The Datatool Evo is an easy to fit alarm system designed for motorcycles and scooters with a 12v battery. Using a sophisticated movement sensor, the Datatool Evo constantly monitors for signs of unauthorised movement, triggering the loud integrated siren when the movement exceeds the permitted level. The movement sensor can be adjusted via the remote control to one of three levels to customise the alarm to your preference.
The Datatool Evo also monitors the battery voltage, triggering the alarm if the voltage rises suddenly indicating the engine has been started and also provides visual notification of a low battery by reducing the flash rate of the deterrent LED.
Datatool Features:
Transport Mode: Ability to arm without movement sensing if the bike or scooter is being transported.
Alarm Diagnostics: If the alarm has triggered whilst you were away, the Datatool Evo will bleep a code to tell you which input caused the trigger.
Panic Mode: The ability to trigger the alarm from the remote control
Automatic Rearm: With this optional feature enabled, the Datatool Evo will rearm automatically if someone tries to disarm the alarm and the engine isn’t started within 30 seconds.
Arm/Disarm Tones: Another optional feature, the Datatool Evo can get programmed to ‘chirp’ on arm and disarm and there are 2 options on the ‘chirp’ volume. Note: Certain countries including the UK require alarms to arm/disarm silently, check legislation for your country.
Optional Seat Switch / Luggage Loop: Separate trigger wire. You can combine this with a magnetic seat switch or inline connector to extend the level of protection.
Prewired with an inline fuse and terminals ready to connect directly to the vehicle battery
The LED is a plug-in connection meaning it does not require soldering to install.
‘Protected by Datatool’ decal to highlight to potential thieves that security is present.
Remote control
THESE UNITS ARE NO LONGER SUPPLIED WITH THE PROTECTED BY DATATOOL DECAL BADGE
Enhance your campervan or motorhome with Vamoose Multi Rails designed for Thule and Fiamma awnings. These versatile rails provide a secure and stylish solution for mounting awnings, offering both practicality and durability. Ideal for outdoor adventures, the rails are crafted to fit a wide range of vehicles with ease. For optimal awning support, order Part No. DV100—the custom awning bracket designed to perfectly fit the Combi Rail. Upgrade your setup today for a seamless and reliable camping experience."
Use this additional bracket kit when fitting an awning longer than 3.0m to a multi rail using the DV100 Adapter Kit
CENTRE BRACKET KIT FOR DV100 KIT
DOWNLOAD TIPS FOR BRACKET
Safety Net -PLEASE SELECT CORRECT SIZE
Luton Safety Net. To secure Luton of motorhome
1500 mm x 580 mm
Material : Aluminium/textile
Luton Safety Net. To secure Luton of motorhome
1800 mm x 580 mm
Material : Aluminium/textile
**Windscreen Mount and 3m Sticky pad only**
The new Wireless Windscreen Mount for the new Road Angel Pure One.
This amazing accessory allows you to mount your new Road Angel Pure to the windscreen.
With its slick and compact design, the windscreen mount takes up very little space and with no wires, allows you to apply it almost anywhere on the windscreen for an ideal setup for you.
Slick and Compact Design
The windscreen mounts compact and efficient design allows for less obstruction of the road ahead while securely holding your Road Angel Pure to a view that suits you.
Pack comes with x1 sticky pad (one fixed on the bracket)
No wireless charging* No cable included
The product will have an aperture resembling a micro USB port, this will not be useable and will have no electronic components.
Images for Guidance only, main contact point is modified for Pure One
Replacement Wire Rack/Shelf – 3001102 for FO5010 Oven
The 3001102 Wire Rack/Shelf is a genuine replacement part designed specifically for the CAN FO5010 oven. Made from strong, chrome-plated wire, this shelf is built to withstand high cooking temperatures while providing a safe and steady surface inside the oven. Its simple design allows it to slot directly into the oven’s built-in runners, making it quick and easy to install without any tools or adjustments.
This replacement rack is ideal if your original shelf is bent, damaged, or missing. It restores your oven’s full cooking capacity, ensuring that dishes sit level for even cooking and grilling. The open-wire design allows heat to circulate freely around food, improving cooking performance and efficiency.
The 3001102 rack can also be used as an additional shelf, giving you extra space for baking trays, roasting dishes, or cookware when preparing larger meals. Its durable finish is easy to clean, helping you maintain hygiene and keep your oven in good condition.
Whether you’re replacing a worn part or adding more flexibility to your FO5010 oven, the 3001102 Wire Rack/Shelf is a practical and reliable solution that keeps your appliance working at its best.
