Thatcham CAT2 Passive arming 2 circuit with PIN Override
Sterling Touch 2
Light Goods – Vans, Cars – 12V
PLEASE NOTE :
As an insurance requirement a registered Scorpion installer/Dealer has to do the installation.
Once purchased details for an engineer in your area will be provided with your contact details please enquire for installation fee.
The Sterling range of immobiliser systems offer the latest Thatcham & insurance approved products to help protect you and your vehicle. The Sterling immobilisers are built to the latest demanding European standards using cutting-edge technology to deliver new standards in vehicle security. Both the Sterling immobilisers carry a 2 year warranty.
VEHICLE SECURITY WITH CUTTING-EDGE TECHNOLOGY
2 Year warranty
Thatcham quality assured Cat 2
Touch key immobiliser Sterling Touch 2
A dual circuit electronic immobiliser system with PIN Override that meets the Insurance Approved Thatcham Category 2 Standard
It operates separately from the vehicle’s on-board computer and therefore immune to attack from the OBD port. The system is deactivated by a coded touch-key operating without radio signal transponders therefore it cannot be decoded by RF scanning devices.
This system will arm itself in 60 seconds after the ignition is turned off – so you can’t forget to immobilise your vehicle. The system is simple to disarm too – using your coded anti-scan touch key, momentarily place it on a small, discreet dashboard mounted receptacle then start your vehicle.
The Sterling Touch 2 is supplied with 2 anti-scan touch keys to disarm the system and a PIN code override as a back-up in case you lose or damage both of your keys.
With a staggering rise in ‘electronic vehicle theft’, more and more vehicle owners are seeking a solution that is highly effective in the event of an attempted theft and the peace of mind that gives them when their vehicle is unattended.
As an Insurance Approved Thatcham Category 2 product, most major and reputable vehicle insurers will offer owners a premium discount. Depending on the vehicle type, these discounts can be considerable with the annual saving often and easily covering the purchase and installation price of the Sterling Touch 2 system.
Touch key operated passive arming 2 circuit engine immobiliser.
Thatcham Category 2 immobiliser system, providing dual circuit immobilisation protection
Supplied with 2 x coded touch keys
Red status LED
Security Features
2 x coded touch keys with an excess of 28 trillion different key code combinations available (programmable, water and shock resistant. Lost or stolen touch keys can also be programmed out)
Dual circuit immobilisation (18 amp continuous/30 amp max)
Passive immobilisation occurs 60 seconds after turning off the ignition
Convenience Features
Secure four digit PIN code override
Passive immobilisation
Four touch keys can be programmed in at any one time
Visual status LED
The fabric slides into the awning lead rail
All panels can be rolled up and are fixed with a side release buckle
The Thule Rain Blocker G2 panels can be combined with smart connections
Durable fabric material: top quality PVC
TECHNICAL SPECIFICATIONS
Compatibility
Most Vehicles
Materials
Transparent PVC-fabric
Weight
2 kg
Front privacy panel for Thule awnings to protect against wind and rain.
The Thule Rain Blocker G2 panels can be combined with smart connections
The fabric slides into the awning lead rail
Durable fabric material: top quality PVC
Many possibilities to combine other panels
1.85m height only to be used with minivan sides 306515 & 301339
2.10m height only to be used with small sides 307400 or 307291 & 1200 Side panel 301422
2.30m height to be used with Medium, Large, XL, XXL, Caravan & Van Side Panels
Please note you will need a unique combination of fronts if you are wanting to make a full length panel so suit the length of your awning.
eg. 5200 4.50m with large sides. Front panel required combination 1 x F, 1 x G & 1 x I
Please refer to the PDF document which gives more information on these combinations.
Download the PDF Document HERE
Please See Fitting Instruction Down Below:
Thule Rain Blocker G2 Front Fitting Instructions
Additional Information
ADAPTER SET FOR MERC SPRINTER 2007> 2025 & VW CRAFTER 2007-18
Please click the PDF link for more info and installation instructions.
USE ADDITIONAL ADAPTER (1500602723) WHEN FITTING 4.0M> AWNING
XLWB L4 (7.35M) = 4.50M
Thule 6300/6200
Please click the PDF link for more info and installation instructions.
A rubber that ensures that the gap between the vehicle and the wall awning is sealed when using a flat adapter.
Suitable for the wall-mouunted awning. Thule Omnistor series 5 & 8 Width 8cm
Available in cut length of 4.0m or 30mtr roll.
Complete fitting and plumbing kit for our 63-litre and 90-litre Underslung Water Tanks for VW Crafter and MAN TGE FWD vehicles.
Kit contents:
3 x Underslung Crafter FWD brackets
6 x M8 x 16mm socket head screws
15 x 5.5 x 25mm TEK screws
3/4" BSP x 20mm hosetail
3/4" x 20mm 90 degree hosetail
1" x 20mm 90 degree hosetail
1 Roll PTFE tape
Brand
Wydale Plastics
Model
USK90C
Height Description
90mm
Width
665mm
Depth
135mm
Weight
2.7kg
Country of Origin
United Kingdom
Integrated and protected LED for optimal visibility of the footboard.
