Indel B medical line temperature controlled fridge with built-in isothermal containers designed for installation and use inside ambulances. FM7 TOP is a controlled temperature compressor refrigerator for the storage and transport of drugs. The fridge is designed to reach and maintain a temperature of 4°C with a tolerance of +/-1.5°C. The thermostat allows you to set a specific temperature in a range from 2°C to 8°C. If the set temperature varies by more than +/-1.5°C, two alarms will be activated: an acoustic alarm (buzzer) and a visual alarm (red flashing LED). Both alarms will remain active until voluntarily reset by the health operator or through the procedure indicated in the guide. The refrigeration unit is remotely-controllable for maximum installation flexibility. Group: Medical Refrigerators Refrigerant gas: R134a Battery protection: Yes Specification Brand Indel B Voltage Description 12V & 24V DC Model FM7 Top Rating SN-T Climate class Height Description 530.8mm (20.9") Width 276.8mm (10.9") Depth 241.3mm (9.5") Weight 10.9kg (24 lb) Colour Black Fridge Capacity 5.6 Litres Wattage 56W to 67W Absorption Approvals CE, E-Mark Consumption 0.26 kWh/24h Series Medical Line Capacity Description 5.6 Litres Country of Origin Italy

Read more less

Indel B medical line temperature controlled fridge with built-in isothermal containers designed for installation and use inside ambulances. FM7 BACK is a controlled temperature compressor refrigerator for the storage and transport of drugs. The fridge is designed to reach and maintain a temperature of 4°C with a tolerance of +/-1.5°C. The thermostat allows you to set a specific temperature in a range from 2°C to 8°C. If the set temperature varies by more than +/-1.5°C, two alarms will be activated: an acoustic alarm (buzzer) and a visual alarm (red flashing LED). Both alarms will remain active until voluntarily reset by the health operator or through the procedure indicated in the guide. This model differs from FM7 TOP for the compressor at the rear. The compressor, however, can be moved to allow for more flexible installation. Group: Medical Refrigerators Refrigerant gas: R134a Battery protection: Yes Specification Brand Indel B Voltage Description 12V & 24V DC Model FM7 Back Rating SN-T Climate class Height Description 403.8mm (15.9") Width 276.8mm (10.9") Depth 241.3mm (9.5") Weight 10.9kg (24 lb) Colour Black Fridge Capacity 5.6 Litres Wattage 56W to 67W Absorption Approvals CE, E-Mark Consumption 0.26 kWh/24h Series Medical Line Capacity Description 5.6 Litres Country of Origin Italy

Read more less

When it comes to capturing road incidents or helping you drive safely, the Q200 has you covered. Equipped with a high-resolution 2K QHD image sensor, the Q200 lets you capture every moment of your drive in crystal-clear detail, even in low-light conditions. The Q200 can also help you stay safe while you drive with alerts for lane departures and forward collisions. You can adjust settings or download files on the go thanks to its built-in Wi-Fi, and safeguard your parked vehicle with the Q200’s Advanced Parking Surveillance Mode. Whats in the Box Main Dash Cam Unit GPS Cradle Mount with 3M Tape Extra 3M Tape 12V Power Cable & Hardwiring Cable 32GB MicroSD Card Adhesive Cable Holder (3ea) External GPS Antenna (If Selected) Quick Start Guide / Warranty Information/CS Information Silicagel Trim Tool CE Info Specifications Resolution: Front – QHD (2560 x 1440p) Rear – FHD (1920 x 1080p) (If Selected) Camera: Front – Omnivision OS04C20 Rear – BCFH-60 (If Selected) Frame Rate: 30fps Viewing Angle: 125° (Diagonal) Dimensions (WxDxH): 98.5 x 22 x 34 mm (3.9 x 0.87 x 1.3 inches) Weight:7g (0.13lbs) Storage Temperature: -20°C to 70°C (-4° to 158°F) Operating Temperature: -10° to 60°C (14° to 140°F) Capacity: MicroSD Card 32GB/64GB/128GB/256GB UHS-I Interface: DC-IN, V-IN, GPS, MicroSD Card Slot Input Power: DC 12V/24V, Built-in Supercapacitor GPS: GPS Antenna (If Selected) Languages: English (US, UK), French (Canada, France), Chinese (Simplified, Traditional), Spanish, German, Italian, Portuguese, Russian, Thai, Japanese, Czech, Korean, Hebrew, Arabic

