Indel B medical line temperature controlled heater, featuring a 5 litre capacity and built-in isothermal containers designed for installation and use inside ambulances.
RM7 is a controlled temperature electrical resistance heater for the heating of intravenously injectable drugs.
Indel B RM7 is designed to reach and maintain a temperature of 36°C with a tolerance of +/-1.5°C. However, the digital thermostat allows you to set a different temperature in a range from 32°C to 40°C. If the set temperature varies by more than +/-1.5°C, two alarms will be set off: an acoustic alarm (buzzer) and a visual alarm (red flashing LED).
Group: Medical Heaters
Battery protection: Yes
Specification
Brand
Indel B
Voltage Description
12V & 24V DC
Model
RM7
Height Description
403.8mm (15.9")
Width
276.8mm (10.9")
Depth
241.3mm (9.5")
Weight
10.9kg (24 lb)
Colour
Black
Wattage
50W Absorption
Approvals
CE, E-Mark
Consumption
0.26 kWh/24h
Series
Medical Line
Capacity Description
5.6 Litres
Country of Origin
Italy
Indel B medical line temperature controlled fridge with built-in isothermal containers designed for installation and use inside ambulances.
FM7 TOP is a controlled temperature compressor refrigerator for the storage and transport of drugs.
The fridge is designed to reach and maintain a temperature of 4°C with a tolerance of +/-1.5°C. The thermostat allows you to set a specific temperature in a range from 2°C to 8°C. If the set temperature varies by more than +/-1.5°C, two alarms will be activated: an acoustic alarm (buzzer) and a visual alarm (red flashing LED). Both alarms will remain active until voluntarily reset by the health operator or through the procedure indicated in the guide.
The refrigeration unit is remotely-controllable for maximum installation flexibility.
Group: Medical Refrigerators
Refrigerant gas: R134a
Battery protection: Yes
Specification
Brand
Indel B
Voltage Description
12V & 24V DC
Model
FM7 Top
Rating
SN-T Climate class
Height Description
530.8mm (20.9")
Width
276.8mm (10.9")
Depth
241.3mm (9.5")
Weight
10.9kg (24 lb)
Colour
Black
Fridge Capacity
5.6 Litres
Wattage
56W to 67W Absorption
Approvals
CE, E-Mark
Consumption
0.26 kWh/24h
Series
Medical Line
Capacity Description
5.6 Litres
Country of Origin
Italy
Indel B medical line temperature controlled fridge with built-in isothermal containers designed for installation and use inside ambulances.
FM7 BACK is a controlled temperature compressor refrigerator for the storage and transport of drugs.
The fridge is designed to reach and maintain a temperature of 4°C with a tolerance of +/-1.5°C. The thermostat allows you to set a specific temperature in a range from 2°C to 8°C. If the set temperature varies by more than +/-1.5°C, two alarms will be activated: an acoustic alarm (buzzer) and a visual alarm (red flashing LED). Both alarms will remain active until voluntarily reset by the health operator or through the procedure indicated in the guide.
This model differs from FM7 TOP for the compressor at the rear. The compressor, however, can be moved to allow for more flexible installation.
Group: Medical Refrigerators
Refrigerant gas: R134a
Battery protection: Yes
Specification
Brand
Indel B
Voltage Description
12V & 24V DC
Model
FM7 Back
Rating
SN-T Climate class
Height Description
403.8mm (15.9")
Width
276.8mm (10.9")
Depth
241.3mm (9.5")
Weight
10.9kg (24 lb)
Colour
Black
Fridge Capacity
5.6 Litres
Wattage
56W to 67W Absorption
Approvals
CE, E-Mark
Consumption
0.26 kWh/24h
Series
Medical Line
Capacity Description
5.6 Litres
Country of Origin
Italy
When it comes to ensuring your caravan or motorhome is in top condition, you need a reliable sealant that will protect it from the elements and prevent any leaks. That's where Sikaflex 522 comes in. This sealant is specifically designed for use on caravans and motorhomes, providing a secure and long-lasting bond that will keep your vehicle safe and dry.
One of the key features of Sikaflex 522 is its excellent UV resistance, meaning it won't break down or degrade when exposed to sunlight, ensuring a durable seal that will stand the test of time. Plus, its flexible nature allows for movement without compromising the bond, making it perfect for use on vehicles that are constantly on the move.
