Thule Omnistor Awning Crank Handle
The Thule Omnistor Adjustable Wind Out Crank Handle is a must-have accessory for any Thule Omnistor awning. This durable and easy-to-use crank handle makes it quick and easy to extend and retract your awning, even in windy conditions. The handle features an adjustable length of 102 to 155 cm, so you can always find the perfect fit for your needs. It also has a comfortable grip that makes it easy to crank, even when your hands are wet.
Features:
Adjustable length of 102 to 155 cm
Durable construction
Comfortable grip
Easy to use
Benefits:Makes it quick and easy to extend and retract your Thule Omnistor awningComfortable to use, even when your hands are wetDurable construction that will last for years
Compatibility:Thule Omnistor awnings
Product Specifications:Material: AluminumLength: 102 to 155 cmWeight: 0.5 kg
A 92-litre underslung water tank specifically designed for use with Fiat Ducato LWB vehicles (2006 onwards L3 and L4 models, including AdBlue models). The tank is also compatible with Peugeot Boxer and Citroen Relay vans of the same model years and sizes, including left-hand drive variants.
Outlets and vents:
1 x 1/2″ BSP Female outlet
1 x1 1/4″ BSP Female outlet.
1 x 5″ Internal Lid
2 x 1/2″ BSP pre-installed vents
Brand
Wydale Plastics
Type
Medium Profile Water Tanks
Model
T92UBK5
Height Description
195mm
Width
760mm
Depth
890mm
Weight
12kg
Colour
Black
Capacity Description
92 Litres
Country of Origin
United Kingdom
A unique 12V roof air conditioner designed for use in campervans, motorhomes and van conversions up to 6 metres. This air conditioner is ideal for cooling and dehumidifying the sleeping area of a vehicle, rather than the entire vehicle as with traditional AC air conditioning units. It can also be used in the sleeping areas of larger vehicles that do not exceed 9m3 in size.
This Plein-Aircon unit kicks out an impressive 1200W of output and is recommended to use with a minimum of 150AH leisure battery. For those visiting campsites with access to mains power, a 220V Smart Switch can be easily added to this unit (see product code 32602). Once the switch is fitted and the vehicle is plugged into mains, the unit will automatically switch to operating from mains power.
We recommend the user cools the sleeping area of their vehicle with the unit on full power for approximately an hour, then the air conditioner can be turned down to a lower setting to maintain a comfortable sleeping temperature. The unit also has a ventilation mode which enables fresh air to be generated.
The roof-top unit includes all the necessary components for the air conditioning function (the condenser, the evaporator, the hermetic compressor and the fans). It then MUST be combined with an air diffuser (sold separately) which is installed inside the vehicle against the roof.
Diffuser options are as follows:
- Plein-Aircon Basic model: This diffuser features adjustable vents without mood lighting.
- Plein-Aircon Ringlight model: This diffuser features a customisable panel with white or blue LED perimeter lighting. This panel can also be customised with different finishes, fabrics, and stickers to integrate the air conditioner with the vehicle's interior style.
- Plein-Aircon Lightbox model: This diffuser is designed to return natural light from the porthole and radiates and diffuses white or blue light, ideal for night driving.
The latest Plein-Aircon models have been redesigned and manufactured entirely in Italy, with improved efficiency and user-friendliness thanks to the new configuration of the fins. The precision and directional flexibility of the air distribution have been optimised, allowing for even vertical distribution.
The unit can operate in two modes (one of which is optional):
- 12V (standard mode), connected to the service battery. The air conditioner can work if the vehicle is either stationary or moving.
12V and 230V (optional mode), connected to the service battery and to the mains (it requires a230V Smart Switch transformer kit, optional).
The air conditioner can work if the vehicle is either stationary or moving.
One of the notable features of the new Plein-Aircon models is their connectivity. They can be controlled via a smartphone app with dual connectivity via Bluetooth and Wi-Fi.
This app offers various functionalities, including manual operation, as well as Indel B's innovative Pre-Adaptive technology (Smart mode).
This technology adapts the operation of the air conditioner based on the user's habits and optimises performance according to current weather conditions or predicted conditions at a set future destination. Additionally, the app provides diagnostic and service information.
- Compressor: 12V Samsung
- Refrigerant gas: R134A
- Cooling capacity: 1200W to 4100 BTU(max.)