Read more less

The OLPRO Awning Tie Down Kit is designed to provide maximum stability and security for your Fiamma, Omnistor, and Thule awnings. With heavy-duty storm pegs, durable nylon straps, and strong triangular awning rail straps, this kit is essential for keeping your awning firmly in place in windy or stormy conditions. Key Features: Reinforced Nylon Straps – 2x 4.8m nylon straps with plastic hooks for a secure hold Storm Pegs Included – 2x 38cm heavy-duty pegs for anchoring in soft or firm ground Shock Absorbing Springs – 2x 10cm springs to reduce wind tension and prevent damage Triangular Awning Straps – 2x triangular straps for secure awning rail attachment (4mm & 6mm beading, 17.5mm width) Universal Fit – Compatible with Fiamma, Omnistor, and Thule awnings Specifications: Pegs: 2x 38cm Storm Pegs Springs: 2x 10cm Springs Straps: 2x 4.8m Nylon Straps (with plastic hooks) Triangular Straps: 2x for awning rails (4mm & 6mm beading, 17.5mm width)    

Read more less

Mounting kit for Fiamma awnings on Renault Master (2010+). Includes 12cm, 44cm, and 64cm brackets. Genuine Fiamma adapter – durable and easy to install. Upgrade your Renault Master camper van with the Fiamma 98655-881 Mounting Adapter Bracket Kit, tailor-made for models from 2010 onwards. This set includes three high-quality brackets (12 cm, 44 cm, and 64 cm) to provide a secure and reliable mounting solution for your Fiamma awning. Whether you're outfitting your vehicle for full-time travel or seasonal adventures, this bracket kit ensures your awning is safely supported for use on the road or at the campsite. Compatible with:✔️  Renault Master 2010+), Opel Movano, or Nissan NV400 H2 van with the,✔️ Fiamma F45S, F80S, and similar awnings  Kit Contents: 1x 12 cm mounting bracket 1x 44 cm mounting bracket 1x 64 cm mounting bracket Engineered by Fiamma – the trusted name in caravan and motorhome accessories – this kit is built for strength, longevity, and a seamless fit to your vehicle.

