Quick and easy way to carry all types of watersports gear safely and securely.
Ideal for carrying surfboards, SUPs, sailboards
Boards and boats are well protected during transport with these high density foam pads
Long lasting performance with durable 600D nylon construction with UV resistance
To be used with Thule Locking Straps or Thule Load Straps
Easy on and off with hook and loop closure design along bottom of pads
Integrated no-slip grip on top of pads keeps loads in place
Dimensions
51 x 8 x 8 cm
Weight
0.68 kg
Lockable
✖
Fits Thule WingBar Evo
✓
Fits Thule WingBar
✓
Fits Thule SlideBar
✖
Fits Thule SquareBar
✖
Fits Thule ProBar
✓
Model number
845000
Install or replace all lock cylinders on your Thule products and use the same key for all.
Features
Set of 8 locks, all using the same key
Including grip-friendly Thule Comfort key
Replace the locks in your Thule product in a few easy steps
Technical specifications
Model number
450800
Units per carton
40
Units per pallet
1000
L36-100 Yuasa Leisure Battery 12v 100Ah
Yuasa Leisureline L36-100 12v 100Ah Leisure battery
YuasaPart Number: L36-100Voltage: 12vAmpere-Hour Capacity (20hr Rate): 100Ah
YBX Active Leisure and Marine
Optimised for repeated charging & discharging
Original equipment quality & specification
NCC Verified Class C
Maintenance free
Supplied charged & ready to fit
Enhanced safety features including integrated flame arrestor and carry handle
1200 watt hours
160 cycles
Caravans, motorhomes, boats and other modern leisure vehicles feature more technology and electrical appliances than ever before. YBX Active Leisure and Marine batteries are specially designed to provide dependable, stress-free power and long life.
Caution - when installed in an occupied space, this battery must be fitted with a breather pipe routed to the vehicle exterior.
Tech Spec
Case Type
L5 DIN
Voltage
12V
Capacity at 20-hour Rate (Ah)
100
Cold Cranking Performance (Amps) EN1
900
Mean Weight with Acid (kg)
23.3
Cell Layout
0
Terminal
T1
Recommended Charge Rate (Amps)
5
Handles
Yes
End-Venting
Yes
State of Charge Indicator
Yes
Terminal Type
T1
Length (mm)
353
Width (mm)
175
Height (mm)
190
NCC Class
Class C
Feature Range
Leisure Batteries
Functional bike rack fulfilling all basic needs (for 2 bikes).
Features
Trunk access with bikes mounted, thanks to hand-operated tilt
Quick mounting of bike rack, thanks to the smart tightening handle
Bikes mounted to bike rack via stable frame holders
Fastening of wheels with soft straps
Locks the bike rack to the towbar (lock included) and the bikes to the bike rack with the lockable knob accessory
Technical Specifications
Max number of bikes
2
Load capacity
36 kg
Max bike weight
20 kg
Dimensions
105 x 58 x 75 cm
Folded dimensions
105 x 67 x 25 cm
Weight
14 kg
Fits frame dimensions
22-70 mm
Detachable frame holders
✖
Distance between bikes
17 cm
Carbon frame compatible
✖
Wheel mounting on adjustable holders
Adjustable straps
Tilt function (with bikes)
✓
Fits cars with exterior spare tyre
✖
Rear lights
✓
Power connector
7-pin
One Key System compatible
✓
Lockable bike-to-rack
✓ Adapter/s required: Thule Lockable Knob
Lockable rack-to-vehicle
✓
Model number
941005
Warranty
Thule is dedicated to providing exceptional products that are quality tested and guaranteed against defects in materials and workmanship.
Sigma S34
PLEASE NOTE THE BELOW:
As a insurance requirement a registered Scorpion installer/Dealer has to do the installation. Upon purchase details will be sent to a local installer/dealer in your area installation price dependent on vehicle.
Thatcham Category 2-1 upgrade alarm system, with new radio keys, providing perimeter and ultrasonic interior protection.