- External roof mounted unit: 246(H) x 670(W) x 800mm(D)
- Roof cut-out dimensions: 400 x 400mm
- Roof thickness: 30 to 70mm
- Weight: 23.1kg
- Air vents: 2 (front and rear)
• Compressor: Direct current single compressor
• Input voltage: 12V DC (Optional 115V-230V Smart Switch power supply)
• Refrigerant gas: R134A
• Cooling capacity: 1200 Watt (max)
• Number of blower speeds: 3 + auto
• Air flow: 350m3/h
• Remote control: Included
• Timer: Yes
• Battery protection: Yes
• Starting current: Very low starting current
• Soft start function: Yes
• Interchangeable internal filters: Yes
• Test marks: E-mark / EMC
Key Features
Cooling and dehumidifying
Ventilation mode
For campervans, motorhomes and van conversions up to 6 meters
Optional 220V Smart Switch can be fitted for use with mains power
Eco Sustainable System - No generator needed
Suitable For
Fiat Ducato,Merc Sprinter,Vw Crafter
Brand
Indel B
Type
Air Conditioners
Voltage Description
12V DC
Height Description
246mm
Width
720mm
Depth
800mm
Thickness
Roof: 30 - 70mm
Weight
25.3kg
Cut Out
400 x 400mm
Wattage
1200w
Application
Motorhomes, Campervans and Van Conversions
Consumption Cooling
16 amp/h (auto) / 42 amp/h (max)
Downloads
Technical Specs Indel B Plein Aircon 12V 32600
The Trauma 33513-26/MIR Gen1 Combi D 6 (E) diesel heater is a warm air heater with an integrated hot water system (10-litre volume).
In heating and hot water mode, the heater can be used to heat the vehicle and heat water up at the same time. If only hot water is required, the user can select the hot water mode.
Operating modes:
- Diesel mode only: for autonomous use
- Electric mode only: With 230V for stationary use
- Mixed mode (diesel and electrical mode): Only possible in heating and hot water mode
• Heating and Hot Water Mode
In heating and hot water mode, the unit automatically selects the required operating level according to the temperature difference between the temperature set on the control panel and the current room temperature.
If the boiler has been filled, the water is automatically heated as well. The water temperature depends on the selected operating mode and the heater output.
All three energy selection options can be used for winter deployment.
- Diesel mode: The unit automatically selects the operating level that is required.
- Electrical mode: In this mode an output of 900 W (3.9 A) or 1800 W (7.8 A) can be manually preselected in accordance with the fuse protection at a campsite.
If more output is required (e.g. heating up or low outside temperatures) diesel or mixed mode should be selected so that enough heating power is always available.
- Mixed mode: In this setting 230V electrical mode is preferred if the power requirement is low (e.g. for maintaining the room temperature). The diesel burner is not enabled until the power requirement is higher, and is the first to switch off when heating is in progress.
• Hot Water Mode (with filled boiler only)
Diesel mode or 230V electrical mode is used to generate hot water. The water temperature can be set to 40 °C or 60 °C.
- Diesel mode: In this setting the water is heated at the lowest burner setting. Once the water temperature has been reached, the burner switches off.
- Electric mode: In this mode an output of 900 W (3.9 A) or 1800 W (7.8 A) can be manually selected in accordance with the fuse protection at the campsite.
- Mixed mode: This mode is not possible. With this setting the unit automatically selects electrical mode. The diesel burner is not enabled.
Please note: The heater requires DIN EN 590 diesel fuel for operation. Operation using bio-diesel (PME, RME or AME) is not permitted.
Product contents:
- Combi D 6 E (33516-78)
- Combi frost control JG assy (36100-52)
- Truma CP Plus Control Panel
- 6 Metre control cable (36110-52)
- Duct kit Combi D 1.0M BPK12 (34502-73)
- Wall Cowl Inner Part (36140-51)
- Cowl outer part black ZR80 (36151-59)
- 4 Metre cable for room sensor (34000-71900)
- Fuel line 5x1.5mm BPK 100M (34020-01315)
- Caravan Heater Pack FTG 820x1070 (358710)
- Caravan Heater Pack Top FTG 580x480x30 (358713)
- Caravan Heater Pack Outer 587x487x440 (358707)
- Energy sources: Diesel as per EN 590
- Rated heat output in gas mode: 2000 W / 4000 W / 6000 W
- Rated heat output in electric mode: 900 W / 1800 W
- Rated heat output in mixed mode: max. 5800 W
- Fuel consumption: 220 - 630 ml/h (110 ml/h with average heat output of 1000 W)
- Air flow rate (free blowing) with 4 warm air outlets: max. 287 m³/h
- Water capacity: 10 litres
- Pump pressure: max. 2.8 bar
- System pressure: max. 4.5 bar
Key Features
Diesel heater with integrated heating elements
Truma CP plus control panel
Powerful fan and even distribution of warm air
Uses little energy
Lightweight and compact allowing for multiple mounting options
Brand
Truma
Type
Air & Water Heaters
Voltage Description
230V AC
Model
Combi D 6 E
Efficiency
Approx. 90%
Height Description
350mm
Width
500mm
Depth
540mm
Weight
18kg
Colour
Black
Flow Rate Description
Air flow: 287 m³/h Max.
