Fitting kit for use when combining both the 62-litre and 92-litre Underslung Water Tanks for Ducato L3/L4 LWB vehicles.
Kit contents:
20x M8 x 16mm A2 stainless steel bolts
36x Corrosion resistant Tek screws with sealing washers
2x Small brackets
2x Medium brackets
2x Z Brackets
Brand
Wydale Plastics
Model
USKTDC
Height Description
90mm
Width
225mm
Depth
110mm
Weight
2.3kg
Country of Origin
United Kingdom
Submersible pump fitting kit suitable for our 24, 57 and 100 litre Wheel Arch Water Tanks.
Kit contents:
1 x 1/2” BSP 90° bulkhead hose tail 11-13mm
1 x 1/2” BSP back nut
1 x 1/2” BSP gasket
1 x Cable gland
1 x 10 metre roll PTFE tape
Brand
Wydale Plastics
Model
WAKS1
Country of Origin
United Kingdom
Flat 60-litre water tank for storing and transporting water as well as various other liquids.
The flat design makes it more stable and easier to store in certain spaces compared to cylindrical tanks.
The tank's semi-translucent finish allows you to see the liquid level inside the tank.
It comes with a 5-inch plain cap which does not allow air to enter or escape, making it suitable for certain types of liquid storage where exposure to air is undesirable.
The tank is equipped with a 3/4-inch BSP (British Standard Pipe) outlet, which is a standard type of threading for pipe connections, ensuring compatibility with a variety of fittings and fixtures.
Brand
Wydale Plastics
Type
Medium Profile Water Tanks
Model
T60FNA5
Height Description
250mm
Width
350mm
Depth
800mm
Weight
5.5kg
Colour
Transparent
Outlet
3/4" BSP
Capacity Description
60 Litres
Country of Origin
United Kingdom
Downloads
Dimensional Drawing T60FNA5
Avon Leisure batteries make sure there’s power where there are no sockets: whether it’s on the road in a camper van or on a yacht at sea. They can always be relied on to provide the perfect mobile energy supply, when it’s simply not possible or practical to plug into the mains
Other Specifications
Voltage: 12
Ah: 100
Fitments
Ideal solution for caravan boat motorhome or leisure purpose.
Sigma S4
A Non-Thatcham alarm & immobiliser system, providing perimeter and ultrasonic interior protection.
PLEASE NOTE THE BELOW:
As a insurance requirement a registered Scorpion installer/Dealer has to do the installation upon purchase details will be sent to a local installer/dealer in your area
A modular alarm system, providing perimeter and ultrasonic interior protection
Supplied with 2 x single button radio keys, high power audio siren and red status LED
The system has full, in-built, CDL control to power/switch a vehicle’s CDL system
Single immobilisation circuit
Key theft protection facility - only with an optional keypad
Auxiliary siren or boot release output & armed accessory or total closure output
Sophisticated programming and diagnostic facility via either the keypad or the CP3 workshop programmer
Security Features
2 x single button radio keys (programmable, water and shock resistant with random 66-bit encryption to prevent scanning and code grabbing. Lost or stolen radio keys can be programmed out)
Perimeter protection circuit for boot and bonnet (negative input)
Perimeter protection circuit for doors (negative input)
Closed loop protection circuit (looped wire to protect accessories, trailers, bike racks etc)
Ignition detection circuit
Ultrasonic interior protection (base sensitivity adjustable, length of disturbance adjustable and automatically adjust if any movement is detected during the threshold time)
Single immobilisation circuit (18 amp continuous/30 amp max)
Manual arm, using the radio key (or programmable auto arm, which automatically arms the system 60 seconds after the last door is shut - adjustable between 1 and 99 seconds. Auto arm can also be programmed to lock the vehicle if required)
Auto re-arm can be programmed to re-arm the system if a door is not opened within 60 seconds of disarming the system -adjustable between 1 and 99 seconds. Auto re-arm also re-locks the vehicle
A Key theft protection feature can be turned on to prevent the radio keys automatically de-activating the immobiliser when the alarm system is disarmed. In this mode the system's PIN must also be entered into the keypad before the vehicle can be started. This prevents the theft of a vehicle even with the owner’s keys
Last trigger identification via the dashboard LED and a record of the elapsed time since the last trigger can be recalled using the keypad or a CP3 workshop programmer
The total trigger count memory for each individual circuit since the system was installed or the memory re-set is also stored in the system's memory
Convenience Features
