This inverters allows you to power domestic equipment - requiring 230V AC - using 'leisure' or 'automotive' batteries rated at 12V DC. Victron Phoenix Inverters are built to last. They feature sophisticated full-bridge and toroidal transformer topology - which is suitable for powering sensitive electronics. They are overload, temperature, and short-circuit protected.
Manufacturer : Victron Energy
Output Wave Form : Pure Sine Wave
Voltage (V) : 12
Continuous Power (W) : 200
Peak Power (W) : 400
Continuous Output Power (VA) : 250
Features
VE.Direct communication port
The VE.Direct port can be connected to:
• A computer (VE.Direct to USB interface cable needed)
• Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)
• UK Type Socket
Fully configurable:
• Low battery voltage alarm trip and reset levels
• Low battery voltage cut-off and restart levels
• Dynamic cut-off: load dependent cut-off level
• Output voltage 210 - 245V
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO mode sense level
Monitoring:
• In- and output voltage, % load and alarms
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
LED diagnosis
Please see manual for a description.
To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.
PRODUCT CODE: PIN121251400
For more info please click this link:
Additional Information
CTA are the makers of superb quality seat swivels. Their complete range of seat swivels are crash tested and CE approved. All of the swivels listed below can be fitted on either the passenger or drivers side of the vehicle. All swivels are boxed together with nuts and bolts and fitting instructions. Boxer / Ducato 2007 on universal swivel.
Brand
CTA
Type
Seat Swivels
Application
Fiat
CTA are the makers of superb quality seat swivels. Their complete range of seat swivels are crash tested and CE approved. All of the swivels listed below can be fitted on either the passenger or drivers side of the vehicle. All swivels are boxed together with nuts and bolts and fitting instructions. Renault Master 04/2005 on universal swivel.
Brand
CTA
Type
Seat Swivels
Application
Renault
CTA Mercedes sprinter seat universal seat swivel (works on both passenger and driver's side). For Mercedes sprinter vehicles 2005 onwards.
Brand
CTA
Type
Seat Swivels
Application
Mercedes Benz
CTA are the makers of superb quality seat swivels. Their complete range of seat swivels are crash tested and CE approved. All of the swivels listed below can be fitted on either the passenger or drivers side of the vehicle. All swivels are boxed together with nuts and bolts and fitting instructions. Iveco Daily 2000 – 2014 Seat Swivel. (Some of the 2014 onwards vehicles are in fact fitted with 2000 – 2014 seats.)
Brand
CTA
Type
Seat Swivels
Application
Iveco
CTA are the makers of superb quality seat swivels. Their complete range of seat swivels are crash tested and CE approved. All of the swivels listed below can be fitted on either the passenger or drivers side of the vehicle. All swivels are boxed together with nuts and bolts and fitting instructions. Ford Transit 2004-2010 on universal swivel.
Brand
CTA
Type
Seat Swivels
Application
Ford
CTA are the makers of superb quality seat swivels. Their complete range of seat swivels are crash tested and CE approved. The swivel is universal so can be fitted to the driver side or passenger side of the vehicle. This swivel is for Renault Master vehicles from 2011 to the present day that have electronic handbrake. This swivel measures just 33mm high.
Brand
CTA
Type
Seat Swivels
Application
Renault
CTA are the makers of superb quality seat swivels. Their complete range of seat swivels are crash tested and CE approved. The swivel is universal so can be fitted to the driver side or passenger side of the vehicle. This swivel is for Renault Master vehicles from 2011 to the present day that have manual handbrake. This swivel measures 70mm high.
Brand
CTA
Type
Seat Swivels
Application
Renault
Crash tested and CE approved seat swivel that can be fitted on either the passenger or driver's side of the vehicle. All swivels are boxed together with nuts, bolts and fitting instructions. This version is for Iveco Daily vehicles from 2014 onwards. (Some of the 2014 onwards vehicles are in fact fitted with 2000 – 2014 seats.)
Brand
CTA
Type
Seat Swivels
Application
Iveco
Seat swivel plate from CTA that can be fitted on either the passenger or driver side of Volkswagen T5 and T6 vehicles from 2003 to present day. The swivel has a painted black finish and measures 429mm W x 434mm L x 37mm D.
If fitting the swivel to the driver side of a vehicle, please also order adaptor bracket, product code 32864. This Swivel is crash tested and homologated.
Brand
CTA
Type
Seat Swivels
Width
429mm
Depth
37mm
Length
434mm
Finish
Painted
Weight
7kg
Material
Steel
Colour
Black
Application
VW T5 and T6 vehicles from 2003 onward
Downloads
Data Sheet CTA Seat Swivel Plate VW T5 T6 32862
This seat swivel handbrake adaptor kit enables the CTA Seat Swivel Plate VW T5 / T6 (our product code 32862), to be fitted to the driver side of Volkswagen T5 and T6 vehicles from 2003 to present day. The kit matches to that of the seat swivel plate, with a painted black finish.
Brand
CTA
Type
Seat Swivels
Finish
Painted
Material
Steel
Colour
Black
Application
VW T5 and T6 vehicles from 2003 onward
