Products under £150

Approximately 30,000 starts Sealed tip/tilt double lid - Reduces water loss by up to 30% VDA roll over test compliant* Calcium/Calcium plates Integrated carrying handle & flame arrestor State of Charge Indicator (SOCI) OE Quality. Performance & Specification Performance Up to 20% increase in cranking power TECH SPEC Case Type L5 Voltage 12V Capacity at 20-hour Rate (Ah) 95 Cold Cranking Performance (Amps) EN1 850 Mean Weight with Acid (kg) 22.5 Cell Layout 0 Terminal T1 Recommended Charge Rate (Amps) 6 Handles - Yes End-Venting -Yes State of Charge Indicator -Yes Terminal Type T1 Length (mm) 353 Width (mm) 175 Height (mm) 190 NCC Class -N/A Feature Range YBX3000 SMF Batteries

Read more less

Approximately 30,000 starts Sealed tip/tilt double lid - Reduces water loss by up to 30% - VDA roll over test compliant* Calcium/Calcium plates Integrated carrying handle & flame arrestor State of Charge Indicator (SOCI) OE Quality, Performance & Specification Performance Up to 20% increase in cranking power. Case Type LB4 Voltage 12V Capacity at 20-hour Rate (Ah) 80 Cold Cranking Performance (Amps) EN1 720 Mean Weight with Acid (kg) 18.3 Cell Layout 0 Terminal T1 Recommended Charge Rate (Amps) 4 Handles Yes End-Venting Yes State of Charge Indicator Yes Capacity Ah (20-HR) 80 Terminal Type T1 Length (mm) 317 Width (mm) 175 Height (mm) 175 NCC Class N/A Feature Range YBX3000 SMF Batteries

Read more less

Up to 30,000 engine starts For vehicles with standard power demands Extra plates for higher starting power Rollover proof lid for extra safety  Yuasa YBX® conventional automotive batteries are: Original equipment (OE) quality, performance & specification Fully maintenance free Supplied charged & ready to fit Designed with enhanced safety features including integrated flame arrestor & carrying handles Tech Specifications Case TypeL3Voltage12VCapacity at 20-hour Rate (Ah)76Cold Cranking Performance (Amps) EN1680Mean Weight with Acid (kg)18Cell Layout0TerminalT1Recommended Charge Rate (Amps)4HandlesYesEnd-VentingYesState of Charge IndicatorYesWater LossW3Charge RetentionC2VibrationV2EnduranceE1Capacity Ah (20-HR)76Terminal TypeT1Length (mm)278Width (mm)175Height (mm)190NCC ClassN/AFeature RangeYBX3000 SMF Batteries

Read more less

The VisonStar vented roof lights are flat in design, easy to operate, infinitely adjustable, particularly noise-reducing and ultra-robust. The VisionStar M Vented Rooflight for the cut-out size 400 x 400 mm has an attractive interior frame with double pleated blinds. Smoked polycarbonate rooflight with double glazing which makes the dome robust and impact resistant. Key Features Optionally with and without continuous ventilation Attractive interior frame with double pleated blinds Steplessly adjustable up to 50° Very flat rooflight (only 80 mm above roof) Greatly reduced driving noise and draught Double-walled frame for better insulation Continuous ventilation even with pleated blinds closed High UV protection due to tinted dome material Light Colour Signal White Brand MPK Type Roof Vent Height Description Above roof: 80mm Width Frame: 530mm, Dome: 470mm Depth Frame: 565mm, Dome: 490mm Thickness Roof: 25 mm – 60 mm Cut Out 400 x 400mm   Downloads VisionStar M installation

Read more less

The VisonStar roof lights are flat in design, easy to operate, infinitely adjustable, particularly noise-reducing and ultra-robust. The VisionStar M Rooflight for the cut-out size 400 x 400 mm has an attractive interior frame with double pleated blinds. Smoked polycarbonate rooflight with double glazing which makes the dome robust and impact resistant. Key Features Optionally with and without continuous ventilation Attractive interior frame with double pleated blinds Steplessly adjustable up to 50° Very flat rooflight (only 80 mm above roof) Greatly reduced driving noise and draught Double-walled frame for better insulation Continuous ventilation even with pleated blinds closed High UV protection due to tinted dome material Light Colour Signal White Brand MPK Type Roof Vent Height Description Above roof: 80mm Width Frame: 530mm, Dome: 470mm Depth Frame: 565mm, Dome: 490mm Thickness Roof: 25 mm – 60 mm Cut Out 400 x 400mm   Downloads VisionStar M installation

