Recommended products (Seguno)

Perfect bike rack to transport two e-bikes on the A-frame. Features Suitable for normal and short A-frames Ideal for e-bikes with a load capacity up to 60 kg Easy to load thanks to lowered platform Completely tiltable with bikes on for full access to storage space Adjustable tilt-stop system for one hand handling and protection of the car Lockable platform: prevents your bikes from moving during transport, it locks manually Lockable bike holders with a key to secure and lock your bikes on the carrier 2 bikes, not extendable Technical specifications Compatibility Caravans Mounting location Caravan A-Frame Load capacity for bikes 2 Max bike weight 30 kg Max weight capacity 60 kg Total width 130 cm Height 85 cm Depth 49 cm Weight 9.6 kg Please click the link below to vie fitting instructions: Thule caravan superb short FITTING INSTRUCTIONS  

Read more less

Type: 12V Motor vehicle power socketColour: Anthracite with -10A- imprintOperating voltage: 12-Rated current: Max 10ADimensions: 55.5mm x 55.5mmFlat connector size: 6.3mm x 0.8mmFixing: fast on terminals

Read more less

SPECIFICATIONS  SMD-card 12 - 14 Volt (36SMD) Effect 1,2 Watt (36SMD) Light output 115 Lumen (36SMD) Colour 3000 - 3200 Kelvin RA-index 80 Beam spread 120 Degree IP Class - Energy class A Life time 30 000 hours

Read more less

IP55 protection against water & dirt ingress when plug inserted & lid closed Innovative, attractive design High quality for a long reliable life Compact Lightweight Easy to fit - requires 105mm cutter and 4 self tapping screws; easy to attach inlet cable Well styled Ideal For Power tools Electrical appliances up to 13 amp rating Lighting TVs and other leisure products

Read more less

Versatile foot for vehicles with integrated fixed points or flush railings. A kit-based roof rack system. Check the Thule Buyer's Guide to find out which roof rack fits your car Secures to vehicle with Thule One-Key locks (included)

Read more less

Thatcham alarm immobiliser Sigma S30, Category 1 system PLEASE NOTE THE BELOW: As a insurance requirement a registered Scorpion installer/Dealer has to do the installation upon purchase details will be sent to a local installer/dealer in your area. Installation cost is dependent on vehicle, please enquire Providing perimeter and ultrasonic interior protection.  Thatcham Category 1 alarm/immobiliser system, providing perimeter and ultrasonic interior protection Supplied with 2 x single button radio keys, self powered siren, keypad and tri-coloured status LED The system has full, in-built, CDL control to power/switch a vehicle’s CDL system Dual immobilisation circuits Key theft protection facility Auxiliary siren, armed accessory, total closure, interior lamp illumination, headlamp illumination, 2-stage unlock and boot release or remote engine start/stop outputs (separate module required) Sophisticated programming and diagnostic facility via either the keypad or a CP3 workshop programmer Security Features 2 x single button radio keys (programmable, water and shock resistant with random 66-bit encryption to prevent scanning and code grabbing. Lost or stolen radio keys can be programmed out) Perimeter protection circuit for boot and bonnet (negative input) Perimeter protection circuit for doors (positive or negative input) Closed loop protection circuit (looped wire to protect accessories, trailers, bike racks etc) Ignition detection circuit Ultrasonic interior protection (base sensitivity adjustable, length of disturbance adjustable, and automatically adjusts if any movement is detected during the threshold time) 2 x circuit, passively setting, immobilisation (18 amp continuous/30 amp max) Manual arm, using the radio key (or programmable auto arm, which automatically arms the system 60 seconds after the last door is shut – adjustable between 1 and 99 seconds. Auto arm can also be programmed to lock the vehicle if required) Auto re-arm can be programmed to re-arm the system if a door is not opened within 60 seconds of disarming the system -adjustable between 1 and 99 seconds. Auto re-arm also re-locks the vehicle A key theft protection feature can be turned on to prevent the radio keys automatically de-activating the immobilisation when the alarm system is disarmed. In this mode the system’s PIN must also be entered into the keypad before the vehicle can be started. This prevents theft of a vehicle even with the owner’s keys Last trigger identification via the dashboard LED and a record of the elapsed time since the last trigger, can be recalled using the keypad or a CP3 workshop programmer The total trigger count memory for each individual circuit since the was system installed or the memory re-set is also stored in the system’s memory Additional plug in single stage sensor socket (see optional accessories) Additional plug in dual stage sensor socket and siren pre-warn facility (see optional accessories) Secure data linked, self powered siren included Convenience Features Full central door locking/unlocking control (with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period) Armed output (negative 200mA max ) Additional siren/pager output (negative 200mA max) Total closure output (via holding down the radio key when arming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period – negative 200mA max Total open/boot release output (via holding down the radio key when disarming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period – negative 200mA max) Interior lamp illumination output (negative 200mA max) Headlamp illumination output (negative 200mA max) Secure ignition PIN override Secure PIN override using the keypad Silent arm and disarm (audible bleeps can be programmed back on, however this will breach current legislation) The last circuit to trigger can be excluded using the keypad The vehicle’s battery voltage can be checked using the keypad The sensors are excludable using the keypad, ignition or remotely with the optional two button radio key) Personal Safety Features Auto lock can be programmed to lock the vehicle at the start of a journey when the ignition is turned on, and then unlock when the ignition is turned off. This can be excluded on individual occasions Two stage unlock can be configured to only unlock the driver’s door when the system is disarmed, the remaining doors are only unlocked if the radio key is pressed a second time Panic feature switched using the radio key or an optional internal button