Full central door locking/unlocking control (with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period)
Armed output (negative 200mA max) or this can alternatively be used as a total closure output (either via holding down the radio key when arming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period)
Additional siren/pager output (negative 200mA max) or alternatively this can be used as a total open/boot release output (either via holding down the radio key when disarming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period
Secure ignition PIN override
Secure PIN override using the keypad
Silent arm and disarm (audible bleeps can be programmed back on, however this will breach current legislation)
The last circuit to trigger can be excluded using the keypad
The vehicle’s battery voltage can be checked using the keypad
The sensors are excludable using the keypad, ignition or remotely with the optional two button radio key
Personal Safety Features
Auto lock can be programmed to lock the vehicle at the start of a journey when the ignition is turned on, and then unlock when the ignition is turned off. This can be excluded on individual occasions
Panic feature switched using the radio key and or an optional internal button
S4 Box ContentsS4 alarm ECUECU brackets and fixing screwsS4 alarm installation wiring loom3-wire accessory wiring loomSiren with cable incorporating bonnet switch wireSiren bracket and fixingsRed LED and loomTwo ultrasonic heads, looms and fixingsTwo radio keysOperating instructions and PIN stickersCertificate of installationTwo Sigma window stickersSheet of remaining foil stickers
Optional Accessories
2012054
RF Pager
SIGAC22M
2 window closer module
SIGACTBC
two button Radio Key conversion kit
Quality and Approvals
EU 95/56 directive (security) and EU 95/54 directive (electrical) – “e” marked: Two year warranty
E1 A-00 0474
Support
http://www.scorpionauto.com/PDF/S4.pdf
Feature table
Feature
S4
S30
S32
S34
Method of Arming
Radio
Radio
OE
Radio
Immobilisation Circuits
1
2
1
1
Key Theft Protection (via Keypad)
Y
Y
Y
Y
Auto-arm Auto-rearm (Passive Arming)
Y
Y
Y
Y
Ignition Detection Circuit (or Internal Panic Button Facility)
Y
Y
Y
Y
Door "+" Protection Circuit
Y
Y
Y
Y
Door "-" Protection Circuit
Y
Y
Y
Y
Combined Boot/Bonnet "-" Protection Circuit
Y
Y
Y
Y
Closed Loop Protection Circuit (or Internal Panic Button Facility)
ACC 8
ACC 8
ACC 8
ACC 8
Ultrasonic Interior Sensors
Y
Y
Y
Y
Additional, Single-stage Sensor Socket
-
Y
Y
Y
Additional, Dual-stage Sensor Socket with Pre-warn Facility
-
Y
Y
Y
Ultrasonic Interior Sensor Disable Facility
Y
Y
Y
Y
Sensor/s Disable Facility:
1= via Keypad (optional)
1
1
1
1
2= via Ign & Radio Key
2
2
2
3= via Ign & Inhibit Input
3
4= remotely via 2 Button Radio Key (optional)
4
4
4
5= remotely via OE repeated arm/disarm
5
Facility to Upgrade to Two-Button Remote
Y
Y
-
Y
In-built Central Door Locking Control (Full)
FULL
FULL
NEG
FULL
Total Closure from Extended CDL Pulse
Y
Y
-
Y
Alarm Armed Output*
ACC 1
ACC 1
ACC 1
ACC 1
Additional Siren / Pager Output**
ACC 2
ACC 2
ACC 2
ACC 2
Total Closure Output*:
ACC 1
ACC 3
-
ACC 3
1= Timed output on every arm.
1 or 2
1 or 2
2= Output whilst button 1 held on arming
2 only
Boot Release / Total Open Output
ACC 2
ACC 4
-
ACC 4
1= Timed output on every arm
1 or 2
1 or 2
2= Output whilst button 1 held on disarming OR
2 only
Remote Engine Start / Stop Output (Additional Module Required)
-
ACC 4
ACC 4
3= When button 1 & 2 held together
or 3
or 3
Interior Light Illumination Output
-
ACC 5
ACC 5
ACC 5
Headlight Illumination Output
-
ACC 6
ACC 6
ACC 6
Second Stage Unlock Output
-
ACC 7
-
ACC 7
Hazard Light Signalling
Y
Y
Y
Y
LED Colour
RED
TRI-COLOUR
TRI-COLOUR
TRI-COLOUR
Trigger Identification Via LED Flash-back
Y
Y
Y
Y
Battery Back-up Data Siren (Thatcham)
-
Y
Y
Y
High-power Audio Siren
Y
-
-
-
External Panic Facility from Remote
Y
Y
-
Y
Ignition Operated PIN Override
Y
Y
Y
Y
Ignition Operated Radio Key Teaching
Y
Y
-
Y
Facility to Connect Keypad
Y
Y
Y
Y
Facility to Connect Keypad / Touch Key Override
Y
Y
Y
Y
*On S4 models only the alarm armed output and the total closure output are mutually exclusive as they both use the acc 1 wire**On S4 models only the aux siren/pager output and the total open/boot release output are mutually exclusive as they both use the acc 2 wire
Fresh water diaphragm pump from Shurflo, with redesigned 4 chamber head, fully adjustable sealed pressure switch and heavy duty sealed motor. Built in check-valve, self primes (up to 6 feet), will run dry without damage. Ignition and thermal protection. Heavy duty design provides smoother flow due to 4 chamber head.
