CTA Mercedes sprinter seat universal seat swivel (works on both passenger and driver's side). For Mercedes sprinter vehicles 2005 onwards.
Brand
CTA
Type
Seat Swivels
Application
Mercedes Benz
CTA are the makers of superb quality seat swivels. Their complete range of seat swivels are crash tested and CE approved. All of the swivels listed below can be fitted on either the passenger or drivers side of the vehicle. All swivels are boxed together with nuts and bolts and fitting instructions. Ford Transit 2004-2010 on universal swivel.
Brand
CTA
Type
Seat Swivels
Application
Ford
CTA are the makers of superb quality seat swivels. Their complete range of seat swivels are crash tested and CE approved. The swivel is universal so can be fitted to the driver side or passenger side of the vehicle. This swivel is for Renault Master vehicles from 2011 to the present day that have electronic handbrake. This swivel measures just 33mm high.
Brand
CTA
Type
Seat Swivels
Application
Renault
Seat swivel plate from CTA that can be fitted on either the passenger or driver side of Volkswagen T5 and T6 vehicles from 2003 to present day. The swivel has a painted black finish and measures 429mm W x 434mm L x 37mm D.
If fitting the swivel to the driver side of a vehicle, please also order adaptor bracket, product code 32864. This Swivel is crash tested and homologated.
Brand
CTA
Type
Seat Swivels
Width
429mm
Depth
37mm
Length
434mm
Finish
Painted
Weight
7kg
Material
Steel
Colour
Black
Application
VW T5 and T6 vehicles from 2003 onward
Downloads
Data Sheet CTA Seat Swivel Plate VW T5 T6 32862
This seat swivel handbrake adaptor kit enables the CTA Seat Swivel Plate VW T5 / T6 (our product code 32862), to be fitted to the driver side of Volkswagen T5 and T6 vehicles from 2003 to present day. The kit matches to that of the seat swivel plate, with a painted black finish.
Brand
CTA
Type
Seat Swivels
Finish
Painted
Material
Steel
Colour
Black
Application
VW T5 and T6 vehicles from 2003 onward
CTA seat swivel plate 9PG0090000V01 is suitable for Ford Transit / Tourneo Custom vans, including: Ford Transit (2014 onwards), Tourneo Custom (2012 - onwards) and Transit Custom vans (2012 - onwards). The swivel plate is made of high strength steel with a black powder coating.
Dimensions
Distance between mounting hole centres: 442mm x 390mm
Brand
CTA
Type
Seat Swivels
Height Description
51mm
Width
474mm
Length
455mm
Finish
Painted
Weight
8.7kg
Material
Powder Coated High Strength Steel
Colour
Black
Application
Ford Tourneo Custom & Transit Custom vehicles from 2012 onward, Ford Transit from 2014 onward
CTA driver seat handbrake adapter 9PG0152600V01 is suitable for CTA driver seat swivel plates (9PG0090000V01) that are used in Ford Tourneo Custom and Transit Custom vans (2012 onwards).
Brand
CTA
Type
Seat Swivels
Application
Ford
Spacer kit for raising seat. CTA spacer kit 9PG0083700V01 is suitable for CTA driver seat swivel plates (9PG0090000V01) that are used in Ford Tourneo Custom and Transit Custom vans (2012 onwards).
Brand
CTA
Type
Seat Swivels
Application
Ford
In the Orion-Tr Isolated DC-DC Chargers the remote on/off circuit is referenced to the primary battery (e.g. starter battery). The Orion-Tr DC-DC Charger Isolated remote cable is intended for applications where the remote on/off signal is referenced to the secondary battery (e.g. lithium battery with BMS).
PRODUCT CODE: ASS070300100
Please Click The Link below to see Additional Information:
Orion-Tr Isolated DC-DC Charger remote cable
One full rated output and one 4 Amp output. Charge voltage can be precisely adjusted to suit any battery system. The input for the charger is 230V at 50/60HZ. Charge voltage can be measured directly on the battery terminals in order to compensate for voltage loss due to cable resistance. An external sensor allows measuring battery temperature and compensating charge voltage accordingly.
Features of the - Victron Skylla-TG Battery Charger 48V-25A
Perfect chargers for any type of battery
Charge voltage can be precisely adjusted to suit any sealed or unsealed battery system. In particular, sealed maintenance free batteries must be charged correctly in order to ensure a long service life. Overvoltage will result in excessive gassing and venting of a sealed battery. The battery will dry out and fail.
Suitable for AC and DC supply (AC-DC and DC-DC operation)
Except for the 3-phase input models, the chargers also accept a DC supply.
Controlled charging
Every TG Charger has a microprocessor, which accurately controls the charging in three steps. The charging process takes place in accordance with the IUoUo characteristic and charges more rapidly than other processes.
Use of TG Chargers as a power supply
As a result of the perfectly stabilized output voltage, a TG Charger can be used as a power supply if batteries or large buffer capacitors are not available.
Two outputs to charge 2 battery banks (24V models only)
The TG Chargers feature 2 isolated outputs. The second output, limited to approximately 4A and with a slightly lower output voltage, is intended to top up a starter battery.
To increase battery life: temperature compensation
Every Skylla TG Charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries which otherwise might be overcharged and dry out due to venting.
Battery voltage sense
In order to compensate for voltage loss due to cable resistance, TG Chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.
PRODUCT CODE: SDTG4800251
For more info please download this link:
Additional Information
The Victron Skylla-TG 24V/80A has one full rated output and one 4 Amp output. Charge voltage can be precisely adjusted to suit any sealed or unsealed battery system. The input for the charger is 230V at 50/60HZ. Charge voltage can be measured directly on the battery terminals in order to compensate for voltage loss due to cable resistance. An external sensor allows measuring battery temperature and compensating charge voltage accordingly.
Features of the - Victron Skylla-TG 24V/80A (1+1) -230V
Perfect chargers for any type of battery
Charge voltage can be precisely adjusted to suit any sealed or unsealed battery system. In particular, sealed maintenance free batteries must be charged correctly in order to ensure a long service life. Overvoltage will result in excessive gassing and venting of a sealed battery. The battery will dry out and fail.
Suitable for AC and DC supply (AC-DC and DC-DC operation)
Except for the 3-phase input models, the chargers also accept a DC supply.
Controlled charging
Every TG Charger has a microprocessor, which accurately controls the charging in three steps. The charging process takes place in accordance with the IUoUo characteristic and charges more rapidly than other processes.
Use of TG Chargers as a power supply
As a result of the perfectly stabilized output voltage, a TG Charger can be used as a power supply if batteries or large buffer capacitors are not available. Two outputs to charge 2 battery banks (24V models only) The TG Chargers feature 2 isolated outputs. The second output, limited to approximately 4A and with a slightly lower output voltage, is intended to top up a starter battery.
To increase battery life: temperature compensation
Every Skylla TG Charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries which otherwise might be overcharged and dry out due to venting.
Battery voltage sense
In order to compensate for voltage loss due to cable resistance, TG Chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.
This collection was generated by the Seguno app for use in email marketing and is not available on any sales channels. By default, it is configured to show your best-selling products that are in stock and not free.
