Thatcham CAT2 Passive arming 2 circuit with PIN Override Sterling Touch 2 Light Goods – Vans, Cars – 12V PLEASE NOTE : As an insurance requirement a registered Scorpion installer/Dealer has to do the installation.  Once purchased details for an engineer in your area will be provided with your contact details please enquire for installation fee. The Sterling range of immobiliser systems offer the latest Thatcham & insurance approved products to help protect you and your vehicle. The Sterling immobilisers are built to the latest demanding European standards using cutting-edge technology to deliver new standards in vehicle security. Both the Sterling immobilisers carry a 2 year warranty. VEHICLE SECURITY WITH CUTTING-EDGE TECHNOLOGY 2 Year warranty Thatcham quality assured Cat 2  Touch key immobiliser Sterling Touch 2 A dual circuit electronic immobiliser system with PIN Override that meets the Insurance Approved Thatcham Category 2 Standard  It operates separately from the vehicle’s on-board computer and therefore immune to attack from the OBD port. The system is deactivated by a coded touch-key operating without radio signal transponders therefore it cannot be decoded by RF scanning devices. This system will arm itself in 60 seconds after the ignition is turned off – so you can’t forget to immobilise your vehicle. The system is simple to disarm too – using your coded anti-scan touch key, momentarily place it on a small, discreet dashboard mounted receptacle then start your vehicle. The Sterling Touch 2 is supplied with 2 anti-scan touch keys to disarm the system and a PIN code override as a back-up in case you lose or damage both of your keys. With a staggering rise in ‘electronic vehicle theft’, more and more vehicle owners are seeking a solution that is highly effective in the event of an attempted theft and the peace of mind that gives them when their vehicle is unattended. As an Insurance Approved Thatcham Category 2 product, most major and reputable vehicle insurers will offer owners a premium discount. Depending on the vehicle type, these discounts can be considerable with the annual saving often and easily covering the purchase and installation price of the Sterling Touch 2 system. Touch key operated passive arming 2 circuit engine immobiliser. Thatcham Category 2 immobiliser system, providing dual circuit immobilisation protection Supplied with 2 x coded touch keys Red status LED Security Features 2 x coded touch keys with an excess of 28 trillion different key code combinations available (programmable, water and shock resistant. Lost or stolen touch keys can also be programmed out) Dual circuit immobilisation (18 amp continuous/30 amp max) Passive immobilisation occurs 60 seconds after turning off the ignition Convenience Features Secure four digit PIN code override Passive immobilisation Four touch keys can be programmed in at any one time Visual status LED

Read more less

Sigma Remote Controls   (CASE ONLY) SIGACTBC AN OPTIONAL 2-BUTTON CASE FOR THE SIGMA S-SERIES RANGE OF ALARMS: S1, S4, S30 & S34 Two year warranty

Read more less

*****THESE UNITS ARE NO LONGER SUPPLIED WITH THE PROTECTED BY DATATOOL DECAL BADGE ***** The Datatool Evo is an easy to fit alarm system designed for motorcycles and scooters with a 12v battery. Using a sophisticated movement sensor, the Datatool Evo constantly monitors for signs of unauthorised movement, triggering the loud integrated siren when the movement exceeds the permitted level. The movement sensor can be adjusted via the remote control to one of three levels to customise the alarm to your preference. The Datatool Evo also monitors the battery voltage, triggering the alarm if the voltage rises suddenly indicating the engine has been started and also provides visual notification of a low battery by reducing the flash rate of the deterrent LED. Datatool Features: Transport Mode: Ability to arm without movement sensing if the bike or scooter is being transported. Alarm Diagnostics: If the alarm has triggered whilst you were away, the Datatool Evo will bleep a code to tell you which input caused the trigger. Panic Mode: The ability to trigger the alarm from the remote control Automatic Rearm: With this optional feature enabled, the Datatool Evo will rearm automatically if someone tries to disarm the alarm and the engine isn’t started within 30 seconds. Arm/Disarm Tones: Another optional feature, the Datatool Evo can get programmed to ‘chirp’ on arm and disarm and there are 2 options on the ‘chirp’ volume. Note: Certain countries including the UK require alarms to arm/disarm silently, check legislation for your country. Optional Seat Switch / Luggage Loop: Separate trigger wire. You can combine this with a magnetic seat switch or inline connector to extend the level of protection. Prewired with an inline fuse and terminals ready to connect directly to the vehicle battery The LED is a plug-in connection meaning it does not require soldering to install. ‘Protected by Datatool’ decal to highlight to potential thieves that security is present. Remote control