Features
Retrofit installation on Thule Slide-Out Steps V18 or V19
IP67 - protected for dust infiltration and water jets
Flexible LED strip of 700mm included, to be cut to the right length
Endcaps and alu front profile included
For the installation of LED lights on roof awnings Thule Omnistor 6300/6200/9200.
Features:
An aluminium profile fits into the opening of the bottom of the awning cassette
The LED light can be used both when the awning is opened or closed
Perfect bike rack to transport two e-bikes on the A-frame.
Designed for the installation on the A-Frame
Ideal for e-bikes with a load capacity up to 60 kg
Easy to load thanks to lowered platform
The adjustable wheel holders make sure you can almost fit any bike on the bike rack, from mountain bikes to childrens bikes
Perfect setting thanks to adjustable bike wheel fixations with pump buckles
Easy mounting of bikes through detachable bike arms with lockable Thule AcuTight torque limiter knobs that click when optimal torque is reached
Lockable platform: prevents your bikes from moving during transport, it locks manually
We provide locks and a lockable system that reduce the risk of theft but will not constitute a guarantee against risk of product being stolen
Tech specifications
Compatibility
Caravans
Mounting location
Caravan A-Frame
Load capacity for bikes
2 (3)
Max bike weight
30kg
Max weight capacity
60kg
Max tire width
2.75"
For e-bikes
Distance between bikes
28cm
Sliding rail in depth
Sliding rail left-right
One Key System compatible
Total width
130 cm
Height
85 cm
Depth
57 cm
Weight
10kg
Colour
Black
Model number
302031
PDF MANUAL
An adapter to enable safe transport of bikes with carbon frames.
Features
The fixation pressure is distributed over a large surface area to minimize risk of frame damages
It fits all types of frame geometries and is easily adjustable with no loose parts
The adapter has a soft TPE rubber liner to avoid scratching the bike frame
Only to be used with Thule bike racks with a torque limiter knob (e.g. Thule ProRide, Thule EasyFold)
Related Products Thule Easyfold XT, Thule WanderWay2, Thule ProRide
Technical specifications
Model number
984101
Units per carton
40
Units per pallet
2000
Popular lock fitted to many motorhomes.
Complete with steel mechanism and striker barrel
For installation on doors with thickness of 28-34mm
Barrel & Key sold separately - LV961001
LH Version = Hinges on Left of door, if looking from outside
Install or replace all lock cylinders on your Thule products and use the same key for all.
Features:
Including grip-friendly Thule Comfort key
Set of 4 locks, all using the same key
Replace the locks in your Thule product in a few easy steps
Set of 6 locks, all using the same key
Including grip-friendly Thule Comfort key
Replace the locks in your Thule product in a few easy steps
Set of 8 locks, all using the same key
Including grip-friendly Thule Comfort key
Replace the locks in your Thule product in a few easy steps
Set of 12 locks, all using the same key
Including grip-friendly Thule Comfort key
Replace the locks in your Thule product in a few easy steps
Set of 16 locks, all using the same key
Including grip-friendly Thule Comfort key
Replace the locks in your Thule product in a few easy steps
Model number
450600
Units per carton
40
Units per pallet
1000
Warranty
Thule is dedicated to providing exceptional products that are quality tested and guaranteed against defects in materials and workmanship.
The CAN 3000410 Right-Hand Glass Lid is a genuine replacement part designed for use with the FL1401 and FL1402 units. Built from tough, heat-resistant tempered glass, this lid restores both the function and modern look of your appliance. Over time, glass lids can become scratched, cracked, or broken, which affects safety, hygiene, and convenience. Replacing your damaged lid with this authentic CAN spare part ensures continued safe use and a factory-fresh appearance.
This right-hand glass lid provides full coverage and protection for the hob when closed, keeping burners safe from dust, dirt, and accidental damage. It also doubles as a smooth, flat worktop surface, giving you extra preparation space in compact kitchens such as caravans, motorhomes, and boats. When opened, the lid is designed to stay securely positioned, providing easy and safe access to the hob beneath.
Manufactured to original specifications, the CAN 3000410 lid guarantees a perfect fit for the FL1401 and FL1402 models. Installation is straightforward with compatible hinges, making this part a quick and cost-effective solution for restoring your unit’s safety, functionality, and professional finish.
Key Benefits:
Genuine CAN spare part for FL1401 and FL1402 units
Restores safety by replacing cracked or broken glass lids
Protects the hob when closed and helps keep it clean
Provides extra worktop space in compact kitchens
High-quality tempered glass for strength, durability, and heat resistance
Easy to install with existing hinges and fittings
Cost-effective solution to extend the life of your appliance