Read more less

Rooftop air conditioner RTA-2500L black Create the desired climate in your camping vehicle with the Mestic roof air conditioner RTA-2500L. The roof air conditioner not only cools, but also heats in combination with the integrated heat pump. Simply set the temperature between 16 °C and 31 °C. Environmentally friendly refrigerant Cool, heat or ventilate the camper or caravan with the Mestic roof air conditioner RTA-2500L. With a cooling power of 2500 W and a heating power of 2750 W, this air conditioner is suitable for vehicles up to 8 m long. You easily set the caravan air conditioner between 16 °C and 31 °C. Much of the housing is made of polypropylene, a very strong and lightweight material. In addition, the roof air conditioner is compact in size. This leaves enough space on the roof to fit a solar panel or roof box. The refrigerant used in this air conditioner is the very environmentally friendly and efficient R290 gas. This gas has a GWP (Global Warming Potential) of only 3, which is significantly lower than other refrigerants.  Main benefits Cools, heats and ventilates Cooling capacity: 2500 W Heating capacity: 2750 W Setting range: 16 °C to 31 °C Polypropylene housing reduces weight Adjustable air flow: controls volume to the left and right Installation dimensions: 40 x 40 cm (even possible from 38 x 38 cm) Dimensions: 96 x 58.5 x 25.9 cm (lxwxh) Adjustable airflow volume Want to keep your vehicle cool while sleeping without the cool airflow directed at you? It can! The airflow of the Mestic roof air conditioner RTA-2500L can be adjusted left and right separately. You can also choose to only use the ventilation modes at night. Thanks to the handy timer function, you decide how long you leave the air conditioner on. Do you usually sleep lightly? The already very quiet air conditioner gets even quieter in sleep mode. And if that's not enough, the caravan air conditioner even features atmospheric LED lighting. Set all this easily via the touchscreen display of the indoor unit, the included remote control or your smartphone in combination with the Mestic app. Cooling, heating, ventilating: the Mestic roof air conditioner RTA-2500L can do it all! With the Mestic app, you have full control over the climate in your caravan or camper. Adjustable from 16 °C to 31 °C, environmentally friendly refrigerant, with polypropylene housing, adjustable airflow and more. Installation Manual Specifications Article number 1517860 Connection voltage 230 V | 50 Hz Number of ventilation levels 3 Dimensions (lxwxh) 96 x 58,5 x 25,9 cm Width indoor unit 67 cm Width outdoor unit 96 cm Depth indoor unit 52,3 cm Depth outdoor unit 58,5 cm Display Touchscreen display EAN-code 8712757479955 Suitable for vehicles up to 8 m Weight 36 kg Height indoor unit 5 cm Height outdoor unit 25,9 cm Including remote control Yes Adjustable temperature range 16 - 31 °C Colour Black Cooling power 2500 W | 8530 BTU/h Refrigerant R290 (GWP 3) Airflow In volume adjustable to the left and right side Air flow capacity 350 m³/h Night mode Yes Power consumption (cooling/heating) 4,3 A (950 W) / 4,4 A (965 W) Timer Yes Filter HEPA filter Heating power 2750 W | 9383 BTU/h Operating temperature -5 °C to 46 °C

Read more less

The Cubo Breeze® V2 Campervan Awning is crafted for adventurers seeking versatile space, breathability, and an effortless set-up whilst on the go. Its ingeniously designed layout offers generous room, creating a homey extension to your vehicle, whether you’re setting up for an overnight stay, relaxing with a book, sharing a meal with friends, or simply enjoying the fresh air, the Cubo Breeze V2 Campervan Awning is the perfect shelter. The Cubo Breeze V2 Campervan Awning now comes with dual doors on the tunnel for easy entry to your vehicle without the worry of bringing mud into your awning, as well as peak canopy pole at the front of the Awning which provides adequate shelter for opening and closing the main door. Made from OLTECH® REPRO 150D fabric - repurposed single-use plastic bottles – the Cubo Breeze V2 is a sustainable alternative to most Campervan Awnings on the market. The Cubo Breeze V2 also utilises OLPRO’s Breeze technology, ensuring a quick pitch time of just 10 minutes with its multi-point inflation beams. The Cubo Breeze® v2 features OLPRO’s AQUABARRIER™ & TERRAGRIP™ systems, offering unparalleled protection from water ingress & stability no matter the pitch. AQUABARRIER™ is OLPRO’s new zip system, a four-tiered approach to keeping water out of your awning. With AQUABARRIER™, you can camp with confidence, knowing that your gear is protected from water ingress, even in the most challenging conditions.  TERRAGRIP™ is OLPRO’s new customisable pegging system. Offering best in class stability, TERRAGRIP™ is a game-changer for anyone who loves camping. Born from the need to improve the performance of flysheets, TERRAGRIP™ is designed to give you more control over your awning, ensuring it stays secure and taut, no matter the weather or terrain.  The awning features dual beading on the tunnel (4mm & 6mm) to fit standard awning rails (fixed or roll out) and can be used on your sliding door or your tailgate/barn doors. The versatile design of the Cubo Breeze V2 Campervan Awning makes it ideally suited for both tailgate and side door configurations, ensuring a seamless and adaptable outdoor experience for any adventure. The Cubo Breeze® V2 Campervan Awning features: Dual doors on the tunnel Tension strap on the tunnel Dual beading on the tunnel (4mm & 6mm) AQUABARRIER Zip System TERRAGRIP Pegging system Tunnel throw-over straps Sewn-in Groundsheet Ventilation Panels Peak canopy pole on the front of the awning for adequate shelter PVC windows Pegs included Bright guy lines included Manual pump included Large carry bag Repair kit included Spare beam included Made from/with: OLTECH® REPRO 150D – a sustainable material that is made from repurposed single-use plastic bottles. OLPRO’s Breeze® technology – reinforced TPU Beams 5000mm H/H Specification: Will Fit: All vehicles between a height of 190cm and 250cm Colours Available: Charcoal, Blue & Grey, Orange & Black, Light Grey & Lime Height (cm): 220cm (86.6") Length (cm): 310cm (122.0") Width (cm): 310cm (122.0") Packed Dimensions (cm): 82cm x 37cm x 37cm (32.28" x 14.56" x 14.56") Weight (kg): 18kg Hydrostatic Head: 5,000mm H/H Material: OLTECH REPRO 150D Inflatable Beams: Reinforced TPU Beams Awning Beading: 4mm & 6mm Sewn-in Groundsheet: Yes Pitching Time: 10 Minutes Number of Doors: 2 Number of Windows: 4 Bedroom Inner: No Standing Room: Yes What's Included? Manual Pump, Pegs, Guy Ropes, Storm Straps, Tunnel Throw Over Straps, Carry Bag, Repair Kit      