Key Features:
Specifically designed for caravans and motorhomes
color for a seamless finish
Excellent UV resistance for long-lasting durability
Flexible formula allows for movement without compromising the bond
Easy to apply and quick drying for convenience
Don't take any chances when it comes to protecting your caravan or motorhome. Invest in Sikaflex 522 today and rest easy knowing your vehicle is sealed with the best.
The OLPRO Awning Tie Down Kit is designed to provide maximum stability and security for your Fiamma, Omnistor, and Thule awnings. With heavy-duty storm pegs, durable nylon straps, and strong triangular awning rail straps, this kit is essential for keeping your awning firmly in place in windy or stormy conditions.
Key Features:
Reinforced Nylon Straps – 2x 4.8m nylon straps with plastic hooks for a secure hold
Storm Pegs Included – 2x 38cm heavy-duty pegs for anchoring in soft or firm ground
Shock Absorbing Springs – 2x 10cm springs to reduce wind tension and prevent damage
Triangular Awning Straps – 2x triangular straps for secure awning rail attachment (4mm & 6mm beading, 17.5mm width)
Universal Fit – Compatible with Fiamma, Omnistor, and Thule awnings
Specifications:
Pegs: 2x 38cm Storm Pegs
Springs: 2x 10cm Springs
Straps: 2x 4.8m Nylon Straps (with plastic hooks)
Triangular Straps: 2x for awning rails (4mm & 6mm beading, 17.5mm width)
Mounting kit for Fiamma awnings on Renault Master (2010+). Includes 12cm, 44cm, and 64cm brackets. Genuine Fiamma adapter – durable and easy to install.
Upgrade your Renault Master camper van with the Fiamma 98655-881 Mounting Adapter Bracket Kit, tailor-made for models from 2010 onwards. This set includes three high-quality brackets (12 cm, 44 cm, and 64 cm) to provide a secure and reliable mounting solution for your Fiamma awning.
Whether you're outfitting your vehicle for full-time travel or seasonal adventures, this bracket kit ensures your awning is safely supported for use on the road or at the campsite.
Compatible with:✔️ Renault Master 2010+), Opel Movano, or Nissan NV400 H2 van with the,✔️ Fiamma F45S, F80S, and similar awnings
Kit Contents:
1x 12 cm mounting bracket
1x 44 cm mounting bracket
1x 64 cm mounting bracket
Engineered by Fiamma – the trusted name in caravan and motorhome accessories – this kit is built for strength, longevity, and a seamless fit to your vehicle.
Rooftop air conditioner RTA-2500L black
Create the desired climate in your camping vehicle with the Mestic roof air conditioner RTA-2500L. The roof air conditioner not only cools, but also heats in combination with the integrated heat pump. Simply set the temperature between 16 °C and 31 °C.
Environmentally friendly refrigerant
Cool, heat or ventilate the camper or caravan with the Mestic roof air conditioner RTA-2500L. With a cooling power of 2500 W and a heating power of 2750 W, this air conditioner is suitable for vehicles up to 8 m long. You easily set the caravan air conditioner between 16 °C and 31 °C. Much of the housing is made of polypropylene, a very strong and lightweight material. In addition, the roof air conditioner is compact in size. This leaves enough space on the roof to fit a solar panel or roof box. The refrigerant used in this air conditioner is the very environmentally friendly and efficient R290 gas. This gas has a GWP (Global Warming Potential) of only 3, which is significantly lower than other refrigerants.
Main benefits
Cools, heats and ventilates
Cooling capacity: 2500 W
Heating capacity: 2750 W
Setting range: 16 °C to 31 °C
Polypropylene housing reduces weight
Adjustable air flow: controls volume to the left and right
Installation dimensions: 40 x 40 cm (even possible from 38 x 38 cm)
Dimensions: 96 x 58.5 x 25.9 cm (lxwxh)
Adjustable airflow volume
Want to keep your vehicle cool while sleeping without the cool airflow directed at you? It can! The airflow of the Mestic roof air conditioner RTA-2500L can be adjusted left and right separately. You can also choose to only use the ventilation modes at night. Thanks to the handy timer function, you decide how long you leave the air conditioner on. Do you usually sleep lightly? The already very quiet air conditioner gets even quieter in sleep mode. And if that's not enough, the caravan air conditioner even features atmospheric LED lighting. Set all this easily via the touchscreen display of the indoor unit, the included remote control or your smartphone in combination with the Mestic app.
Cooling, heating, ventilating: the Mestic roof air conditioner RTA-2500L can do it all! With the Mestic app, you have full control over the climate in your caravan or camper. Adjustable from 16 °C to 31 °C, environmentally friendly refrigerant, with polypropylene housing, adjustable airflow and more.