Read more less

Sigma Remote Control SIGAC110 SUPPLIED WITH ALL LATE REMOTE SIGMA M-SERIES SYSTEMS Two year warranty

Read more less

Sigma S34 PLEASE NOTE THE BELOW: As a insurance requirement a registered Scorpion installer/Dealer has to do the installation.   Upon purchase details will be sent to a local installer/dealer in your area installation price dependent on vehicle. Thatcham Category 2-1 upgrade alarm system, with new radio keys, providing perimeter and ultrasonic interior protection. Thatcham Category 2 to 1 upgrade alarm system, providing perimeter and ultrasonic interior protection  Supplied with 2 x single button radio keys, self powered siren and tri-coloured status LED  The system has full, in-built, CDL control to power/switch a vehicle’s CDL system  Single immobilisation circuit  Key theft protection facility - only with optional keypad  Auxiliary siren, armed accessory, total closure, interior lamp illumination, headlamp illumination, 2-stage unlock and boot release or remote engine start/stop outputs (separate module required)  Sophisticated programming and diagnostic facility via either the keypad or a CP3 workshop programmer  Security Features 2 x single button radio keys (programmable, water and shock resistant with random 66-bit encryption to prevent scanning and code grabbing. Lost or stolen radio keys can be programmed out)  Perimeter protection circuit for boot and bonnet (negative input)  Perimeter protection circuit for doors (positive or negative input)  Closed loop protection circuit (looped wire to protect accessories, trailers, bike racks etc)  Ignition detection circuit  Ultrasonic interior protection (base sensitivity adjustable, length of disturbance adjustable and automatically adjusts if any movement is detected during the threshold time)  Single immobilisation circuit (18 amp continuous/30 amp max)  Manual arm, using the radio key (or programmable auto arm, which automatically arms the system 60 seconds after the last door is shut - adjustable between 1 and 99 seconds. Auto arm can also be programmed to lock the vehicle if required)  Auto re-arm can be programmed to re-arm the system if a door is not opened within 60 seconds of disarming the system -adjustable between 1 and 99 seconds. Auto re-arm also re-locks the vehicle  A Key theft protection feature can be turned on to prevent the radio keys automatically de-activating the immobilisation when the alarm system is disarmed. In this mode the systems PIN must also be entered into the keypad before the vehicle can be started. This prevents the theft of a vehicle even with the owner’s keys  Last trigger identification via the dashboard LED and a record of the elapsed time since the last trigger can be recalled using the keypad or a CP3 workshop programmer  The total trigger count memory for each individual circuit since the system was installed or the memory re-set is also stored in the system's memory  Additional plug in single stage sensor socket (see optional accessories)  Additional plug in dual stage sensor socket and siren pre-warn facility (see optional accessories)   Secure data linked, self powered siren included  Convenience Features  Full central door locking/unlocking control (with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period)  Armed output (negative 200mA max)  Additional siren/pager output (negative 200mA max)  Total closure output (via holding down the radio key when arming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period – negative 200mA max)  Total open/boot release output (via holding down the radio key when disarming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period – negative 200mA max)  Interior lamp illumination output (negative 200mA max)  Headlamp illumination output (negative 200mA max)  Secure ignition PIN override  Secure PIN override using the keypad  Silent arm and disarm (audible bleeps can be programmed back on, however this will breach current legislation)  The last circuit to trigger can be excluded using the keypad  The vehicle’s battery voltage can be checked using the keypad  The sensors are excludable using the keypad, ignition or remotely with the optional two button radio key  Personal Safety Features Auto lock can be programmed to lock the