Thatcham Category 2 to 1 upgrade alarm system, providing perimeter and ultrasonic interior protection
Supplied with 2 x single button radio keys, self powered siren and tri-coloured status LED
The system has full, in-built, CDL control to power/switch a vehicle’s CDL system
Single immobilisation circuit
Key theft protection facility - only with optional keypad
Auxiliary siren, armed accessory, total closure, interior lamp illumination, headlamp illumination, 2-stage unlock and boot release or remote engine start/stop outputs (separate module required)
Sophisticated programming and diagnostic facility via either the keypad or a CP3 workshop programmer
Security Features
2 x single button radio keys (programmable, water and shock resistant with random 66-bit encryption to prevent scanning and code grabbing. Lost or stolen radio keys can be programmed out)
Perimeter protection circuit for boot and bonnet (negative input)
Perimeter protection circuit for doors (positive or negative input)
Closed loop protection circuit (looped wire to protect accessories, trailers, bike racks etc)
Ignition detection circuit
Ultrasonic interior protection (base sensitivity adjustable, length of disturbance adjustable and automatically adjusts if any movement is detected during the threshold time)
Single immobilisation circuit (18 amp continuous/30 amp max)
Manual arm, using the radio key (or programmable auto arm, which automatically arms the system 60 seconds after the last door is shut - adjustable between 1 and 99 seconds. Auto arm can also be programmed to lock the vehicle if required)
Auto re-arm can be programmed to re-arm the system if a door is not opened within 60 seconds of disarming the system -adjustable between 1 and 99 seconds. Auto re-arm also re-locks the vehicle
A Key theft protection feature can be turned on to prevent the radio keys automatically de-activating the immobilisation when the alarm system is disarmed. In this mode the systems PIN must also be entered into the keypad before the vehicle can be started. This prevents the theft of a vehicle even with the owner’s keys
Last trigger identification via the dashboard LED and a record of the elapsed time since the last trigger can be recalled using the keypad or a CP3 workshop programmer
The total trigger count memory for each individual circuit since the system was installed or the memory re-set is also stored in the system's memory
Additional plug in single stage sensor socket (see optional accessories)
Additional plug in dual stage sensor socket and siren pre-warn facility (see optional accessories)
Secure data linked, self powered siren included
Convenience Features
Full central door locking/unlocking control (with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period)
Armed output (negative 200mA max)
Additional siren/pager output (negative 200mA max)
Total closure output (via holding down the radio key when arming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period – negative 200mA max)
Total open/boot release output (via holding down the radio key when disarming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period – negative 200mA max)
Interior lamp illumination output (negative 200mA max)
Headlamp illumination output (negative 200mA max)
Secure ignition PIN override
Secure PIN override using the keypad
Silent arm and disarm (audible bleeps can be programmed back on, however this will breach current legislation)
The last circuit to trigger can be excluded using the keypad
The vehicle’s battery voltage can be checked using the keypad
The sensors are excludable using the keypad, ignition or remotely with the optional two button radio key
Personal Safety Features
Auto lock can be programmed to lock the vehicle at the start of a journey when the ignition is turned on, and then unlock when the ignition is turned off. This can be excluded on individual occasions
Two stage unlock can be configured to only unlock the driver’s door when the system is disarmed, the remaining doors are only unlocked if the radio key is pressed a second time
Panic feature switched using the radio key and or an optional internal button
S34 Box ContentsS34 alarm ECUECU brackets and fixing screwsS34 alarm installation wiring loom8-wire accessory wiring loomSecure data linked, self powered sirenSiren lead with plug with bonnet switch wireSiren bracket and fixingsTri-colour LED and loomTwo ultrasonic heads, looms and fixingsTwo radio keysOperating instructions and PIN stickersCertificate of installationTwo Sigma window stickersSheet of remaining foil stickers
Optional Accessories
T-TS1
Tilt sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
AS610
Single stage shock sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
AS620
Single zone microwave. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
Dual Stage Sensors
AS625
Dual zone microwave. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
T2SS
Dual stage shock sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
Other
2012054
RF pager
SIGAC22M
2 window closer module
SIGACTBC
Two button radio key conversion kit
Quality and Approvals
Thatcham “Category 2 to 1” approved for passenger cars:
TC2 – 1299/0204
Thatcham “Category L2 to L1” approved for light commercial vehicles:
TUL1-106/0304
EU 95/56 directive (security) and EU 95/54 directive (electrical) – “e” marked: Two year warranty
E1 A-00 0475
Feature table
Feature
S4
S30
S32
S34
Method of Arming
Radio
Radio
OE
Radio
Immobilisation Circuits
1
2
1
1
Key Theft Protection (via Keypad)
Y
Y
Y
Y
Auto-arm Auto-rearm (Passive Arming)
Y
Y
Y
Y
Ignition Detection Circuit (or Internal Panic Button Facility)
Y
Y
Y
Y
Door "+" Protection Circuit
Y
Y
Y
Y
Door "-" Protection Circuit
Y
Y
Y
Y
Combined Boot/Bonnet "-" Protection Circuit
Y
Y
Y
Y
Closed Loop Protection Circuit (or Internal Panic Button Facility)
ACC 8
ACC 8
ACC 8
ACC 8
Ultrasonic Interior Sensors
Y
Y
Y
Y
Additional, Single-stage Sensor Socket
-
Y
Y
Y
Additional, Dual-stage Sensor Socket with Pre-warn Facility
-
Y
Y
Y
Ultrasonic Interior Sensor Disable Facility
Y
Y
Y
Y
Sensor/s Disable Facility:
1= via Keypad (optional)
1
1
1
1
2= via Ign & Radio Key
2
2
2
3= via Ign & Inhibit Input
3
4= remotely via 2 Button Radio Key (optional)
4
4
4
5= remotely via OE repeated arm/disarm
5
Facility to Upgrade to Two-Button Remote
Y
Y
-
Y
In-built Central Door Locking Control (Full)
FULL
FULL
NEG
FULL
Total Closure from Extended CDL Pulse
Y
Y
-
Y
Alarm Armed Output*
ACC 1
ACC 1
ACC 1
ACC 1
Additional Siren / Pager Output**
ACC 2
ACC 2
ACC 2
ACC 2
Total Closure Output*:
ACC 1
ACC 3
-
ACC 3
1= Timed output on every arm.