Read more less

LOOP RECORDING AT 1440p Distortionless Quad HD VideoWith a new standard of quality, reliability and personalisation options, the Halo Drive packs a mighty punch in its compact body. Dash Cameras have never looked so good or been so easy to operate. Unobtrusive while driving, its rotatable lens, and discrete wiring means you can capture remarkable full 2K(1440p) QHD footage. Connect to your mobile phone through built-in Wi-Fi, watch a real-time video preview on your Smartphone and download it if an accident happens.GET THE FULL PICTURE 140° Wide Angle Anti-Distortion LensSeeing is believing! The Halo Drive supports 1440p Quad HD loop recording to produce a sharpness of imagery that amazes - 78% higher than that of 1080p. A compact size and no monitor means no distraction.EYES OPEN WHEN YOURS ARE CLOSED Parking ProtectionProtection even when parked! Thanks to the Halo Drive's built-in Parking Mode your vehicle is protected when you're away. After 15 minutes of inactivity the Halo Drive will automatically enter Parking Mode in time-lapse. If the G-Sensor detects an event or movement the Halo Drive will resume normal recording.Specifications:FEATURES: Parking mode, Auto start, Microphone, Auto OverwriteRECORDING: Full HD 2560x 1440p (30 fps)VIEWING ANGLE : 140°MEMORY: Up to 128gb SDHC (sold separately)SOUND: Mono SpeakerCONNECTIVITY: Micro USB / USB-C(coming soon) , WiFiIMAGE SENSOR : CMOSPOWER INPUT : 12v Micro USBWhat's Included in the BoxRoad Angel Halo Drive Quad HD Dash Cam, USB power cable, Dual USB power adapter, 3M adhesive, InstructionsDownloads User Manual

Read more less

This Sunshine Solar Controller features the latest MPPT charge regulation for reliable and economical battery charge control along with a Bluetooth Adapter for setting and monitoring your solar power system. MPPT Solar controllers (Maximum Power Point Tracking) can intelligently regulate the working voltage of solar panels, letting the solar panels always work at Maximum Power Point of V-A curve. Compared with ordinary solar controllers, this MPPT controller can increase the efficiency of PV modules by 10% to 30%. This Solar Charge Controller comes with a Bluetooth Adapter that allows basic reprogramming such as battery type selection along with full monitoring of the solar panel power and state of charge of your battery bank via an iOS / Android app or desktop computer. The app also allows control over the load beneficial for setting timers for lighting applications.  This series of controllers can effectively prolong the lifecycle of batteries, significantly improve the system performance, and give all-round electronic protections, including overcharging and over-discharge protection to minimize damage to system components caused by incorrect installation or system failure, this effectively ensures a safer and more reliable solar power system. Solar Controller Features Product Codes: TRIRON3210N and BLE-RJ45-D MPPT function Bluetooth (with included adapter) Compatible with lead acid & lithium-ion batteries 5VDC dual USB outputs Built-in display Optional 2m wired remote display Microprocessor controller pulse width modulation (PWM) charging Overload protection Overcharge protection Short circuit protection Lightning protection Reverse discharge protection Reverse polarity connection protection Under voltage protection Rated battery voltage 12/24vdc RJ45 communication port for optional remote meter   Solar Controller Specifications Max Rated Charging Current: 30 amps Max Rated Load Current: 30 amps Rated Solar Charge Power: 390 Watts @ 12V - 780 Watts @ 24V Max. PV Array Power: 780W / 12V - 1560W/24V Max Input Voltage: 100Vdc MPPT Efficiency: 99.5% Self Consumption: ≤14mA/12V - ≤15mA/12V System Voltage: 12V/24V Auto-set Working Temperature: -35° to +55° Battery Selection: Gel, Sealed, Flooded, Lithium-ion Enclosure: IP30 Temperature Compensation: -30mV/°C/12V @ 25°C Control Mode: MPPT Charging Max PV Wire Size: 6mm² Dimensions: 158mm x 238.3mm x 62.7mm Weight: 1.35kg  For more info please download the links below. Datasheet 1 Datasheet 2