Installation Manual
Specifications
Article number
1517860
Connection voltage
230 V | 50 Hz
Number of ventilation levels
3
Dimensions (lxwxh)
96 x 58,5 x 25,9 cm
Width indoor unit
67 cm
Width outdoor unit
96 cm
Depth indoor unit
52,3 cm
Depth outdoor unit
58,5 cm
Display
Touchscreen display
EAN-code
8712757479955
Suitable for vehicles up to
8 m
Weight
36 kg
Height indoor unit
5 cm
Height outdoor unit
25,9 cm
Including remote control
Yes
Adjustable temperature range
16 - 31 °C
Colour
Black
Cooling power
2500 W | 8530 BTU/h
Refrigerant
R290 (GWP 3)
Airflow
In volume adjustable to the left and right side
Air flow capacity
350 m³/h
Night mode
Yes
Power consumption (cooling/heating)
4,3 A (950 W) / 4,4 A (965 W)
Timer
Yes
Filter
HEPA filter
Heating power
2750 W | 9383 BTU/h
Operating temperature
-5 °C to 46 °C
The Cubo Breeze® V2 Campervan Awning is crafted for adventurers seeking versatile space, breathability, and an effortless set-up whilst on the go.
Its ingeniously designed layout offers generous room, creating a homey extension to your vehicle, whether you’re setting up for an overnight stay, relaxing with a book, sharing a meal with friends, or simply enjoying the fresh air, the Cubo Breeze V2 Campervan Awning is the perfect shelter.
The Cubo Breeze V2 Campervan Awning now comes with dual doors on the tunnel for easy entry to your vehicle without the worry of bringing mud into your awning, as well as peak canopy pole at the front of the Awning which provides adequate shelter for opening and closing the main door.
Made from OLTECH® REPRO 150D fabric - repurposed single-use plastic bottles – the Cubo Breeze V2 is a sustainable alternative to most Campervan Awnings on the market. The Cubo Breeze V2 also utilises OLPRO’s Breeze technology, ensuring a quick pitch time of just 10 minutes with its multi-point inflation beams.
The Cubo Breeze® v2 features OLPRO’s AQUABARRIER™ & TERRAGRIP™ systems, offering unparalleled protection from water ingress & stability no matter the pitch.
AQUABARRIER™ is OLPRO’s new zip system, a four-tiered approach to keeping water out of your awning. With AQUABARRIER™, you can camp with confidence, knowing that your gear is protected from water ingress, even in the most challenging conditions.
TERRAGRIP™ is OLPRO’s new customisable pegging system. Offering best in class stability, TERRAGRIP™ is a game-changer for anyone who loves camping. Born from the need to improve the performance of flysheets, TERRAGRIP™ is designed to give you more control over your awning, ensuring it stays secure and taut, no matter the weather or terrain.
The awning features dual beading on the tunnel (4mm & 6mm) to fit standard awning rails (fixed or roll out) and can be used on your sliding door or your tailgate/barn doors.
The versatile design of the Cubo Breeze V2 Campervan Awning makes it ideally suited for both tailgate and side door configurations, ensuring a seamless and adaptable outdoor experience for any adventure.
The Cubo Breeze® V2 Campervan Awning features:
Dual doors on the tunnel
Tension strap on the tunnel
Dual beading on the tunnel (4mm & 6mm)
AQUABARRIER Zip System
TERRAGRIP Pegging system
Tunnel throw-over straps
Sewn-in Groundsheet
Ventilation Panels
Peak canopy pole on the front of the awning for adequate shelter
PVC windows
Pegs included
Bright guy lines included
Manual pump included
Large carry bag
Repair kit included
Spare beam included
Made from/with:
OLTECH® REPRO 150D – a sustainable material that is made from repurposed single-use plastic bottles.
OLPRO’s Breeze® technology – reinforced TPU Beams
5000mm H/H
Specification:
Will Fit: All vehicles between a height of 190cm and 250cm
Colours Available: Charcoal, Blue & Grey, Orange & Black, Light Grey & Lime
Height (cm): 220cm (86.6")
Length (cm): 310cm (122.0")
Width (cm): 310cm (122.0")
Packed Dimensions (cm): 82cm x 37cm x 37cm (32.28" x 14.56" x 14.56")
Weight (kg): 18kg
Hydrostatic Head: 5,000mm H/H
Material: OLTECH REPRO 150D
Inflatable Beams: Reinforced TPU Beams
Awning Beading: 4mm & 6mm
Sewn-in Groundsheet: Yes
Pitching Time: 10 Minutes
Number of Doors: 2
Number of Windows: 4
Bedroom Inner: No
Standing Room: Yes
What's Included? Manual Pump, Pegs, Guy Ropes, Storm Straps, Tunnel Throw Over Straps, Carry Bag, Repair Kit
Experience unparalleled freedom, versatility, and outdoor living at its finest with the Loopo Breeze® V2 Campervan Awning.