vehicle at the start of a journey when the ignition is turned on, and then unlock when the ignition is turned off. This can be excluded on individual occasions  Two stage unlock can be configured to only unlock the driver’s door when the system is disarmed, the remaining doors are only unlocked if the radio key is pressed a second time  Panic feature switched using the radio key and or an optional internal button  S34 Box ContentsS34 alarm ECUECU brackets and fixing screwsS34 alarm installation wiring loom8-wire accessory wiring loomSecure data linked, self powered sirenSiren lead with plug with bonnet switch wireSiren bracket and fixingsTri-colour LED and loomTwo ultrasonic heads, looms and fixingsTwo radio keysOperating instructions and PIN stickersCertificate of installationTwo Sigma window stickersSheet of remaining foil stickers Optional Accessories T-TS1 Tilt sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors AS610 Single stage shock sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors AS620 Single zone microwave. Plug in sensor. Only for use in addition to the ultrasonic interior sensors Dual Stage Sensors AS625 Dual zone microwave. Plug in sensor. Only for use in addition to the ultrasonic interior sensors T2SS Dual stage shock sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors Other 2012054 RF pager SIGAC22M 2 window closer module SIGACTBC Two button radio key conversion kit Quality and Approvals Thatcham “Category 2 to 1” approved for passenger cars:  TC2 – 1299/0204 Thatcham “Category L2 to L1” approved for light commercial vehicles: TUL1-106/0304 EU 95/56 directive (security) and EU 95/54 directive (electrical) – “e” marked: Two year warranty E1 A-00 0475 Feature table Feature S4 S30 S32 S34 Method of Arming Radio Radio OE Radio Immobilisation Circuits 1 2 1 1 Key Theft Protection (via Keypad) Y Y Y Y Auto-arm Auto-rearm (Passive Arming) Y Y Y Y Ignition Detection Circuit (or Internal Panic Button Facility) Y Y Y Y Door "+" Protection Circuit Y Y Y Y Door "-" Protection Circuit Y Y Y Y Combined Boot/Bonnet "-" Protection Circuit Y Y Y Y Closed Loop Protection Circuit (or Internal Panic Button Facility) ACC 8  ACC 8 ACC 8 ACC 8 Ultrasonic Interior Sensors Y Y Y Y Additional, Single-stage Sensor Socket - Y Y Y Additional, Dual-stage Sensor Socket with Pre-warn Facility - Y Y Y Ultrasonic Interior Sensor Disable Facility Y Y Y Y Sensor/s Disable Facility:                   1= via Keypad (optional)  1 1 1 1           2= via Ign & Radio Key  2 2   2           3= via Ign & Inhibit Input     3             4= remotely via 2 Button Radio Key (optional) 4 4   4           5= remotely via OE repeated arm/disarm     5   Facility to Upgrade to Two-Button Remote Y Y - Y In-built Central Door Locking Control (Full) FULL FULL NEG FULL Total Closure from Extended CDL Pulse Y Y - Y Alarm Armed Output* ACC 1 ACC 1 ACC 1 ACC 1 Additional Siren / Pager Output** ACC 2 ACC 2 ACC 2 ACC 2 Total Closure Output*: ACC 1 ACC 3 - ACC 3           1= Timed output on every arm.   1 or 2   1 or 2           2= Output whilst button 1 held on arming 2 only       Boot Release / Total Open Output ACC 2 ACC 4 - ACC 4           1= Timed output on every arm   1 or 2   1 or 2           2= Output whilst button 1 held on disarming    OR 2 only       Remote Engine Start / Stop Output (Additional Module Required) - ACC 4   ACC 4           3= When button 1 & 2 held together   or 3   or 3 Interior Light Illumination Output - ACC 5 ACC 5 ACC 5 Headlight Illumination Output - ACC 6 ACC 6 ACC 6 Second Stage Unlock Output - ACC 7 - ACC 7 Hazard Light Signalling Y Y Y Y LED Colour RED TRI-COLOUR TRI-COLOUR TRI-COLOUR Trigger Identification Via LED Flash-back Y Y Y Y Battery Back-up Data Siren (Thatcham) - Y Y Y High-power Audio Siren Y - - - External Panic Facility from Remote Y Y - Y Ignition Operated PIN Override Y Y Y Y Ignition Operated Radio Key Teaching Y Y - Y Facility to Connect Keypad  Y Y Y Y Facility to Connect Keypad / Touch Key Override Y Y Y Y   *On S4 models only the alarm armed output and the total closure output are mutually exclusive as they both use the acc 1 wire**On S4 models only the aux siren/pager output and the total open/boot release output are mutually exclusive as they both use the acc 2 wire

