maximum Load Description
60kg
Application
Towbars
Capacity Description
2 Bikes
Downloads
Data Sheet Menabo Alcor Bike Rack
The Reich Immersion Pump Power Jet Power Jet is a compact immersion pump providing sufficient water pressure for caravans or motorhomes.
The Power Jet delivers a maximum flow rate of 25 litres per minute and a robust 2.1 bar of water pressure.
With a generous 1-meter cable, this pump is flexible enough to accommodate longer hoses or multiple users at various points of use.
As with other high-performance immersion pumps by Reich, the Power Jet comes equipped with automatic ventilation. This feature guarantees hassle-free operation and peace of mind.
Key Features
Sufficient water supply
1 meter cable
Max 25 l/min
Automatic ventilation
Brand
Reich
Type
Water Pump
Voltage Description
12V DC
Size
Cable length: 1000mm (1m)
The frame of this carrier is made of steel, which is galvanised to prevent rusting. The ramps, light bar and bracket are made of aluminium. The carrier comes as a complete kit, with ramp, Wheel holder etc.
The foldable scooter carrier is versatile and available for the following applications:
• 1 Scooter
• Scooter and bicycles
• Load capacity 150 kg
The Zorro can be mounted directly on "Al-Ko" chassis or a (reinforced) chassis extension.
Dimensions
Chassis width
Max 1420 mm
Light bar width
1950 mm
Rail width
1950 mm
Depth folded up
approx. 35 cm
Depth folded down
approx. 70 cm
Weight
Payload
150 kg
Own weight
40 kg
Materials
Rails and bracket
Aluminium
Construction
Powder coated steel
Lighting and wiring
Lighting
Aluminium light bar with halogen lamps
Optional
LED lighting
Wiring
13-pin Jaeger socket
Please do not order any of these products without first speaking with our Sales Team. We may need to know more about the vehicle’s specific details to ensure compatibility. In some cases additional brackets will need to be purchased. Incorrect fitting without the correct parts could deem your warranty and any subsequent claim invalid.
This wiring kit can be used in conjunction with Memo Towbars and Chassis Mounted Carriers when fitted to Coachbuilt Motorhomes based on a Fiat Ducato, Peugeot Boxer or Citroen Relay, from 2006 onwards.
Brand
Memo Europe
Type
Wiring Kits