Read more less

Experience unparalleled freedom, versatility, and outdoor living at its finest with the Loopo Breeze® V2 Campervan Awning. What makes the Loopo Breeze V2 Campervan Awning perfect for any van-lifer is its versatility to be an awning exclusively just for extra living or storage space during the day and a sleeping area at night with a removable two-berth inner bedroom (purchased separately). Made from OLTECH® REPRO 150D fabric - repurposed single-use plastic bottles - making it a sustainable alternative to most Campervan Awnings on the market. You can also pitch the Loopo Breeze V2 Campervan Awning in just 10 minutes with OLPRO’s Breeze technology, ensuring that you can enjoy relaxing on the campsite in no time. The Loopo Breeze® v2 Campervan Awning features strategically placed ventilation points, ensuring optimal airflow throughout the space. Enjoy fresh air and a pleasant atmosphere even on the warmest days. The Loopo Breeze® v2 features OLPRO’s AQUABARRIER™ & TERRAGRIP™ systems, offering unparalleled protection from water ingress & stability no matter the pitch. AQUABARRIER™ is OLPRO’s new zip system, a four-tiered approach to keeping water out of your awning. With AQUABARRIER™, you can camp with confidence, knowing that your gear is protected from water ingress, even in the most challenging conditions.  TERRAGRIP™ is OLPRO’s new customisable pegging system. Offering best in class stability, TERRAGRIP™ is a game-changer for anyone who loves camping. Born from the need to improve the performance of flysheets, TERRAGRIP™ is designed to give you more control over your awning, ensuring it stays secure and taut, no matter the weather or terrain.  The Loopo Breeze® v2 will connect to your vehicle with the dual beading on the tunnel (suitable for awning rails that are 4mm or 6mm) or you can use the awnings throw-over straps. The Loopo Breeze® V2 Campervan Awning features: Dual doors on the tunnel Tension strap on the tunnel Dual beading on the tunnel (4mm & 6mm) AQUABARRIER Zip System TERRAGRIP Pegging system Sewn-in Groundsheet Ventilation Panels Manual pump included Tunnel throw-over straps Bright guy lines included Pegs included Large carry bag Repair kit included Cable entry point Spare beam included Made from: OLTECH® REPRO 150D– a sustainable material that is made from repurposed single-use plastic bottles. OLPRO’s Breeze® technology – reinforced TPU Beams 5,000mm H/H Specification: Will Fit: All vehicles between a height of 190cm and 250cm Colours Available: Charcoal, Orange & Black Height (cm): 210cm (82.7") Length (cm): 390cm (153.5") Width (cm): 310cm (122.0") Packed Dimensions (cm): 82cm x 37cm x 37cm (32.28" x 14.56" x 14.56") Weight (kg): 21kg Hydrostatic Head: 5,000mm H/H Material: OLTECH REPRO 150D Inflatable Beams: Reinforced TPU Beams Awning Beading: 4mm & 6mm Sewn-in Groundsheet: Yes Pitching Time: 10 Minutes Number of Doors: 5 Number of Windows: 4 Bedroom Inner: Yes - Sold Seperately Standing Room: Yes What's Included? Manual Pump, Pegs, Guy Ropes, Storm Straps, Tunnel Throw Over Straps, Carry Bag, Repair Kit      

