Fitting kit for our 92-litre Underslung Water Tank for Ducato L3/L4 LWB vehicles.
Brand
Wydale Plastics
Model
USK92F
Height Description
90mm
Width
225mm
Depth
110mm
Weight
1.8kg
Country of Origin
United Kingdom
Complete fitting kit for our 180-litre underslung water tank , for Volkswagen Crafter and MAN TGE Vans (2017 - present).
Kit contents:
5 x 180L Underslung Crafter brackets
11 x M8 x 16mm socket head screws
1 x M10 x 20mm Hexset screws
1 x M10 x 25mm x 1.5mm Washer
14 x 5.5 x 25mm Evoshield TEK 3 screws
1 x 1/2" BSP x 13mm hosetail
1 x 1/2" BSP x 20mm 90 degree hosetail
Brand
Wydale Plastics
Model
USK180C
Country of Origin
United Kingdom
A 180-litre underslung water tank for Volkswagen Crafter and MAN TGE Vans (2017 - present).
This tank is designed specifically for front-wheel drive long wheelbase (LWB) and extra-long wheelbase (XLWB) vehicle models. The tank is versatile, fitting both left and right-hand drive vehicles.
Brand
Wydale Plastics
Type
Low Profile Water Tanks
Model
T180UBK5
Height Description
230mm
Width
1600mm
Depth
1260mm
Weight
23kg
Colour
Black
Outlet
1/2 BSP
Capacity Description
180 Litres
Country of Origin
United Kingdom
Downloads
Dimensional Drawing T180UBK5
A 28-litre water tank suitable for both storage and transportation of potable (drinkable) water and various other liquids.
The semi-translucent finish allows for easy viewing of the liquid level inside the tank.
The tank comes with a 4-inch plain screw cap to help in preventing the build-up of pressure inside the tank when it is filled with liquid. It is also equipped with a 1/2-inch outlet.
Brand
Wydale Plastics
Type
Medium Profile Water Tanks
Model
T28TNA4
Height Description
580mm
Width
200mm
Depth
270mm
Weight
3kg
Colour
Transparent
Outlet
1/2" BSP
Capacity Description
28 Litres
Country of Origin
United Kingdom
A 62-litre underslung water tank specifically designed for use with Fiat Ducato LWB vehicles (2006 onwards L3 and L4 models, including AdBlue models). The tank is also compatible with Peugeot Boxer and Citroen Relay vans of the same model years and sizes, including left-hand drive variants.
Outlets and vents:
1 x 1/2″ BSP Female outlet
1 x 1 1/4″ BSP Female outlet
2 x 1/2″ BSP pre-installed vents
Internal Lid: 1 x 5″ internal lid
Suitable for Fiat Ducato, Peogeot Boxer and Citroen Relay vehicles (>2006) - X250 & X290. Fits only long wheel base (LBW) and extra long wheelbase (XLWB) chassis variants. These tanks can be fitted individually or together as a twin tank with the 92 litre version (T92UBK5).
Not suitable for short wheelbase (SWB) and medium wheelbase (MWB) versions. May not fit vehicles with rear air suspension.
Complete fitting kits are available separately.
Fitting Kit Code: USK62F1Plumbing Kit Code: USKSDPTwin tanks Fitting kit: USKTDC1Twin tanks kit: USKTDP
Brand
Wydale Plastics
Type
Medium Profile Water Tanks
Model
T62UBK5
Height Description
195mm
Width
760mm
Depth
570mm
Weight
8.5kg
Colour
Black
Capacity Description
62 Litres
Country of Origin
United Kingdom
Plumbing kit for use with either the 62-litre or 92-litre Underslung Water Tanks for Ducato L3/L4 LWB vehicles.
