Recommended products (Seguno)

Berker Double Rocker Switch - Anthracite

Read more less

Thatcham alarm immobiliser Sigma S30, Category 1 system PLEASE NOTE THE BELOW: As a insurance requirement a registered Scorpion installer/Dealer has to do the installation upon purchase details will be sent to a local installer/dealer in your area. Installation cost is dependent on vehicle, please enquire Providing perimeter and ultrasonic interior protection.  Thatcham Category 1 alarm/immobiliser system, providing perimeter and ultrasonic interior protection Supplied with 2 x single button radio keys, self powered siren, keypad and tri-coloured status LED The system has full, in-built, CDL control to power/switch a vehicle’s CDL system Dual immobilisation circuits Key theft protection facility Auxiliary siren, armed accessory, total closure, interior lamp illumination, headlamp illumination, 2-stage unlock and boot release or remote engine start/stop outputs (separate module required) Sophisticated programming and diagnostic facility via either the keypad or a CP3 workshop programmer Security Features 2 x single button radio keys (programmable, water and shock resistant with random 66-bit encryption to prevent scanning and code grabbing. Lost or stolen radio keys can be programmed out) Perimeter protection circuit for boot and bonnet (negative input) Perimeter protection circuit for doors (positive or negative input) Closed loop protection circuit (looped wire to protect accessories, trailers, bike racks etc) Ignition detection circuit Ultrasonic interior protection (base sensitivity adjustable, length of disturbance adjustable, and automatically adjusts if any movement is detected during the threshold time) 2 x circuit, passively setting, immobilisation (18 amp continuous/30 amp max) Manual arm, using the radio key (or programmable auto arm, which automatically arms the system 60 seconds after the last door is shut – adjustable between 1 and 99 seconds. Auto arm can also be programmed to lock the vehicle if required) Auto re-arm can be programmed to re-arm the system if a door is not opened within 60 seconds of disarming the system -adjustable between 1 and 99 seconds. Auto re-arm also re-locks the vehicle A key theft protection feature can be turned on to prevent the radio keys automatically de-activating the immobilisation when the alarm system is disarmed. In this mode the system’s PIN must also be entered into the keypad before the vehicle can be started. This prevents theft of a vehicle even with the owner’s keys Last trigger identification via the dashboard LED and a record of the elapsed time since the last trigger, can be recalled using the keypad or a CP3 workshop programmer The total trigger count memory for each individual circuit since the was system installed or the memory re-set is also stored in the system’s memory Additional plug in single stage sensor socket (see optional accessories) Additional plug in dual stage sensor socket and siren pre-warn facility (see optional accessories) Secure data linked, self powered siren included Convenience Features Full central door locking/unlocking control (with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period) Armed output (negative 200mA max ) Additional siren/pager output (negative 200mA max) Total closure output (via holding down the radio key when arming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period – negative 200mA max Total open/boot release output (via holding down the radio key when disarming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period – negative 200mA max) Interior lamp illumination output (negative 200mA max) Headlamp illumination output (negative 200mA max) Secure ignition PIN override Secure PIN override using the keypad Silent arm and disarm (audible bleeps can be programmed back on, however this will breach current legislation) The last circuit to trigger can be excluded using the keypad The vehicle’s battery voltage can be checked using the keypad The sensors are excludable using the keypad, ignition or remotely with the optional two button radio key) Personal Safety Features Auto lock can be programmed to lock the vehicle at the start of a journey when the ignition is turned on, and then unlock when the ignition is turned off. This can be excluded on individual occasions Two stage unlock can be configured to only unlock the driver’s door when the system is disarmed, the remaining doors are only unlocked if the radio key is pressed a second time Panic feature switched using the radio key or an optional internal button

Read more less

Thule Brake Straps Prevents your bike from moving during travel while blocking the brakes.

Read more less

For locking the Thule HangOn 972/974/9708, Thule RideOn 9502/9503 or Thule EasyBase 949 bike carriers to the tow bar. Technical  Specifications: Model Number  - 957000   Warranty Thule is dedicated to providing exceptional products that are quality tested and guaranteed against defects in materials and workmanship.

Read more less

Robust and functional load stop that keeps the load firmly in place and prevents it from sliding. Features The load-stops are easy to move and adjust according to the load. To be mounted in the top T-track of the Thule Heavy-Duty Bar. Easy-grip lever for the easiest possible adjustment. Fits Thule WingBar Evo  No Fits Thule WingBar Yes Fits Thule SquareBar Evo No Fits Thule ProBar Evo Yes Fits Thule SlideBar Yes Model number 314000 Units per pallet 300

Read more less

The 17cm Standard Spout for Comet Taps is a genuine replacement part made for Comet taps. Strong and reliable, it gives smooth water flow and is simple to replace if your old spout is worn or damaged. With a 17cm length, this spout is the right size for daily use in caravans, motorhomes, boats, and kitchens. Easy to install, it helps restore your tap to full working order quickly. Key Features: 17cm standard spout for Comet taps Genuine replacement part Strong and durable design Smooth and steady water flow Quick and easy to install Great for caravans, motorhomes, boats, and kitchens Technical specifications Brand COMET Product Code PS92422000