Read more less

Alarms, Security, Sigma 12v, Car, Van  

Read more less

Description: 100% Brand new, never usedProximity sensor constructed by shaping and sealing the magnetic spring tube connected with wires. Switching action will occur when a magnetic object is in the proximity. It is usually used as a position sensor is widely used in measuring instruments, office automated equipment, household supplies, security and safety equipment, transportation and transportation equipment. Material: ABS & EpoxySimple installation and adjustmentPanel Mount SensorsNo Standby Power RequirementHermetically Sealed design and long life Applications:Position and Limit SensingSecurity System SwitchDoor switch max contact rating: 10wmax switching voltage: 100v DCmax switching current: 0.5Amin breakdown voltage: 200vdcmax carry current: 1.0Amax contact resistance: 100mΩrelease time: 0.4ms maxoperate time: 1.0ms maxDiameter: 5.6mmlength of sensor (not included the cable ): 30mmlength of cable: 50.5cm  Included in the Package:   2 x Proximity switch

Read more less

Sigma S4  A Non-Thatcham alarm & immobiliser system, providing perimeter and ultrasonic interior protection. PLEASE NOTE THE BELOW: As a insurance requirement a registered Scorpion installer/Dealer has to do the installation upon purchase details will be sent to a local installer/dealer in your area A modular alarm system, providing perimeter and ultrasonic interior protection  Supplied with 2 x single button radio keys, high power audio siren and red status LED  The system has full, in-built, CDL control to power/switch a vehicle’s CDL system  Single immobilisation circuit  Key theft protection facility - only with an optional keypad  Auxiliary siren or boot release output & armed accessory or total closure output  Sophisticated programming and diagnostic facility via either the keypad or the CP3 workshop programmer  Security Features 2 x single button radio keys (programmable, water and shock resistant with random 66-bit encryption to prevent scanning and code grabbing. Lost or stolen radio keys can be programmed out)  Perimeter protection circuit for boot and bonnet (negative input)  Perimeter protection circuit for doors (negative input)  Closed loop protection circuit (looped wire to protect accessories, trailers, bike racks etc)  Ignition detection circuit  Ultrasonic interior protection (base sensitivity adjustable, length of disturbance adjustable and automatically adjust if any movement is detected during the threshold time)  Single immobilisation circuit (18 amp continuous/30 amp max)  Manual arm, using the radio key (or programmable auto arm, which automatically arms the system 60 seconds after the last door is shut - adjustable between 1 and 99 seconds. Auto arm can also be programmed to lock the vehicle if required)  Auto re-arm can be programmed to re-arm the system if a door is not opened within 60 seconds of disarming the system -adjustable between 1 and 99 seconds. Auto re-arm also re-locks the vehicle  A Key theft protection feature can be turned on to prevent the radio keys automatically de-activating the immobiliser when the alarm system is disarmed. In this mode the system's PIN must also be entered into the keypad before the vehicle can be started. This prevents the theft of a vehicle even with the owner’s keys  Last trigger identification via the dashboard LED and a record of the elapsed time since the last trigger can be recalled using the keypad or a CP3 workshop programmer  The total trigger count memory for each individual circuit since the system was installed or the memory re-set is also stored in the system's memory  Convenience Features  Full central door locking/unlocking control (with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period)  Armed output (negative 200mA max) or this can alternatively be used as a total closure output (either via holding down the radio key when arming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period)  Additional siren/pager output (negative 200mA max) or alternatively this can be used as a total open/boot release