Premium quality rooflight from Remis. This new aerodynamic Rooflight from Remis is for fitting in to 400 x 400 mm apertures. This vent is particularly stylish and has a very low profile. It has a tinted outer lid and has optimised water management. It can be tilted up to 60 degrees and is for roof thicknesses of 28-42mm. It has 3 opening angles and is complete with pleated black out screen and mosquito net. This vent is also with fixed ventilation.
Brand
Remis
Type
Roof Vent
Vision Vent roof lights are designed with covered ventilation, air cushions to prevent dripping and channels for drainage, condensation is minimised even in unfavourable weather and intensive use of the camper van interior. The aerodynamic design makes travelling more pleasant through lower driving noise and less draught.
Recommended max speed: 80mph / 130 km/h
Key Features
Large dome for rain protection
High UV protection due to tinted dome material
Telescopic display unit, tiltable on four sides, with locking device
Modern interior frame with double pleated blind
Light Colour
White
Brand
MPK
Type
Roof Vent
Height Description
Above roof: 80 mm
Width
Frame: 340mm, Dome: 380mm
Depth
Frame: 365mm, Dome: 395mm
Thickness
Roof: 42-72 mm
Cut Out
280 x 280 mm
Coverage
75cm Squared
Downloads
Visionvent S pro installation
The small Model 42 vent is a space-saving rooflight that provides fresh air in the camper van and, thanks to polypropylene frosted glass, also gentle daylight in the interior. A fold-down mesh frame to guarantee protection from insects and sunlight.
Key Features
Small, space-saving milk glass dome made of polypropylene
Telescopic display unit, tiltable on four sides, with locking device
Folding net frame
Light Colour
White
Brand
MPK
Type
Roof Vent
Height Description
Above roof: 91mm
Width
Frame: 314mm, Dome: 330mm
Depth
Frame: 470mm, Dome: 470mm
Thickness
Roof: 24-56
Cut Out
400 x 400mm
Coverage
150cm Squared
Downloads
Model 42 installation
Brevette plastic Rooflight stays for all perspex roof lights (per pair)
Brand
AG
Type
Accessories
Material
Plastic
Colour
White
Primary Construction
Plastic
Used for fitting the following aircon units to Ducato vehicles or
MESTIC ROOFTOP CLIMATE RTA2600
MESTIC ROOFTOP AIRCON RTA2500
ROOFTOP AIRCON RTA2500L BLACK
Can also be used for fitting the following Thule 400 x 400 roof lights
Round ceiling vent 12000 sq mm, OD 217mm diameter collar, 149mm diameter x 37mm deep, to suit a flexible ducting.
Brand
DLS Plastics
Type
Accessories
Size
217mm OD
Material
Plastic
Colour
White
Primary Construction
Plastic
Model 29 is a small vent that provides fresh air in the camper van and, thanks to polypropylene frosted glass, also gentle daylight in the interior. A fold-down mesh frame protects against insects and lets light and air into the interior of the caravan.
Key Features
Small, space-saving milk glass dome made of polypropylene
Telescopic display unit, tiltable on four sides, with locking device
Folding frame with mosquito net
Light Colour
White
Brand
MPK
Type
Roof Vent
Height Description
Above roof: 78mm
Width
Frame: 314mm, Dome: 330mm
Depth
Frame: 314mm, Dome: 330mm
Thickness
Roof: 24-46mm
Cut Out
280 x 280mm
Coverage
60cm Squared
Downloads
Model 29 installation
The VisonStar vented roof lights are flat in design, easy to operate, infinitely adjustable, particularly noise-reducing and ultra-robust. The VisionStar M Vented Rooflight for the cut-out size 400 x 400 mm has an attractive interior frame with double pleated blinds. Smoked polycarbonate rooflight with double glazing which makes the dome robust and impact resistant.
Key Features
Optionally with and without continuous ventilation
Attractive interior frame with double pleated blinds
Steplessly adjustable up to 50°
Very flat rooflight (only 80 mm above roof)
Greatly reduced driving noise and draught
Double-walled frame for better insulation
Continuous ventilation even with pleated blinds closed
High UV protection due to tinted dome material
Tinted Dome
Light Colour
Signal White
Brand
MPK
Type
Roof Vent
Height Description
Above roof: 80mm
Width
Frame: 530mm, Dome: 470mm
Depth
Frame: 565mm, Dome: 490mm
Thickness
Roof: 25 mm – 60 mm
Cut Out
400 x 400mm
Downloads
VisionStar M installation
Panel vans such as the Fiat Ducato, Citroën Jumper or Peugeot Boxer are becoming increasingly popular for conversion to a camper van. With our adapter frames for roof hatches, you can also enjoy the advantages of MPK roof hatches in your van camper. In sizes for the cut-out dimensions 700 x 500 mm, the adapter frames ensure the secure attachment of our corresponding roof hatch models.
Brand
MPK
Height Description
Above roof: 7 mm
Material
Polypropylene
Cut Out
700 x 500 mm
Panel vans such as the Fiat Ducato, Citroën Jumper or Peugeot Boxer are becoming increasingly popular for conversion to a camper van. With our adapter frames for roof hatches, you can also enjoy the advantages of MPK roof hatches in your van camper. In sizes for the cut-out dimensions 700 x 500 mm, the adapter frames ensure the secure attachment of our corresponding roof hatch models.
Brand
MPK
Height Description
Above roof: 7 mm
Material
Polypropylene
Cut Out
700 x 500 mm
The special spoiler assists by channelling the air smoothly around your existing roof light and thereby reducing both wind resistance and noise levels. It is made of UV-resistant ABS plastic. It is easily installed with the roof vent screws or can be attached with suitable adhesives (Sika).
Brand
Fiamma
Type
Accessories