Read more less

Thule Elite Van XT is a sturdy, easy-to-use bike rack for vans with a quick installation process that doesn't require any drilling. Smart design makes it easy to load your bikes and with the help of the Thule AcuTight torque limiter, you'll know when the bikes are securely in place. Even with bikes loaded, you can still conveniently open the van doors and at the end of the season, the bike rack is easy to dismount. Model Number: 302018 Quick and easy to install bike rack for your van. Features 2 bikes, not extendable The black version is perfect for vans with a sporty and off-road look No drilling required - the bike rack is clamped and glued onto the vehicle Easy to take off when not in use Distance between rails of 20 cm for a more easy load of the bikes Fast and easy fixation: the wheel holders are adjustable and equipped with pump buckles Lockable bike holders with a key to secure and lock your bikes on the carrier The support frame is adjustable in height The door can be opened without removing the bikes Technical specifications Compatibility Vans Mounting location Rear door Load capacity for bikes 2 Max bike weight 19 kg Max weight capacity 35 kg For e-bikes  -  Sliding rail in depth  -  Sliding rail left-right  -  Lockable platform Manual Lockable bike-to-rack  -  Total width 130 cm Height 125 cm Depth 53 cm Weight 9.5 kg   Please Click The Link Below to View Fitting Instructions: Thule Elite XT Van Bike Rack VW Crafter >2017 INSTRUCTIONS

Read more less

3 x 1.30m Profiles to mount a Quickfit tent on Thule Omnistor 6300/6200/9200.

Read more less

This 13 pin wiring kit can be used in conjunction with Memo Towbars and Chassis Mounted Carriers when fitted to Coachbuilt Motorhomes based on a Fiat Ducato, Peugeot Boxer or Citroen Relay, from 2006 onwards.

Read more less

Rear mounted cargo box for efficient packing and great aerodynamics The cargo solution for your Thule EasyFold 3 With Thule Onto 2 for EasyFold 3, you get lots of loading space with easy access – at the rear of your car! Keep the roof free for maximum mileage or to carry other loads. Or just spare your back from having to lift onto the car roof. This functional 300L cargo box is easily attached to the towbar. PFAS-free water-resistant fabric The Thule Onto 2 features a PFAS-free, water-resistant treatment applied to the ex terior fabric, designed to keep water and dirt from adhering to the surface. To maintain optimal performance, clean the bag gently with mild soap and water—avoid using a high-pressure washer. Allow the bag to dry completely before collapsing it for storage. If the water-resistant properties diminish over time, refresh the surface with a water-resistant spray treatment available at outdoor retailers. Features Additional cargo space Cargo box for the rear of the car, giving the car 300L of easily accessed, extra loading space. Perfect for two golf bags or a Thule Chariot multisport trailer Low mount for easy loading Box sits low to the ground, making it easy to load and unload cargo Easy to mount Easily mounted on the Thule EasyFold 3 bike carrier Boot access Easy boot access since the bike carrier is tiltable Easy to store Easy to store when not in use, thanks to the lightweight and foldable structure Maximise packing space Optimise your packing with the Thule GoPack Backpack set Ready for rough weather PVC material on the inside of the fabric improves water resistance Safe storage Buckles are lockable to protect the gear inside Easy to access gear The design of the front panel allows for partial opening of the box See instructions, saftey and Fit guide down Below:   Technical specifications Volume  270 L Dimensions 139 x 55 x 68 cm Internal dimensions 135 x 45 x 59 cm Weight 11.7 kg One Key System compatible Yes Colour Black Model number 909200   See instructions, safety and Fit guide down Below: Thule Onto 2 instructions Thule onto 2 safety Thule onto 2 Fit Guide  

Read more less

The frame of this Scooter Rack is made of steel, which is galvanised to prevent rusting. The ramps, light bar and bracket are made of aluminium. The carrier comes as a complete kit, with ramp, Wheel holder etc. The foldable scooter carrier is versatile and available for the following applications: • 1 Scooter Rack • Scooter and bicycles • Load capacity 150 kg The Zorro can be mounted directly on "Al-Ko" chassis or a (reinforced) chassis extension. Dimensions Chassis width Max 1420 mm Light bar width 1950 mm Rail width 1950 mm Depth folded up approx. 35 cm Depth folded down approx. 70 cm Weight Payload 150 kg  Own weight 40 kg Materials Rails and bracket Aluminium Construction Powder coated steel Lighting and wiring Lighting Aluminium light bar with halogen lamps Optional LED lighting Wiring 13-pin Jaeger socket    Please do not order any of these products without first speaking with our Sales Team. We may need to know more about the vehicle’s specific details to ensure compatibility. In some cases additional brackets will need to be purchased. Incorrect fitting without the correct parts could deem your warranty and any subsequent claim invalid. Complete form below for product specification for your vehicle!

Read more less

Adapter for the installation of a 4200 awning going on to a VW T5/T6 which has a Multi Rail fitted. SWB = 2.60m awning LWB = 3.00m awning  Please click the PDF link for further information and installation instructions.

Read more less