output (either via holding down the radio key when disarming or for a timed period with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period  Secure ignition PIN override  Secure PIN override using the keypad  Silent arm and disarm (audible bleeps can be programmed back on, however this will breach current legislation)  The last circuit to trigger can be excluded using the keypad  The vehicle’s battery voltage can be checked using the keypad  The sensors are excludable using the keypad, ignition or remotely with the optional two button radio key  Personal Safety Features Auto lock can be programmed to lock the vehicle at the start of a journey when the ignition is turned on, and then unlock when the ignition is turned off. This can be excluded on individual occasions  Panic feature switched using the radio key and or an optional internal button  S4 Box ContentsS4 alarm ECUECU brackets and fixing screwsS4 alarm installation wiring loom3-wire accessory wiring loomSiren with cable incorporating bonnet switch wireSiren bracket and fixingsRed LED and loomTwo ultrasonic heads, looms and fixingsTwo radio keysOperating instructions and PIN stickersCertificate of installationTwo Sigma window stickersSheet of remaining foil stickers Optional Accessories 2012054 RF Pager SIGAC22M 2 window closer module SIGACTBC two button Radio Key conversion kit Quality and Approvals EU 95/56 directive (security) and EU 95/54 directive (electrical) – “e” marked: Two year warranty E1 A-00 0474 Support http://www.scorpionauto.com/PDF/S4.pdf Feature table Feature S4 S30 S32 S34 Method of Arming Radio Radio OE Radio Immobilisation Circuits 1 2 1 1 Key Theft Protection (via Keypad) Y Y Y Y Auto-arm Auto-rearm (Passive Arming) Y Y Y Y Ignition Detection Circuit (or Internal Panic Button Facility) Y Y Y Y Door "+" Protection Circuit Y Y Y Y Door "-" Protection Circuit Y Y Y Y Combined Boot/Bonnet "-" Protection Circuit Y Y Y Y Closed Loop Protection Circuit (or Internal Panic Button Facility) ACC 8  ACC 8 ACC 8 ACC 8 Ultrasonic Interior Sensors Y Y Y Y Additional, Single-stage Sensor Socket - Y Y Y Additional, Dual-stage Sensor Socket with Pre-warn Facility - Y Y Y Ultrasonic Interior Sensor Disable Facility Y Y Y Y Sensor/s Disable Facility:                   1= via Keypad (optional)  1 1 1 1           2= via Ign & Radio Key  2 2   2           3= via Ign & Inhibit Input     3             4= remotely via 2 Button Radio Key (optional) 4 4   4           5= remotely via OE repeated arm/disarm     5   Facility to Upgrade to Two-Button Remote Y Y - Y In-built Central Door Locking Control (Full) FULL FULL NEG FULL Total Closure from Extended CDL Pulse Y Y - Y Alarm Armed Output* ACC 1 ACC 1 ACC 1 ACC 1 Additional Siren / Pager Output** ACC 2 ACC 2 ACC 2 ACC 2 Total Closure Output*: ACC 1 ACC 3 - ACC 3           1= Timed output on every arm.   1 or 2   1 or 2           2= Output whilst button 1 held on arming 2 only       Boot Release / Total Open Output ACC 2 ACC 4 - ACC 4           1= Timed output on every arm   1 or 2   1 or 2           2= Output whilst button 1 held on disarming    OR 2 only       Remote Engine Start / Stop Output (Additional Module Required) - ACC 4   ACC 4           3= When button 1 & 2 held together   or 3   or 3 Interior Light Illumination Output - ACC 5 ACC 5 ACC 5 Headlight Illumination Output - ACC 6 ACC 6 ACC 6 Second Stage Unlock Output - ACC 7 - ACC 7 Hazard Light Signalling Y Y Y Y LED Colour RED TRI-COLOUR TRI-COLOUR TRI-COLOUR Trigger Identification Via LED Flash-back Y Y Y Y Battery Back-up Data Siren (Thatcham) - Y Y Y High-power Audio Siren Y - - - External Panic Facility from Remote Y Y - Y Ignition Operated PIN Override Y Y Y Y Ignition Operated Radio Key Teaching Y Y - Y Facility to Connect Keypad  Y Y Y Y Facility to Connect Keypad / Touch Key Override Y Y Y Y   *On S4 models only the alarm armed output and the total closure output are mutually exclusive as they both use the acc 1 wire**On S4 models only the aux siren/pager output and the total open/boot release output are mutually exclusive as they both use the acc 2 wire

