L26-80 Yuasa Leisure Battery 12v 80Ah
Yuasa Leisureline L26-80 12v 80Ah Leisure battery
YuasaPart Number: L26-80Voltage: 12vAlternative Reference: 678Ampere-Hour Capacity (20hr Rate): 80AhCold Cranking Performance (Amps) SAE/EN1 : 540Reserve Capacity (Minuites) : 135Recommended Charge Rate (Amps) : 4Dimensions (L x W x H) : 260 x 174 x 235Mean Weight With Acid (Kg) : 19Handels : YESEnd Venting: YES
LeisureLine
Yuasa LeisureLine are designed for leisure applications including caravans and marine use. They can be relied on to provide the maximum number of cycles when it’s not possible or practical to plug in to the mains.
Key BenefitsIdeal for caravans and leisure useMaximum safety protection and venting
Ultimate PerformanceThe Leisureline battery has been developed especially for the European Leisure market. Yuasa has many years experience with leisure batteries and has used its extensive understanding of the market to design a battery that can meet the unique needs and requirements of its customers.
Sigma S32
The Sigma S Series is designed to work independently as a full remote control system linked to the vehicle’s central door locking, or to interface with the manufacturer’s pre-installed remote locking system. All models are manufactured to the highest European certification standards, including Thatcham approval for the appropriate insurance-approved systems.
Utilising the original equipment radio keys, providing perimeter and ultrasonic interior protection
Thatcham Category 2 to 1 upgrade alarm system, providing perimeter and ultrasonic interior protection
Switched from vehicle’s existing OE remote controls
Supplied with self powered siren, and tri-coloured status LED
The system has negative lock/unlock outputs to switch negative controlled CDL systems
Single immobilisation circuit
Key theft protection facility – only with the optional keypad
Auxiliary siren, armed accessory, interior lamp illumination and headlamp illumination outputs
Sophisticated programming and diagnostic facility via the keypad
Security Features
Switches securely from the vehicle’s existing OE remote
Perimeter protection circuit for boot and bonnet (negative input)
Perimeter protection circuit for doors (positive or negative input)
Closed loop protection circuit (looped wire to protect accessories, trailers, bike racks etc)
Ignition detection circuit
Ultrasonic interior protection (base sensitivity adjustable, length of disturbance adjustable, and automatically adjusts if any movement is detected during the threshold time)
Single immobilisation circuit (18 amp continuous/30 amp max)
Manual arm, using the vehicle’s existing OE remote (or programmable auto arm, which automatically arms the system 60 seconds after the last door is shut – adjustable between 1 and 99 seconds. Auto arm can also be programmed to lock the vehicle if required)
Auto re-arm can be programmed to re-arm the system if a door is not opened within 60 seconds of disarming the system -adjustable between 1 and 99 seconds. Auto re-arm also re-locks the vehicle
Key theft protection feature can be turned on to prevent the OE radio keys automatically de-activating the immobilisation when the alarm system is disarmed. In this mode the system’s PIN must also be entered into the keypad before the vehicle can be started. This prevents theft of a vehicle even with the owner’s keys
Last trigger identification via the dashboard LED and a record of the elapsed time since the last trigger, can be recalled using the keypad
The total trigger count memory for each individual circuit since the system was installed or the memory re-set is also stored in the system’s memory
Additional plug in single stage sensor socket (see optional accessories)
Additional plug in dual stage sensor socket and siren pre-warn facility (see optional accessories)
Secure data linked, self powered siren included
Convenience Features
Negative door locking/unlocking control (with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period)
Armed output (negative 200mA max )
Additional siren/pager output (negative 200mA max)
Interior lamp illumination output (negative 200mA max)
Headlamp illumination output (negative 200mA max)
Secure ignition PIN override
Secure PIN override using the keypad
Silent arm and disarm (audible bleeps can be programmed back on, however this will breach current legislation)
The last circuit to trigger can be excluded using the keypad
The vehicle’s battery voltage can be checked using the keypad
The sensors are excludable using the keypad or repeated arming
Personal Safety Features
Auto lock can be programmed to lock the vehicle at the start of a journey when the ignition is turned on, and then unlock when the ignition is turned off. This can be excluded on individual occasions
Optional Accessories
Single Stage Sensors
T-TS1
Tilt sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
AS610
Single stage shock sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
AS620
Single zone microwave. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
Dual Stage Sensors
AS625
Dual zone microwave. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
T2SS
Dual stage shock sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
Other
2012054
RF pager
As a insurance requirement a registered Scorpion installer/Dealer has to do the installation upon purchase details will be sent to a local installer/dealer in your area installation costs depends on vehicle just enquire.
Adapter Set For Merc Sprinter 2007 - VW Crafter 2007-16 OE Track.
Compatible With The Omnitor 6300 / 6200
Please click the PDF link for More info and installation instructions.
Telescopic ladder for easy access to roof-mounted accessories - safely installed using fixation kit.
Features
Fixation Kit & Storage bag included
Easily fixed to the vehicle wall with extra stability thanks to the included magnetic fixation kit (must fit to steel surface)
Easy to use anywhere you want
Safe and stable on most terrains
Ladder is extendable to 2.60 m
Open partly for lower reach
Air pressure system for safe closing
Complies with EN-131
Maximum weight support of 150 kg
Technical specifications
Compatibility
Vans & Minivans
Length
49 cm
Width
7 cm
Height
75 cm
Weight
8.1 kg
Extra fixation kits available separately
Fresh water diaphragm pump from Shurflo, with redesigned 4 chamber head, fully adjustable sealed pressure switch and heavy duty sealed motor. Built in check-valve, self primes (up to 6 feet), will run dry without damage. Ignition and thermal protection. Heavy duty design provides smoother flow due to 4 chamber head.