What makes the Loopo Breeze V2 Campervan Awning perfect for any van-lifer is its versatility to be an awning exclusively just for extra living or storage space during the day and a sleeping area at night with a removable two-berth inner bedroom (purchased separately).
Made from OLTECH® REPRO 150D fabric - repurposed single-use plastic bottles - making it a sustainable alternative to most Campervan Awnings on the market. You can also pitch the Loopo Breeze V2 Campervan Awning in just 10 minutes with OLPRO’s Breeze technology, ensuring that you can enjoy relaxing on the campsite in no time.
The Loopo Breeze® v2 Campervan Awning features strategically placed ventilation points, ensuring optimal airflow throughout the space. Enjoy fresh air and a pleasant atmosphere even on the warmest days.
The Loopo Breeze® v2 features OLPRO’s AQUABARRIER™ & TERRAGRIP™ systems, offering unparalleled protection from water ingress & stability no matter the pitch.
AQUABARRIER™ is OLPRO’s new zip system, a four-tiered approach to keeping water out of your awning. With AQUABARRIER™, you can camp with confidence, knowing that your gear is protected from water ingress, even in the most challenging conditions.
TERRAGRIP™ is OLPRO’s new customisable pegging system. Offering best in class stability, TERRAGRIP™ is a game-changer for anyone who loves camping. Born from the need to improve the performance of flysheets, TERRAGRIP™ is designed to give you more control over your awning, ensuring it stays secure and taut, no matter the weather or terrain.
The Loopo Breeze® v2 will connect to your vehicle with the dual beading on the tunnel (suitable for awning rails that are 4mm or 6mm) or you can use the awnings throw-over straps.
The Loopo Breeze® V2 Campervan Awning features:
Dual doors on the tunnel
Tension strap on the tunnel
Dual beading on the tunnel (4mm & 6mm)
AQUABARRIER Zip System
TERRAGRIP Pegging system
Sewn-in Groundsheet
Ventilation Panels
Manual pump included
Tunnel throw-over straps
Bright guy lines included
Pegs included
Large carry bag
Repair kit included
Cable entry point
Spare beam included
Made from:
OLTECH® REPRO 150D– a sustainable material that is made from repurposed single-use plastic bottles.
OLPRO’s Breeze® technology – reinforced TPU Beams
5,000mm H/H
Specification:
Will Fit: All vehicles between a height of 190cm and 250cm
Colours Available: Charcoal, Orange & Black
Height (cm): 210cm (82.7")
Length (cm): 390cm (153.5")
Width (cm): 310cm (122.0")
Packed Dimensions (cm): 82cm x 37cm x 37cm (32.28" x 14.56" x 14.56")
Weight (kg): 21kg
Hydrostatic Head: 5,000mm H/H
Material: OLTECH REPRO 150D
Inflatable Beams: Reinforced TPU Beams
Awning Beading: 4mm & 6mm
Sewn-in Groundsheet: Yes
Pitching Time: 10 Minutes
Number of Doors: 5
Number of Windows: 4
Bedroom Inner: Yes - Sold Seperately
Standing Room: Yes
What's Included? Manual Pump, Pegs, Guy Ropes, Storm Straps, Tunnel Throw Over Straps, Carry Bag, Repair Kit
Please note: the lifestyle images of the Charcoal & Orange Cocoon Breeze® V2 show the optional Cocoon Breeze Extension attached.
The OLPRO Cocoon Breeze® V2 is the updated version of our most popular drive-away campervan awning. With new features and easy-pitch Breeze® technology, it makes camping simpler and more comfortable.
The awning includes a blackout inner bedroom pod that can sleep up to five people. The divider can be removed if you want one big space. Alongside the bedroom, you get a large living area that is perfect for eating, relaxing, and spending time together.
The Cocoon Breeze® V2 now has a front-facing design, so the main doors line up with the front of your van. The tunnel has two doors with zips, so you don’t have to walk through mud to get to your vehicle. There is also a new side canopy that you can use for storage or as an entryway.