Read more less

Sigma S32 PLEASE NOTE THE BELOW: As a insurance requirement a registered Scorpion installer/Dealer has to do the installation upon purchase details will be sent to a local installer/dealer in your area installation costs depends on vehicle just enquire. The Sigma S Series is designed to work independently as a full remote control system linked to the vehicle’s central door locking, or to interface with the manufacturer’s pre-installed remote locking system. All models are manufactured to the highest European certification standards, including Thatcham approval for the appropriate insurance-approved systems. Utilising the original equipment radio keys, providing perimeter and ultrasonic interior protection Thatcham Category 2 to 1 upgrade alarm system, providing perimeter and ultrasonic interior protection Switched from vehicle’s existing OE remote controls Supplied with self powered siren, and tri-coloured status LED The system has negative lock/unlock outputs to switch negative controlled CDL systems Single immobilisation circuit Key theft protection facility – only with the optional keypad Auxiliary siren, armed accessory, interior lamp illumination and headlamp illumination outputs Sophisticated programming and diagnostic facility via the keypad Security Features Switches securely from the vehicle’s existing OE remote Perimeter protection circuit for boot and bonnet (negative input) Perimeter protection circuit for doors (positive or negative input) Closed loop protection circuit (looped wire to protect accessories, trailers, bike racks etc) Ignition detection circuit Ultrasonic interior protection (base sensitivity adjustable, length of disturbance adjustable, and automatically adjusts if any movement is detected during the threshold time) Single immobilisation circuit (18 amp continuous/30 amp max) Manual arm, using the vehicle’s existing OE remote (or programmable auto arm, which automatically arms the system 60 seconds after the last door is shut – adjustable between 1 and 99 seconds. Auto arm can also be programmed to lock the vehicle if required) Auto re-arm can be programmed to re-arm the system if a door is not opened within 60 seconds of disarming the system -adjustable between 1 and 99 seconds. Auto re-arm also re-locks the vehicle Key theft protection feature can be turned on to prevent the OE radio keys automatically de-activating the immobilisation when the alarm system is disarmed. In this mode the system’s PIN must also be entered into the keypad before the vehicle can be started. This prevents theft of a vehicle even with the owner’s keys Last trigger identification via the dashboard LED and a record of the elapsed time since the last trigger, can be recalled using the keypad The total trigger count memory for each individual circuit since the system was installed or the memory re-set is also stored in the system’s memory Additional plug in single stage sensor socket (see optional accessories) Additional plug in dual stage sensor socket and siren pre-warn facility (see optional accessories) Secure data linked, self powered siren included Convenience Features Negative door locking/unlocking control (with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period) Armed output (negative 200mA max ) Additional siren/pager output (negative 200mA max) Interior lamp illumination output (negative 200mA max) Headlamp illumination output (negative 200mA max) Secure ignition PIN override Secure PIN override using the keypad Silent arm and disarm (audible bleeps can be programmed back on, however this will breach current legislation) The last circuit to trigger can be excluded using the keypad The vehicle’s battery voltage can be checked using the keypad The sensors are excludable using the keypad or repeated arming Personal Safety Features Auto lock can be programmed to lock the vehicle at the start of a journey when the ignition is turned on, and then unlock when the ignition is turned off. This can be excluded on individual occasions Optional Accessories Single Stage Sensors T-TS1 Tilt sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors AS610 Single stage shock sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors AS620 Single zone microwave. Plug in sensor. Only for use in addition to the ultrasonic interior sensors Dual Stage Sensors AS625 Dual zone microwave. Plug in sensor. Only for use in addition to the ultrasonic interior sensors T2SS Dual stage shock sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors Other 2012054 RF pager