Read more less

Please note: the lifestyle images of the Charcoal & Orange Cocoon Breeze® V2 show the optional Cocoon Breeze Extension attached. The OLPRO Cocoon Breeze® V2 is the updated version of our most popular drive-away campervan awning. With new features and easy-pitch Breeze® technology, it makes camping simpler and more comfortable. The awning includes a blackout inner bedroom pod that can sleep up to five people. The divider can be removed if you want one big space. Alongside the bedroom, you get a large living area that is perfect for eating, relaxing, and spending time together. The Cocoon Breeze® V2 now has a front-facing design, so the main doors line up with the front of your van. The tunnel has two doors with zips, so you don’t have to walk through mud to get to your vehicle. There is also a new side canopy that you can use for storage or as an entryway. Made from OLTECH® REPRO 150D fabric, created using recycled plastic bottles, the Cocoon Breeze® V2 is strong, waterproof, and better for the planet. With Breeze® air beam technology, you can set it up in about 15 minutes. This awning also includes AQUABARRIER™ and TERRAGRIP™ systems. AQUABARRIER™ is a new zip design that stops water from getting inside, even in heavy rain. TERRAGRIP™ is a pegging system that keeps the awning steady and tight, no matter the ground or the weather. It fits standard awning rails (4mm and 6mm), and can be used with sliding doors, tailgates, or barn doors. Features Dual tunnel doors Tunnel tension strap Dual beading (4mm & 6mm) AQUABARRIER™ zip system TERRAGRIP™ pegging system Tunnel throw-over straps Sewn-in groundsheet Ventilation panels 5-berth inner bedroom with divider PVC windows Side canopy poles Cable entry point & Velcro straps Lantern hook Pegs, guy lines, and manual pump included Large carry bag, repair kit, and spare beam included Made from/with OLTECH® REPRO 150D fabric – recycled single-use plastic bottles Breeze® technology – reinforced TPU beams 5000mm H/H waterproof rating Fly mesh on bedrooms and doors Specification: Will Fit: All vehicles between a height of 190cm and 250cm Colours Available: Charcoal, Blue & Grey, Orange & Black Height (cm): 210cm (82.7") Length (cm): 455cm (179.1") Width (cm): 350cm (137.8") Packed Dimensions (cm): 82cm x 43cm x 43cm (32.28" x 16.9" x 16.9") Weight (kg): 30kg Hydrostatic Head: 5,000mm H/H Material: OLTECH REPRO 150D Inflatable Beams: Reinforced TPU Beams Awning Beading: 4mm & 6mm Sewn-in Groundsheet: Yes Pitching Time: 15 Minutes Number of Doors: 3 Number of Windows: 3 Bedroom Inner: 5 Berth & Blackout Standing Room: Yes What's Included? Manual Pump, Pegs, Guy Ropes, Storm Straps, Tunnel Throw Over Straps, Carry Bag, Repair Kit  

