With Bluetooth built-in, the BMV Smart is Internet ready. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance.
Description
With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance.
Bluetooth inside
With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance.
Download the Victron Bluetooth app
Use a smartphone or other Bluetooth enabled device to
Customize settings
Monitor all important data on single screen
View historical data
Update the software when new features become available
Easy to install
All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ12 cable (10 m) and battery cable with fuse (2 m); no other components needed.
Also included are a separate front bezel for a square or round display appearance, a securing ring for rear mounting and screws for front mounting.
Midpoint voltage monitoring
One bad cell or one bad battery can destroy a large, expensive battery bank. When batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. Please see the BMV manual, section 5.2, for more information. We recommend our Battery Balancer (BMS012201000) to maximize service life of series-connected lead-acid batteries.
Very low current draw from the battery
Current consumption: 0.7Ah per month (1mA) @12V and 0.6Ah per month (0.8mA) @ 24V Especially Li-ion batteries have virtually no capacity left when discharged until low voltage shutdown. After shutdown due to low cell voltage, the capacity reserve of a Li-ion battery is approximately 1Ah per 100Ah battery capacity. The battery will be damaged if the remaining capacity reserve is drawn from the battery. A residual current of 10mA for example may damage a 200Ah battery if the system is left in discharged state during more than 8 days.
Bi-stable alarm relay
Prevents increased current draw in case of an alarm.
Other features
Battery voltage, current, power, ampere-hours consumed and state of charge
Remaining time at the current rate of discharge
Programmable visual and audible alarm
Programmable relay, to turn off non critical loads or to run a generator when needed
500 Amp quick connect shunt and connection kit
Shunt selection capability up to 10,000 Amps
Direct communication port
Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health
Wide input voltage range: 6.5 – 70V
High current measurement resolution: 10 mA (0.01A)
Additional input to measure voltage (of a second battery), temperature or midpoint voltage, and corresponding alarm and relay settings
Pdf
The BMV-700 is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.
Description
The remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account. Next to the basic display options, such as voltage, current and ampere-hours consumed, the BMV-700 series also displays state of charge, time to go, and power consumption in Watts.
Features of the - Victron Energy BMV-700 Battery Monitor
Battery voltage, current, power, ampere-hours consumed and state of charge
Remaining time at the current rate of discharge
Programmable visual and audible alarm
Programmable relay, to turn off non critical loads or to run a generator when needed
500 Amp quick connect shunt and connection kit
Shunt selection capability up to 10.000 Amps
VE.Direct communication port
Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health
Wide input voltage range: 6,5 – 95V
High current measurement resolution: 10 mA (0,01A)
Low current consumption: 2,9Ah per month (4mA) @12V and 2,2Ah per month (3mA) @ 24V
Bluetooth Smart - Use an optional Bluetooth Smart dongle to monitor your batteries on Apple or Android smartphones, tablets, macbooks and other devices.
Pdf
Truma gas pressure regulator with crash sensor for one cylinder. The new generation of MonoControl CS safety gas pressure regulators is suitable for one gas cylinder. The integrated crash sensor stops the flow of gas immediately in the event of an accident. This prevents gas escaping if the gas installation is damaged. 40% less weight than the previous model. User friendly - if the crash sensor is triggered, this can be seen on the yellow button; simply press the reset button on the device. (52412-01).
Technical data:
Propane/Butane
Regulator capacity: max. 1.5 kg/h.
Regulator inlet: Male thread M20 x 1.5 (G.13)
Regulator outlet: Olive screw connection 10 or 8mm (H.9)
Crash sensor triggering value: 3.5g +/- 0.5g
Dimensions: 106 x 101 x 102mm (H x W x D)
Weight: 500g.
PLEASE NOTE: Gas appliances should only be installed by a Gas Safe registered installer and in accordance with the manufacturers' instructions.
Brand
Truma
Type
Gas Regulators
Height Description
106mm
Width
101mm
Depth
102mm (4")
Weight
500g
Flow Rate Description
1.5 kg/h
Inlet Pressure
0.3 to 16 bar
Outlet Pressure
30 mbar
Inlet Connection
M20
Outlet Connection
10mm or 8mm
Fuel
LPG
Very well priced combination blind and fly-screens in Grey. With these blind the user has the ability to completely black out the vehicle or to just partially allow light in, all the time being totally protected against insects. The blind are fitted as standard by many European motorhome manufacturers. It is possible to trim the height of these blind. 1400mm x 650mm (L = 1476mm x H 650mm). This Blind does not come with end caps.
Brand
NRF
Application
Universal
Very well priced combination blind and fly-screens in Grey. With these blind the user has the ability to completely black out the vehicle or to just partially allow light in, all the time being totally protected against insects. The blind are fitted as standard by many European motorhome manufacturers. It is possible to trim the height of these blind. 1450mm x 650mm (L = 1526mm x H 650mm). This Blind does not come with end caps.
Brand
NRF
Application
Universal
Very well priced combination blind and fly-screens in Grey. With these blind the user has the ability to completely black out the vehicle or to just partially allow light in, all the time being totally protected against insects. The blind are fitted as standard by many European motorhome manufacturers. It is possible to trim the height of these blind. 1600mm x 650mm (L = 1600mm x H 650mm). This Blind does not come with end caps.
Brand
NRF
Application
Universal
Very well priced combination blind and fly-screens in Grey. With these blind the user has the ability to completely black out the vehicle or to just partially allow light in, all the time being totally protected against insects. The blind are fitted as standard by many European motorhome manufacturers. It is possible to trim the height of these blind. 1700mm x 650mm (L = 1776mm x H 650mm). This Blind does not come with end caps.
Brand
NRF
Application
Universal
Fiamma 98655-017 mounting adapter bracket kit for awnings up to 3.50 m long. 2 pcs. 8cm bracket. Fits Peugeot J5, Citron C25, Fiat Ducato before 1994, Ford Transit and Mercedes Sprinter 208 D KB vans.
Brand
Fiamma
Application
Multipurpose