Read more less

The 2-Din AVH-Z3200DAB lets you connect to a compatible iPhone or Android phone using a single USB cable, which will allow you to control Apple CarPlay, WebLink and Waze (Via Apple CarPlay) from your dashboard in a convenient and safe way.   Additionally, this car AV player features Bluetooth, allowing you to stream your music or call hands-free over a wireless connection. Upgrade your music with high-grade audio functions: a 13-band graphic EQ, auto EQ and Time Alignment allow you to customise the sound settings to your own preferences.        Main Features Apple CarPlay WebLink Waze   Yes. (via Apple CarPlay) DAB+ Digital Radio Tick Mark Approved product Bluetooth® Spotify Dual Camera Input Multi colour illumination Navigation Ready      Yes. (via Apple CarPlay / AVIC-F260-2, sold separately) FM Radio CD/DVD player DVD Region Code      2 USB Input      1 Camera Input            2 Screen Size     6.2″ Plays Your DVD collection Your CD collection Your iPod, iPhone, Android Smartphone Bluetooth audio Via CD, DVD: MP3, WMA and AAC audio files DivX, MPEG-1,2,4 video files Via USB: MP3, WMA, AAC, WAV and FLAC audio files 264, MKV, FLV and MPEG4 video files in Full HD Mpeg2, DivX video files JPEG image files Customisable Key and Display Illumination Dual Zone Entertainment Accessories Included: 1 x USB extension cable 1 x External Bluetooth mic Optional Accessories: CA-AN-DAB.001 (DAB antenna) CA-IU.52C (USB to Lightning cable) CD-MC20 (Auto EQ microphone) ND-BC8 (Reverse camera)       Screen Features 2″ Clear Type Resistive Touchscreen      Apple Compatibility Works with iPhone Works with iPod Compatible Generations: iPhone 7 / 7 Plus / SE / 6s / 6s Plus / 6 / 6 Plus / 5s / 5c / 5 iPod Touch 6th generation / 5th generation iPod Nano (7th generation) Supported Functions: Battery charging Music playback Siri EYes Free      Connections USB Input      1 Aux-in 1 rear AV Aux-In RCA AV Input 2 RCA AV Rear Output Portable Device Connectivity  Yes via mini-jack RCA Cable (not included) Hard Wired Remote Ready Hand Held Remote Control via optional CD-R33      Audio FLAC 13-band Graphical EQ MOSFET 50 W x 4 Amplifier Graphic Equaliser     13-band Network Mode           3-Way Network Mode Listening Position Selector Auto EQ (Equaliser) Auto TA (Time Alignment) Manual TA (Time Alignment) High Pass Filter Low Pass Filter Subwoofer Control RCA Pre-Outs 3. (Front, rear and subwoofer) High Voltage Output (4Volt) Advanced Sound Retriever      Android Compatibility Compatible with Android Quick Charge for Android      Bluetooth Voice Recognition Hands-free calls Music Streaming Additional Bluetooth Features Music Streaming via A2DP & AVRCP 1.6 Automatic Phone book Transfer 800 entries for each user (20 phones max.) Siri  

Read more less

CDL2W01 Central Door Locking Motors  2 Wire Central Door Locking Motor. All Scorpion products carry a 24 Month Warranty and are backed up with a fully equipped technical department and training facilities to meet today's demanding market.