1 or 2
1 or 2
2= Output whilst button 1 held on arming
2 only
Boot Release / Total Open Output
ACC 2
ACC 4
-
ACC 4
1= Timed output on every arm
1 or 2
1 or 2
2= Output whilst button 1 held on disarming OR
2 only
Remote Engine Start / Stop Output (Additional Module Required)
-
ACC 4
ACC 4
3= When button 1 & 2 held together
or 3
or 3
Interior Light Illumination Output
-
ACC 5
ACC 5
ACC 5
Headlight Illumination Output
-
ACC 6
ACC 6
ACC 6
Second Stage Unlock Output
-
ACC 7
-
ACC 7
Hazard Light Signalling
Y
Y
Y
Y
LED Colour
RED
TRI-COLOUR
TRI-COLOUR
TRI-COLOUR
Trigger Identification Via LED Flash-back
Y
Y
Y
Y
Battery Back-up Data Siren (Thatcham)
-
Y
Y
Y
High-power Audio Siren
Y
-
-
-
External Panic Facility from Remote
Y
Y
-
Y
Ignition Operated PIN Override
Y
Y
Y
Y
Ignition Operated Radio Key Teaching
Y
Y
-
Y
Facility to Connect Keypad
Y
Y
Y
Y
Facility to Connect Keypad / Touch Key Override
Y
Y
Y
Y
*On S4 models only the alarm armed output and the total closure output are mutually exclusive as they both use the acc 1 wire**On S4 models only the aux siren/pager output and the total open/boot release output are mutually exclusive as they both use the acc 2 wire
Thatcham alarm immobiliser Sigma S30, Category 1 system
PLEASE NOTE THE BELOW:
As a insurance requirement a registered Scorpion installer/Dealer has to do the installation upon purchase details will be sent to a local installer/dealer in your area. Installation cost is dependent on vehicle, please enquire
Providing perimeter and ultrasonic interior protection.
Thatcham Category 1 alarm/immobiliser system, providing perimeter and ultrasonic interior protection
Supplied with 2 x single button radio keys, self powered siren, keypad and tri-coloured status LED
The system has full, in-built, CDL control to power/switch a vehicle’s CDL system
Dual immobilisation circuits
Key theft protection facility
Auxiliary siren, armed accessory, total closure, interior lamp illumination, headlamp illumination, 2-stage unlock and boot release or remote engine start/stop outputs (separate module required)
Sophisticated programming and diagnostic facility via either the keypad or a CP3 workshop programmer
Security Features
2 x single button radio keys (programmable, water and shock resistant with random 66-bit encryption to prevent scanning and code grabbing. Lost or stolen radio keys can be programmed out)
Perimeter protection circuit for boot and bonnet (negative input)
Perimeter protection circuit for doors (positive or negative input)
Closed loop protection circuit (looped wire to protect accessories, trailers, bike racks etc)
Ignition detection circuit
Ultrasonic interior protection (base sensitivity adjustable, length of disturbance adjustable, and automatically adjusts if any movement is detected during the threshold time)
2 x circuit, passively setting, immobilisation (18 amp continuous/30 amp max)
Manual arm, using the radio key (or programmable auto arm, which automatically arms the system 60 seconds after the last door is shut – adjustable between 1 and 99 seconds. Auto arm can also be programmed to lock the vehicle if required)
Auto re-arm can be programmed to re-arm the system if a door is not opened within 60 seconds of disarming the system -adjustable between 1 and 99 seconds. Auto re-arm also re-locks the vehicle
A key theft protection feature can be turned on to prevent the radio keys automatically de-activating the immobilisation when the alarm system is disarmed. In this mode the system’s PIN must also be entered into the keypad before the vehicle can be started. This prevents theft of a vehicle even with the owner’s keys
Last trigger identification via the dashboard LED and a record of the elapsed time since the last trigger, can be recalled using the keypad or a CP3 workshop programmer
The total trigger count memory for each individual circuit since the was system installed or the memory re-set is also stored in the system’s memory
Additional plug in single stage sensor socket (see optional accessories)
Additional plug in dual stage sensor socket and siren pre-warn facility (see optional accessories)
Secure data linked, self powered siren included
Convenience Features
Full central door locking/unlocking control (with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period)