• 11.4lpm, 30psi
Maximum Recommended Head
1.8 Metres
Replaces
509506 Shurflo Aqua King Pump, 509404 Flojet R2100 Pressure Pump. Closest alternative for pressure pumps: 509663 - Shurflo 2852, 509682 - Shurflo 2858, 509506 - Floking 3000 pump & 509406 - Flojet R4305.
Self Primes up to
1.82 Metres (6 Feet)
Inlet Outlet
1/2"-14 NPSM Male (13mm)
Brand
SHURflo
Type
Fresh Water Pumps
Voltage Description
12V DC
Model
4139-111
Height Description
104mm (4.1")
Width
124mm (4.9")
Length
208mm (8.2")
Material
Polypro Housings, EPDM Valves / Seals, Santoprene Draphragm, Stainless Steel Hardware
Fuse
7.5A Recommended
Flow Rate Description
11.35 LPM (3.0 GPM)
Approvals
Ignition Protection 8846, CE, IMCI Certified
Consumption
6.5 a
Series
Aqua King II Standard
Amps Description
Maximum: 6.5A
Connections Description
13mm (1/2") ID Hose or 15mm push fit
Cut Out Pressure Description
30 PSI / 2 Bar
Warranty
3 Years
Downloads
Shurflo AquaKing 2 4139 111 B54
Adapter for the installation of a 4200 awning going on to a VW T5/T6 which has a Reimo Multi Rail fitted.
Adapter for the installation of a 4200 awning going on to a VW T5/T6 which has a Reimo Multi Rail fitted
Rain Gutter included
SWB = 2.60m awning
LWB = 3.00m awning
Please click the PDF link for further information and installation instructions.
The AL-KO Premium Jockey Wheel features a 48mm shaft and 230 x 80mm solid rubber wheel and is equipped with an integrated wheel load indicator, eliminating the hassle of using a separate balance to determine the load.
From the AL-KO ‘Premium Profi’ product line, this jockey wheel is characterised by trail-blazing design, reliability, high-quality materials and longevity.
This model has a stationary nose weight of 300kg (max.) and a maximum nose weight of 180kg when manoeuvring.
One standout feature of the Premium Jockey Wheel is its integrated swing arm suspension. This design feature effectively cushions uneven surfaces, such as kerb stones, providing smooth and comfortable towing.
To enhance convenience and ease of use, the jockey wheel’s handy integrated wheel load indicator provides accurate and instant feedback, ensuring you stay within the recommended limits effortlessly.
The wide, crowned wheel has a modern design and measures 230 x 80mm, offering excellent manoeuvrability. On hard ground, the jockey wheel's small contact area minimizes friction and makes it easy to navigate tight spaces. On soft ground, the large contact area provides stability and prevents sinking, enabling smooth towing over various terrains.
Operating the Premium Jockey Wheel is easy thanks to its user-friendly features. The crank is designed to be easily turned, reducing strain and fatigue during height adjustment.
Additionally, the built-in thrust bearing under the crank facilitates smooth operation, ensuring seamless height adjustments as needed. The crank itself features an ergonomic shape and can be effortlessly removed for added convenience.
The removable wheel allows for easy storage and transport, especially when space is limited.
Stationary nose weight: Max. 300kg
Nose weight (manoeuvring): 180kg
Wheel: 230 x 80mm solid rubber
Wheel rim: Steel
Extended length: 250mm
Weight: 9.8kg
Product Code: ALK1221695
Key Features
48mm diameter shaft
230 x 80mm solid rubber wheel with a steel rim
Hot-dip galvanised (up to 70 μm) for a high level of corrosion protection
300kg (Max.) Stationary nose weight
180kg (Max.) Manoeuvring nose weight
Extended length: 250mm
User-friendly integrated wheel load indicator
Integrated swing arm suspension cushions uneven surfaces for smooth and comfortable towing
Wide, crowned wheel design
Ergonomic crank shape: Facilitates effortless height adjustments and can be easily removed
The removable wheel allows for easy storage and transport
Vision Vent roof lights are designed with covered ventilation, air cushions to prevent dripping and channels for drainage, condensation is minimised even in unfavourable weather and intensive use of the camper van interior. The aerodynamic design makes travelling more pleasant through lower driving noise and less draught.
Recommended max speed: 80mph / 130 km/h
Key Features
Large dome for rain protection
High UV protection due to tinted dome material
Telescopic display unit, tiltable on four sides, with locking device
Modern interior frame with double pleated blind
Light Colour
White
Brand
MPK
Type
Roof Vent
Height Description
Above roof: 80 mm
Width
Frame: 340mm, Dome: 380mm
Depth
Frame: 365mm, Dome: 395mm
Thickness
Roof: 42-72 mm
Cut Out
280 x 280 mm
Coverage
75cm Squared
Downloads
Visionvent S pro installation
BLACK CAPRI MIXER WITH PULLOUT SHOWERHEAD
RETRACTABLE SHOWERHEAD (HOSE LENGTH 1.5M), WITH MICROSWITCH
MOUNTING HOLE: 33MM DIA
HEIGHT: 140MM
OUTLET LENGTH: 140 MM
HEIGHT UNDER OUTLET: 88 MM
SUPPLIED WITH 30CM FLEX HOSES WITH JG 12MM FEMALE FITTING
RETAIL PACKED - COMES WITH ALTERNATIVE FITTING