Kit contents:
1 1/4" BSPM x 40mm hosetail
1 1/4" BSPM x 40mm hosetail 90 degree
1 1/4" Female tee
1/2" BSP plug
1/2" BSPM x 13mm hosetail
1 1/4" BSPM x 20mm hosetail
1 1/4" x 47.5mm plastic nipple
1 1/4" x 1/2" plastic bush
PTFE tape 12mm x 10m
Brand
Wydale Plastics
Model
USKSDP
Height Description
100mm
Width
200mm
Depth
200mm
Weight
0.3kg
Country of Origin
United Kingdom
If you place a standard bike carrier on a standard towbar, you can no longer reach the rear doors. A recognizable problem for many people with a campervan. The Memo Van-Swing has a smart hinge pivoting construction, with which you can easily turn the bike carrier away from the rear doors, even if there are bikes on it. This means that the luggage compartment of your bus is always easily accessible. The Van-Swing is suitable for almost every standard bike carrier for the towbar. It can carry a total of 60 kg, in most cases sufficient for your bike carrier and two bikes.
Locking Pin:
The swing has a locking pin that allows you to lock the carrier when closed, to prevent it swinging open when moving.
Mounting on a flange ball:
The Van-Swing is mounted on the existing towbar with flange ball and fits directly on most brands of towbars. This construction offers an easy solution for your campervan and gives the Van-Swing more load capacity. The Van-Swing may not fit (directly) on your towbar, for some variants we have solutions available. Get in contact for the right solution.
European type approval
The Van-Swing has a European type approval. You are guaranteed to be safe on the road.
Note: the Van-Swing is not suitable for towing trailer loads.
Brand
Memo Europe
Type
Mounting Kits
Model
Mercedes Sprinter (1995-),Volkswagen Crafter (2006-) & MAN TGE (2017-)
Width
Width: 960 mm. Width from the centre of the campervan: 900 mm
Weight
Payload: 60 kg (including bicycle carrier). Own weight: 22 kg
Material
Powder-coated steel
Colour
Black
Vision Vent roof lights are designed with covered ventilation, air cushions to prevent dripping and channels for drainage, condensation is minimised even in unfavourable weather and intensive use of the camper van interior. The aerodynamic design makes travelling more pleasant through lower driving noise and less draught.
Recommended max speed: 80mph / 130 km/h
Key Features
Large dome for rain protection
High UV protection due to tinted dome material
Telescopic display unit, tiltable on four sides, with locking device
Modern interior frame with double pleated blind
Light Colour
White
Brand
MPK
Type
Roof Vent
Height Description
Above roof: 80 mm
Width
Frame: 340mm, Dome: 380mm
Depth
Frame: 365mm, Dome: 395mm
Thickness
Roof: 42-72 mm
Cut Out
280 x 280 mm
Coverage
75cm Squared
Downloads
Visionvent S pro installation
The small Model 42 vent is a space-saving rooflight that provides fresh air in the camper van and, thanks to polypropylene frosted glass, also gentle daylight in the interior. A fold-down mesh frame to guarantee protection from insects and sunlight.
Key Features
Small, space-saving milk glass dome made of polypropylene
Telescopic display unit, tiltable on four sides, with locking device
Folding net frame
Light Colour
White
Brand
MPK
Type
Roof Vent
Height Description
Above roof: 91mm
Width
Frame: 314mm, Dome: 330mm
Depth
Frame: 470mm, Dome: 470mm
Thickness
Roof: 24-56
Cut Out
400 x 400mm
Coverage
150cm Squared
Downloads
Model 42 installation
BLACK CAPRI MIXER WITH PULLOUT SHOWERHEAD
RETRACTABLE SHOWERHEAD (HOSE LENGTH 1.5M), WITH MICROSWITCH
MOUNTING HOLE: 33MM DIA
HEIGHT: 140MM
OUTLET LENGTH: 140 MM
HEIGHT UNDER OUTLET: 88 MM
SUPPLIED WITH 30CM FLEX HOSES WITH JG 12MM FEMALE FITTING
RETAIL PACKED - COMES WITH ALTERNATIVE FITTING
The Peimar OR10H450M is a 450W monocrystalline solar module manufactured in Italy, it is MCS approved and backed by a 30-Year Linear Power Warranty. Suitable for grid-tied PV arrays and eligible for the feed-in tariff in the UK. These large solar panels can also be used for battery charging in off-grid systems where larger power requirements are needed typically liveaboard boats, power failure backup systems, static caravans, off-grid home offices, etc.
For More Additional Information Please click the link below:
PEIMAR - 450W SOLAR PV Additional Information