Read more less

The Hive Drive Away Campervan Awning is a six sided drive away awning with plenty of living space.  It has a sleeping Pod attached to the side so it does not use up your valuable living space . The Hive has an impressive five windows that give you a three hundred and sixty view and the skylights in the roof fill the Hive's living area with light. Includes a spare bedroom pole as we know accidents happen. The tunnel has two access doors so no need to walk through the awning to get to the van and the sleeping pod has an extra large inner tent that will fit a double air bed or can be removed to enlarge your living space.  The awning is made from an above-standard 190T Rip-stop, fully waterproof material, with a rating of 5000 Hydrostatic Head and it also has fully taped seams. The poles are a mix of steel and fibreglass, providing extra stability. The front door has the benefit of a fly mesh screen for added privacy and to protect you from those pesky bugs.  The Hive Poled features: PVC Windows Blinds for all windows Fly mesh on the entrance to the awning Sewn-in Groundsheet Tension strap on the tunnel Dual beading on the tunnel (4mm & 6mm) Dual tunnel doors for easy access Tunnel throw-over straps (x3 straps that go over the top of your vehicle) Ventilation panels Bright guy lines included Pegs included Large carry bag Repair kit included Made from/with: Fibreglass Poles OLTECH® 190T - a sustainable material that is made from repurposed single-use plastic bottles 5,000mm Hydrostatic Head Specification: Will Fit: All vehicles between a height of 190cm and 250cm Colours Available: Blue, Grey and Lime Height (cm): 240cm (94.48") Length (cm): 330cm (129.92") Width (cm): 330cm (129.92") Packed Dimensions (cm): 60cm x 40cm x 40cm (23.62" x 15.74" x 15.74") Weight (kg): 18kg Hydrostatic Head: 5,000mm H/H Material: 190T OLTech Poles: Fibreglass Roof poles & Steel Leg Poles Awning Beading: 6mm Sewn-in Groundsheet: Yes Pitching Time: 25 Minutes Number of Doors: 2 Number of Windows: 4 & 6 Roof Skylights Bedroom Inner: Yes - 2 - Berth Darkened Standing Room: Yes What's Included? Pegs, Guy Ropes, Storm Straps, Tunnel Throw Over Straps, Carry Bag, Repair Kit, Poles  

Read more less

The Wydale Plastics Wheel Arch Fit Kit is made to fit Ford Transit Custom and VW T7 Transporter vans. It comes in 31L or 37L sizes and sits over the wheel arch to give you extra water storage without wasting space. The tank is made from tough plastic that lasts a long time. The kit includes all the parts you need, so it is simple to fit. This makes it a great choice for campervans, motorhomes, and work vans. Key Features: Fits Ford Transit Custom and VW T7 Transporter Available in 31L or 37L sizes Strong plastic tank that lasts Sits over the wheel arch to save space Complete kit for easy fitting Perfect for campers, vans, and motorhomes Make good use of your van space with the Wydale Plastics Wheel Arch Fit Kit — simple, strong, and built to fit right. Brand Wydale Plastics Application Transit Custom / VWT7 Transporter

Read more less

The Wydale Plastics 37L Wheel Arch Tank is made to fit neatly over the wheel arch in Ford Transit Custom and VW T7 Transporter vans. It gives you safe, easy water storage without taking up extra space in your van. Made from tough plastic, this 37-litre tank is strong, reliable, and built to last. It is perfect for campervans, motorhomes, and work vans where saving space and carrying water is important. Key Features: Fits Ford Transit Custom and VW T7 Transporter 37-litre water tank capacity Made from strong, long-lasting plastic Fits over the wheel arch to save space Great for campervans, vans, and motorhomes The Wydale Plastics 37L Wheel Arch Tank is the simple way to add water storage to your van while keeping space free for everything else. Brand Wydale Plastics Colour Black Application Transit Custom / VWT7 Transporter Capacity Description 37L

Read more less