Application
Motorhomes
Capacity Description
Water: 10 Litres
Heat Output
6000W
Energy Supply
Diesel as per EN 590
Country of Origin
Germany
Contents
Combi D 6 E, Combi frost control JG assembly, Truma CP Plus Control Panel, 6m control cable, Duct kit Combi D 1.0M BPK12, Wall Cowl Inner Part, Cowl outer part black ZR80, 4m cable for room sensor, Fuel line 5x1.5mm BPK 100M, Caravan Heater Pack FTG 820x1070, Caravan Heater Pack Top FTG 580x480x30, Caravan Heater Pack Outer 587x487x440
Stable, automatic slide-out steps for easy and safe entry to your vehicle.
Features
High performing sliding RV step
Load security - step does not operate with more than 15kg load
Quality parts with proven reliability
Easy to stow manually and without tools in case of power failure
Clever multifunctional cable outlet to avoid water and dust infiltration
Perfect protection against dust thanks to the integrated brushes
Safe entrance thanks to anti slip strips
No sharp edges on the front side
Footboard made of corrugated, anodised aluminium
Strong yet lightweight materials
Different mounting sets for vans available (for 2007 > Ducato/Boxer See G2 Ducato step)
Technical specifications
Compatibility
Vans Motorhomes
Materials
Corrugated anodised aluminium
Step width
400=407mm, 550=552mm, 700=707mm
Total width
400=452mm, 550=597mm, 700=752mm
Operation
12V motor
Weight
400=5.80kg, 550=6.6kg, 700=7.7kg
Accessories
308200 Relay Kit - Auto retract step on ignition turn on
308812 Control Box - Step automatically slides in & out when door is opened
301477 - LED Kit for G2 & V18 slide out step
A compact absorption fridge from Thetford, made up of a 71-litre capacity fridge and 10-litre freezer compartment.
This three-way absorption fridge operates on three different power sources - vehicle battery, gas connection or mains. The fridge automatically selects the best power source available, or alternatively the user can select the desired source using the LED control panel.
Ideal for installation in campervans, motorhomes and caravans, this absorption fridge is designed to accommodate the vehicle’s wheel arch.
This N4080E+ model has a flat framed matt black door (30mm in depth) with left hand hinging, which can easily be converted to the right side if desired. The secure closing door ensures the fridge remains closed when the vehicle is moving.
The fridge features two flexible inner door balconies, two flexible shelves and a salad crisper drawer.
- Control panel: LED
- Dimensions including door: 821(H) x 486(W) x 543mm(D)
- Door shape: Flat framed 30mm
- Door type hinging: Left (but can be converted to right)
- Energy consumption*: 2.6 kWh/24h
- Energy consumption gas*: 270 g/24h
- Energy selection (or power source selection): Automatic
* Average energy consumption at an ambient temperature of 25°C.
Specifications
Brand
Thetford
Model
N4080E+
Type
Absorption Fridges
Height Description
821mm
Width
486mm
Depth
543mm
Weight
22.5kg
Colour
Black
Control
LED Display
Ignition
Battery
Fridge Capacity
71 Litres
Consumption
2.6 kWh/24h
Application
Campervans, Motorhomes, Caravans
Series
N4000
Capacity Description
Gross: 81 Litres
Energy Supply
12V DC, 230V AC, LPG
Gas Consumption
270g/24h
Country of Origin
Netherlands
Secure your cabin doors with a high-quality lock.
Features
Smart solution: it secures the cabin doors from the inside
Clever design: the lock offers a soft touch cover matching the colour of your interior
Fits Fiat Ducato & Ford Transit, and with special adapter it fits MB Sprinter & Renault Master
Made of premium quality powder-coated aluminium
INTRODUCING GASSTOP THE ULTIMATE IN GAS SAFETY
GasStop is an emergency 100% shut-off device for bottled and portable gas systems. In the event of a major leak GasStop will instantly and automatically shut-off the flow of gas. Not only is this device an easy to fit, autonomous must-have safety device, it also has a useful multipurpose gas pressure indicator. Use gas, use GasStop.
Provide a more secure fastening between the awning fabric and the tension or blocker rafter to prevent the unpleasant noise of a flapping awning fabric due to wind
Just click it on the rafter, put the fabric in between and tighten with the handle
Use up to two clamps on one side of the awning
Fits: Oval rafter from G2 Blocker sides, Tension Rafter G2, Support Arms for Thule Omnistor 1200
Content: 2 Clamps