Read more less

The galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc.   The isolator is installed directly behind your boat's 230V connection. The forward voltage from the galvanic isolator is higher than the potential difference between metals. As a result, this voltage will not allow conduction and as such, the galvanic isolator will prevent any electrolytic current. However, if there is a (higher) error voltage in the AC circuit, the diodes will allow current through and the residual-current device will break the circuit. Description Galvanic Isolator Waterproof (potted)  Maximum current: 16 A  Peak current (20 ms): 1600 A  Connection: M6  Heat sink Material Anodized aluminium  Protection category: IP 67  Weight: 1 kg  Dimensions: (hxwxd)  60 x 120 x 200 mm  Warranty: 2 Years  Layout: RH+ Features of the - Victron Energy Galvanic Isolator VDI-16 The galvanic isolator prevents electrolytic corrosion. It blocks low voltage DC currents that enter your boat via the shore power earth wire. These currents can cause corrosion to the boat’s underwater metals, like the hull, propeller, shaft and so on. The galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc.   The isolator is installed directly behind your boat's 230V connection. The forward voltage from the galvanic isolator is higher than the potential difference between metals. As a result, this voltage will not allow conduction and as such, the galvanic isolator will prevent any electrolytic current. However, if there is a (higher) error voltage in the AC circuit, the diodes will allow current through and the residual-current device will break the circuit.

Read more less

The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Description The SmartShunt is a battery monitor. It measures battery voltage and current. Based on these measurements it calculates state of charge, time to go and keeps track of historical data, such as deepest discharge, average discharge and number of cycles.  The SmartShunt connects via Bluetooth to the VictronConnect App.  The VictronConnect App is used to read out all monitored battery parameters and is also used to make or change settings.  Alternatively, the SmartShunt can connect to a GX device, like the ColorControl GX or the Cerbo GX.  The SmartShunt has an auxiliary input that can be used to monitor the voltage of a second battery or to monitor the midpoint of a battery bank.  The auxiliary input can also be used for battery temperature monitoring together with the optional Temperature sensor for BMV.  Pdf 

Read more less

A remote on-off switch for the Skylla-TG Charger.

Read more less

PIN482510400 - Victron Inverters allow you to power domestic equipment – requiring 230V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC. Features of the - Victron Phoenix Sine Inverter 48V 250VA -230V VE.Direct - UK VE.Direct communication port The VE.Direct port can be connected to:   A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable:     Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level   Monitoring: In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. DC connection with screw terminals No special tools needed for installation. PRODUCT CODE: PIN482510400 For more info, please Click The Link Below: Additional Information  

Read more less

This inverters allows you to power domestic equipment - requiring 230V AC - using 'leisure' or 'automotive' batteries rated at 24V DC. Victron Phoenix Inverters are built to last. They feature sophisticated full-bridge and toroidal transformer topology - which is suitable for powering sensitive electronics. They are overload, temperature, and short-circuit protected. Description Manufacturer : Victron Energy Output Wave Form : Pure Sine Wave Voltage (V) : 24 Continuous Power (W) : 200 Peak Power (W) : 400 Continuous Output Power (VA) : 250 Features VE.Direct communication port  The VE.Direct port can be connected to: • A computer (VE.Direct to USB interface cable needed)  • Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) • UK Type Socket Fully configurable:  • Low battery voltage alarm trip and reset levels  • Low battery voltage cut-off and restart levels  • Dynamic cut-off: load dependent cut-off level  • Output voltage 210 - 245V  • Frequency 50 Hz or 60 Hz  • ECO mode on/off and ECO mode sense level  Monitoring:  • In- and output voltage, % load and alarms  Proven reliability  The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.  High start-up power  Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.  ECO mode  When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.  Remote on/off  A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.  LED diagnosis  Please see manual for a description.  To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Pdf

Read more less