Read more less

The AVH-Z5200DAB is equipped with a large 6.8-inch Clear Type Resistive multi-touch screen and an intuitive, easy-to-use interface that is similar to your smartphone and fully customisable. Smart drivers can have it all: the AVH-Z5200DAB provides the very best in smartphone connectivity with Apple CarPlay, Android Auto, WebLink™, Dual Bluetooth connection and Spotify Connect. This model also features USB and dual camera inputs, plus a host entertainment features, including DAB+ digital radio. The AVH-Z5200DAB is equipped with a large 6.8-inch Clear Type Resistive multi-touch screen and an intuitive, easy-to-use interface that is similar to your smartphone and fully customisable. Impressive audio control is also available by using the Auto Time Alignment function, Auto EQ, Advanced Sound Retriever, 13 Band Graphic EQ, Specialized Audio Parts and can be connected to an external amplifier via the 3 x RCA Pre-Outs (4v). 6.8″ Clear Type Resistive Touch-Screen More advanced than ever before, Pioneer has introduced a powerful and intuitive touch-screen interface that is easy to use and highly customizable. Beautifully crisp with enhanced visibility, Pioneer now also supports 24-bit True Colour reproduction of up to 16,777,216 colours.      Display Screen Size/Aspect Ratio 6.8″ Touchscreen  Clear Type Resistive LED Backlight Display Off Mode Color Customization  112 Key Colors Display Customization Splash Screens Dimmer Settings (ON/OFF) Brightness Control Home Screen Shortcuts Customization 24-Bit True Colour       Smartphone Integration Apple CarPlay™ (iPhone 5 or later) Android Auto™ Siri® Eyes Free USB Direct Control for iPod/iPhone USB Direct Control for Android smartphone Spotify connectivity (dedicated AV source)      Bluetooth Built-in Bluetooth® Dual Bluetooth® Hands-Free Profile (HFP) Audio/Video Remote Control Profile (AVRCP) Audio Streaming (A2DP) Secure Simple Pairing (SSP) 5 x Phone Memory Pairing      Tuner & Sources AM/FM Tuner DAB+ Digital Radio 24 Presets Best Station Memory (BSM) Local Seek Tuning RDS Supertuner® IIID Digital Media Playback CD/CD-R/RW Playback MP3 Audio Playback Via CD/USB WMA Audio Playback Via CD/USB AAC Audio Playback  Via CD/USB WAV Audio Playback Via USB FLAC Audio Playback Via USB DVD/DVD-R/RW/DVD-Video Playback MPEG-2 Video Playback MPEG-4 Video Playback AVI/DivX Video Playback WMV Video Playback JPEG Photo Slideshow Viewer Full-HD Playback from USB      Audio RCA Preouts 3 Hi-Volt (Front, Rear, Subwoofer) Built-in Amplifier 4 x 50w Built-in Bluetooth® Auto EQ (CD-MC20 required) Customizable Graphic Equalizer 13-Band D/A Converter 16-Bit Time Alignment (CD-MC20 required) Auto Subwoofer Control Listening Position Selector Advanced Sound Retriever Specialised Audio Parts 3-Way Network Mode      Expandability USB Connection SD/SDHC Memory Card Slot AUX Input Rear Camera Input Parking Assist Guidelines Wired Remote Input Composite Video Output Composite AV Input  Audio, Video USB Direct Control for iPod®/iPhone®      General Warranty (must be purchased from a Authorized Pioneer Dealer) 1 Year 2006 CEA Compliant  

Read more less