Made from OLTECH® REPRO 150D fabric, created using recycled plastic bottles, the Cocoon Breeze® V2 is strong, waterproof, and better for the planet. With Breeze® air beam technology, you can set it up in about 15 minutes.
This awning also includes AQUABARRIER™ and TERRAGRIP™ systems. AQUABARRIER™ is a new zip design that stops water from getting inside, even in heavy rain. TERRAGRIP™ is a pegging system that keeps the awning steady and tight, no matter the ground or the weather.
It fits standard awning rails (4mm and 6mm), and can be used with sliding doors, tailgates, or barn doors.
Features
Dual tunnel doors
Tunnel tension strap
Dual beading (4mm & 6mm)
AQUABARRIER™ zip system
TERRAGRIP™ pegging system
Tunnel throw-over straps
Sewn-in groundsheet
Ventilation panels
5-berth inner bedroom with divider
PVC windows
Side canopy poles
Cable entry point & Velcro straps
Lantern hook
Pegs, guy lines, and manual pump included
Large carry bag, repair kit, and spare beam included
Made from/with
OLTECH® REPRO 150D fabric – recycled single-use plastic bottles
Breeze® technology – reinforced TPU beams
5000mm H/H waterproof rating
Fly mesh on bedrooms and doors
Specification:
Will Fit: All vehicles between a height of 190cm and 250cm
Colours Available: Charcoal, Blue & Grey, Orange & Black
Height (cm): 210cm (82.7")
Length (cm): 455cm (179.1")
Width (cm): 350cm (137.8")
Packed Dimensions (cm): 82cm x 43cm x 43cm (32.28" x 16.9" x 16.9")
Weight (kg): 30kg
Hydrostatic Head: 5,000mm H/H
Material: OLTECH REPRO 150D
Inflatable Beams: Reinforced TPU Beams
Awning Beading: 4mm & 6mm
Sewn-in Groundsheet: Yes
Pitching Time: 15 Minutes
Number of Doors: 3
Number of Windows: 3
Bedroom Inner: 5 Berth & Blackout
Standing Room: Yes
What's Included? Manual Pump, Pegs, Guy Ropes, Storm Straps, Tunnel Throw Over Straps, Carry Bag, Repair Kit
The Hive Drive Away Campervan Awning is a six sided drive away awning with plenty of living space. It has a sleeping Pod attached to the side so it does not use up your valuable living space . The Hive has an impressive five windows that give you a three hundred and sixty view and the skylights in the roof fill the Hive's living area with light. Includes a spare bedroom pole as we know accidents happen.
The tunnel has two access doors so no need to walk through the awning to get to the van and the sleeping pod has an extra large inner tent that will fit a double air bed or can be removed to enlarge your living space. The awning is made from an above-standard 190T Rip-stop, fully waterproof material, with a rating of 5000 Hydrostatic Head and it also has fully taped seams. The poles are a mix of steel and fibreglass, providing extra stability. The front door has the benefit of a fly mesh screen for added privacy and to protect you from those pesky bugs.
The Hive Poled features:
PVC Windows
Blinds for all windows
Fly mesh on the entrance to the awning
Sewn-in Groundsheet
Tension strap on the tunnel
Dual beading on the tunnel (4mm & 6mm)
Dual tunnel doors for easy access
Tunnel throw-over straps (x3 straps that go over the top of your vehicle)
Ventilation panels
Bright guy lines included
Pegs included
Large carry bag
Repair kit included
Made from/with:
Fibreglass Poles
OLTECH® 190T - a sustainable material that is made from repurposed single-use plastic bottles
5,000mm Hydrostatic Head
Specification:
Will Fit: All vehicles between a height of 190cm and 250cm
Colours Available: Blue, Grey and Lime
Height (cm): 240cm (94.48")
Length (cm): 330cm (129.92")
Width (cm): 330cm (129.92")
Packed Dimensions (cm): 60cm x 40cm x 40cm (23.62" x 15.74" x 15.74")
Weight (kg): 18kg
Hydrostatic Head: 5,000mm H/H
Material: 190T OLTech
Poles: Fibreglass Roof poles & Steel Leg Poles
Awning Beading: 6mm
Sewn-in Groundsheet: Yes
Pitching Time: 25 Minutes
Number of Doors: 2
Number of Windows: 4 & 6 Roof Skylights
Bedroom Inner: Yes - 2 - Berth Darkened
Standing Room: Yes
What's Included? Pegs, Guy Ropes, Storm Straps, Tunnel Throw Over Straps, Carry Bag, Repair Kit, Poles