Read more less

Description: 100% Brand new, never usedProximity sensor constructed by shaping and sealing the magnetic spring tube connected with wires. Switching action will occur when a magnetic object is in the proximity. It is usually used as a position sensor is widely used in measuring instruments, office automated equipment, household supplies, security and safety equipment, transportation and transportation equipment. Material: ABS & EpoxySimple installation and adjustmentPanel Mount SensorsNo Standby Power RequirementHermetically Sealed design and long life Applications:Position and Limit SensingSecurity System SwitchDoor switch max contact rating: 10wmax switching voltage: 100v DCmax switching current: 0.5Amin breakdown voltage: 200vdcmax carry current: 1.0Amax contact resistance: 100mΩrelease time: 0.4ms maxoperate time: 1.0ms maxDiameter: 5.6mmlength of sensor (not included the cable ): 30mmlength of cable: 50.5cm  Included in the Package:   2 x Proximity switch

Read more less

Installation of the hardwiring cable to your vehicle’s fuse panel enables the built-in Parking Surveillance Mode in your THINKWARE Dash Cam, while you are away from your vehicle. All Thinkware Dashcams can then monitor your vehicles Battery and will shut down if it detects it getting low. Compatible with ALL THINKWARE Dash Cam models except for the M1 Motorsport Cam or F790 Dash Cam Enables parking surveillance mode Wires into permanent Live, Ignition live and earth Fused permanent Live and Ignition live 12V and 24V compatible Supplied with 3 metre long cable Suits all THINKWARE dash cams (excluding M1 & F790 models) We highly recommend having a professional install your dash cam power.

Read more less

Rechargeable flooded lead acid battery. Measurements Width 173mm x Length 260mm x Height 225mm Approx Weight 20.7 kg Other Specifications Voltage: 12 Ah: 70 Measurements Width 173mm x Length 260mm x Height 225mm Approx Weight 20.7 kg Other Specifications Voltage: 12 Ah: 70 Terminal Layout Fitments Ideal for electric fence use. Look at our Solar Range for ways of charging your battery.

Read more less

The CAN 3000430 Glass Lid is a genuine replacement part designed for the CAN FC1343 unit. Built from strong, heat-resistant tempered glass, this lid restores both safety and style to your appliance. Over time, glass lids can become scratched, cracked, or damaged, which affects the usability and appearance of your kitchen setup. Replacing with this authentic CAN part ensures continued reliable performance and a clean, factory-fresh finish. When closed, the glass lid keeps the hob safe from spills, dust, and accidental damage, while also providing a smooth, hygienic surface that doubles as additional worktop space. When open, it remains securely positioned, allowing safe access to the hob beneath. Compact, durable, and practical, this replacement lid is ideal for use in caravans, motorhomes, and boats where maximising space and safety is essential. Key Benefits: Genuine CAN spare part for FC1343 appliances Protects the hob when closed, keeping it clean and safe Provides extra usable workspace in small kitchens Durable tempered glass construction for safety and reliability Restores the original sleek look of your appliance Quick and easy to install with existing hinges Extends the service life of your FC1343 unit

Read more less

Thetford Bowl Cleaner 30911YZ is a fast-acting and effective spray, specially designed for all separation toilets. • Ideal for daily cleaning of dirt and urine scale without using water, ensuring perfect hygiene • Responsible choice: Nature-based formula with natural lactic acid • Fresh Ocean Breeze scent • 500ml • No PCR bottle yet, but due to label material, the empty rinsed bottle can be recycled Pairs perfectly with Thetford's Separation Toilet – Urine Tank Fresh TF-30910YZ and Drying Agent TF-212491 to ensure a thoroughly clean toilet experience wherever you go. Key Features Ideal for daily cleaning of dirt & urine scale, ensuring perfect hygiene Responsible choice: Nature-based formula with natural lactic acid Fresh Ocean Breeze scent 500ml Empty, rinsed bottle can be recycled Specifications Unit of Sale 500ml Brand Thetford Size 500ml Application All seperation toilets Country of Origin Netherlands

Read more less

Designed to enhance your outdoor experience, the Magnetic Drive-Away Kit is an innovative piece of kit that adds convenience and versatility like never before to your Awning set-up.   If you don't have an Awning rail attachment on your vehicle, the Magnetic Drive-Away Kit is the ideal alternative for attaching your Awning tunnel to your vehicle without having a permanent attachment.    Whether you're setting up camp for the weekend or embarking on a cross-country road trip, the Magnetic Drive-Away Kit provides a secure and stable connection, ensuring your awning stays firmly in place, even in windy conditions. Plus, its versatile design allows for quick and easy detachment whenever you're ready to hit the road again.   With the Magnetic Drive-Away Kit, you'll spend less time setting up and more time enjoying the great outdoors. Whether you're lounging in the shade, hosting a barbecue, or simply relaxing with friends and family, this must-have accessory provides the perfect blend of convenience and reliability.   Simply attach the magnetic strip to the top of your vehicle in the desired position, hold the cowl up to the other side of the strip and then thread the 'Figure of 8 Strips' onto the awning tunnel beading. Alternatively, thread the awning tunnel beading to the strip, before attaching to the roof of the vehicle. You can use the four bright guy lines provided to add extra security during windy weather by attaching them to the four loops on the magnetic strip, pegging the two end guy lines alongside your vehicle and then the other two over the top of your vehicle.   Key features of the Magnetic Drive-Away Kit: 1x 270cm magentic strip 4x Glow in the dark plastic pegs 3x Figure of 8 C channels 4x XL Bright guy lines to secure the Magnetic Drive-Away Kit to the side and the top of the vehicle 1x Carry Bag Recommended to use on vehicles of the height range 180cm - 240cm Not suitable for vehicles with roof bars Dimensions/Specifications: Length - 270cm Width - 28cm Depth - 1cm Pack size - 90cm x 25cm x 10cm Weight - 1kg Made from/with: Magnet Plastic Polyester    

Read more less