Omni-directional antennas 360 26 dB UHF - 9 dB VHF- B3
MINI antenna (just 31 cm diameter) specially designed to receive UHF channels. A special configuration of the circuit combined with a high gain amplifier enables reception of VHF B3 programmes too.
Equipped with LTE Suppressor Filter to eliminate any disturbance caused by new 4G Smartphones. (Only for countries that have already incorporated LTE transmissions in the 800 MHz band).
Gain with amplifier:
CH 5-12 9 dB / CH 21-69 26 dB
Power supply: 12/24 Volts - 230 Volts
Diameter: 31 cm
Height: 16.5 cm
Weight: 1 kg
Package contents
1 Antenna, complete with 5 m coaxial cable and 3 F connectors
1 Adjustable gain amplifier, with 2 outputs for 2 TV sets, powered at 12, 24 and 230 Volts
Amplifier available separately
Bike rack with adjustable platform for easy loading and unloading.
Features
Stable and solid attachment to the rear wall of a motorhome or caravan
Ideal for e-bikes - load capacity up to 50 kg
Can bridge a distance of 70 cm in height to have easy access to the platform
The base can be lowered and raised by using a crank or motor, making the installation of the bikes effortlessly
The platform lock creates excellent dynamic force control and perfectly secures your bikes during transport. The platform is locked manually and can easily be clicked in the upwards position when not in use. The lifting frame is nice and tight during the ride thanks to integrated safety straps
The adjustable wheel holders make sure you can almost fit any bike on the bike rack, from mountain bikes to children's bikes
Lockable bike holders with a key to secure and lock your bikes on the carrier
Carriers can be extended up to 3 bikes. Set for 3rd bike is sold separately
Elongation Kit available to allow higher installation, 95-150cm
Adapter available to allow installation to pre-fitted bottom mounting rail, 302000
Technical Specs
Compatibility: Motorhomes / Caravans
Mounting location: Rear wall
Load capacity for bikes: 2 (3)
Max bike weight: 30 kg
Max weight capacity: 50 kg
Lockable platform: Manual
Lockable bike-to-rack -
Total width: 131 cm
Height: 70 - 95 cm
Depth: 70 - 120 cm
Weight: Manual 17 kg, 12v 18.1 kg
We offer professional installation @ our workshops based in Bristol Uk
2-3 three hour wait time
2-3 days lead time from making appointment to completed install
Appointment Only
Authorised Thule dealer
Just choose a packet
Please click the link below to see Thule Lift V16 Instructions
Thule Lift V16 bike carrier Fitting Instructions
The handrail with the double function.
Features
A sturdy and easy-to-fit handrail ideal for your motorhome or caravan
The Thule Security Handrail has a unique double-locking design for ultimate security
In the open position, it offers a sturdy grab handle to help you get in and out of your vehicle and in its locked position it folds across the door giving added visible security
The same handrail can be used for left or right opening doors
The frame is screwed into the side of the wall.
When there is no space inside the vehicle to fit the mounting plates, order the door frame kit (requires a 5mm gap between door & frame)
Solid powder-coated aluminium
NB. The Short Version is advised for vehicles with a lower entry door. For vehicles with a higher entry door, the standard Thule Security Handrail is advised.
Please note handle is not supplied with door frame kit sold separately. 308893
Provide a more secure fastening between the awning fabric and the tension or blocker rafter to prevent the unpleasant noise of a flapping awning fabric due to wind
Just click it on the rafter, put the fabric in between and tighten with the handle
Use up to two clamps on one side of the awning
Fits: Oval rafter from G2 Blocker sides, Tension Rafter G2, Support Arms for Thule Omnistor 1200
Content: 2 Clamps
The PX310 (replacement for PX300) is a 300W 3-stage intelligent battery charger and power supply with LCD display.
The PX310 multi-stage battery charger is designed for leisure vehicle applications, providing power for both battery charging and 12 volt appliances.
The integrated LCD display shows battery charging status and allows setup for different battery chemistries.
A PSU mode allows the charger to be used without a battery fitted and the Silent mode avoids noise during overnight charging.
Supplied with connecting cables
Power - 300W (max)
Input voltage range - 200 - 240VAC
Charging Current - 20A @14.5V (max)
Boost Voltage - 14.7V (max)
Float Voltage - 13.8V (max)
Compatible batteries - Flooded, Gel, AGM, Lithium
Battery size - 70 - 220Ah
Cooling method - Intelligent fan with Silent Mode
Dimensions (LxWxH) - 221 x 157 x 69mm
Weight - 1.55kg
DOWNLOAD USER GUIDE
DOWNLOAD DATASHEET