• 11.4lpm, 30psi
Maximum Recommended Head
1.8 Metres
Replaces
509506 Shurflo Aqua King Pump, 509404 Flojet R2100 Pressure Pump. Closest alternative for pressure pumps: 509663 - Shurflo 2852, 509682 - Shurflo 2858, 509506 - Floking 3000 pump & 509406 - Flojet R4305.
Self Primes up to
1.82 Metres (6 Feet)
Inlet Outlet
1/2"-14 NPSM Male (13mm)
Brand
SHURflo
Type
Fresh Water Pumps
Voltage Description
12V DC
Model
4139-111
Height Description
104mm (4.1")
Width
124mm (4.9")
Length
208mm (8.2")
Material
Polypro Housings, EPDM Valves / Seals, Santoprene Draphragm, Stainless Steel Hardware
Fuse
7.5A Recommended
Flow Rate Description
11.35 LPM (3.0 GPM)
Approvals
Ignition Protection 8846, CE, IMCI Certified
Consumption
6.5 a
Series
Aqua King II Standard
Amps Description
Maximum: 6.5A
Connections Description
13mm (1/2") ID Hose or 15mm push fit
Cut Out Pressure Description
30 PSI / 2 Bar
Warranty
3 Years
Downloads
Shurflo AquaKing 2 4139 111 B54
Various kits available
When ordering 301877, please note this must be used with G2 DUCATO step.
Not compatible with G2 standard or G2 Crafter step.
When ordering 301878 & 301879, please note these must be used with G2 CRAFTER step.
Not compatible with G2 standard or G2 Ducato stepWhen ordering 301885, please note this must be used with G2 CRAFTER step 301845.
Not compatible with G2 standard or G2 Ducato step 301880, 301881, 301882, 301883, 301898 & 301899 all compatible with G2 Standard step.
Not compatible with G2 Ducato or G2 Crafter steps
Please note no kits are compatible with Manual slide Out step.
Made from lightweight yet durable aluminium, this innovative folding table leg compacts down to a single fold leg thickness, ideal if space is minimal. This 660 or 700mm tall lockable folding table leg provides a stable base for any free standing table top. Can be used singularly for dinette, or as a pair for a free standing table!
The Dinky Duvalay sleeping bag is made from a luxury polycotton cover with an animal print finish and is ideally suited for children aged from two to eight years old.
The bag has two pockets - the top pocket contains a duvet, while the bottom pocket houses a 2.5cm memory foam topper with a water-resistant toweling cover which is easy to remove.
Using the Dinky Duvalay is incredibly easy, simply undo the buckled straps, and unroll the sleeping bag, and it's ready to use in any sleeping area.
It can help prevent children from falling out of bed and keep them snug throughout the night by eliminating the chance of kicking off the duvet. It can also help to make the progression from a cot to a full-size bed much smoother.
The award-winning sleeping bag has been recognized for its exceptional features and holds UK (1843682), European, and American patents.
Dimensions:
Gold memory foam: 140cm x 66cm x 2.5cm, 3.6kg (approx.)
Pillow: 45cm x 30cm, 0.6kg (approx.)
Washing instructions:
Polycotton cover:
40-degree wash
No bleaching
Iron at low temperature
Can be tumble-dried
Duvet (Hollow fibre):
40-degree wash
No bleaching
No Ironing
No dry cleaning
Key Features
Duvet, 2.5cm memory foam topper and pillowcase included
Luxury polycotton cover with animal print finish
Suitable for children aged 2 to 8 years old
Award-winning design with UK, European, and American patents
Dimensions: Topper: 140cm x 66cm x 2.5cm, Pillow: 45cm x 30cm
Product Code:40033
Floor plate or hold down bracket for the Thetford Porta Potti Excellence model. This plate secures any Excellence toilet to the floor and enables easy detachment with one simple release action for emptying and maintenance.
Brand
Thetford
Type
Brackets and Fixings
Application
Porta Potti