Armed output (negative 200mA max )
Additional siren/pager output (negative 200mA max)
Total closure output (via holding down the radio key when arming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period – negative 200mA max
Total open/boot release output (via holding down the radio key when disarming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period – negative 200mA max)
Interior lamp illumination output (negative 200mA max)
Headlamp illumination output (negative 200mA max)
Secure ignition PIN override
Secure PIN override using the keypad
Silent arm and disarm (audible bleeps can be programmed back on, however this will breach current legislation)
The last circuit to trigger can be excluded using the keypad
The vehicle’s battery voltage can be checked using the keypad
The sensors are excludable using the keypad, ignition or remotely with the optional two button radio key)
Personal Safety Features
Auto lock can be programmed to lock the vehicle at the start of a journey when the ignition is turned on, and then unlock when the ignition is turned off. This can be excluded on individual occasions
Two stage unlock can be configured to only unlock the driver’s door when the system is disarmed, the remaining doors are only unlocked if the radio key is pressed a second time
Panic feature switched using the radio key or an optional internal button
This flat air distribution unit blends in nicely with the interior of your motorhome, caravan or panel van. It quietly and efficently moves air in the two directions, front and back. Simply use the remote control supplied with your roof air conditioner to set the desired temperature and blower speed and enjoy a perfect holiday climate in your home away from home.
Flat air distribution unit (just 54 mm H) leaves more headroom in the cabin
Powerful & quiet airflow to the front and rear
simply adjust the direction of the airflow with your fingertips
dust filter can easily be removed for cleaning
W 518 x H 54 X l 579 MM
Weight 3.5 kg
For replacing a PX300 charger with a Sagent PX310 charger in Swift and Auto-Trail models.
This harness allows the PX300 battery charger to be replaced with the PX310 battery charger, when used with EC400+, EC600 & E700 Series Power Systems in Swift and Auto-Trail models.
INSTALL PDF
Technical Support
If you need help or advice about this product we have a Support Team to help with any enquiries you may have 01482 678981.
Thetford Urine Tank Fresh 30910YZ innovative fluid is specially designed for all separation toilets.
• Prevents formation of, and removes urine scale in both tank and tubing
• Provides daily freshness and odour control
• Responsible choice: contains natural lactic acid
• Safe to empty in a septic tank*
• Fresh orange scent
• 780ml
• Bottle made from up to 95% post-consumer recycled plastic
• 1 dose = 60ml = 5 days; 1 bottle = 65 days of freshness
Pairs perfectly with Thetford's Separation Toilet Bowl Cleaner TF-30911YZ and Drying Agent TF-212491 to ensure a thoroughly clean toilet experience wherever you go.
Key Features
Prevents & removes urine scale in tank & tubing
Provides daily freshness & odour control
Responsible choice: contains natural lactic acid
Safe to empty in a septic tank*
Fresh orange scent
780ml
Bottle made from up to 95% post-consumer recycled plastic
1 dose = 60ml = 5 days
1 bottle = 65 days of freshness
Specifications
Unit of Sale
780ml
Brand
Thetford
Size
780ml
Material
95% post-consumer recycled plastic
Application
All seperation toilets
Country of Origin
Netherlands
The 6A Microswitch for Comet Taps is a small but important spare part. It controls the water pump when you turn your tap on or off.
This replacement fits many Comet taps, including: Roma, Parma, Sienna, Capri, Florenz, Modena, Lucca, Como, Ducale, Dauphin, and Nice.
The microswitch comes with a 400mm cable for an easy and secure fit. If your old switch has stopped working, this part will bring back smooth water flow in your caravan, campervan, motorhome, or boat.
Key Features:
6A replacement microswitch for Comet taps
Fits Roma, Parma, Sienna, Capri, Florenz, Modena, Lucca, Como, Ducale, Dauphin, and Nice
400mm cable length
Restores water pump function
Easy to install and reliable
Works with caravans, motorhomes, campervans, and boats