Thinkware Dashcam U1000 1CH Hardwire 32GB

Motion Detection

Monitor and capture any motion around the vehicle for potential vandalism attempts.

Impact Detection

Monitor any impact to the vehicle while it is parked to catch any hit-and-run driver in the act while you are away.

TIME LAPSE PARKING MODE

Catch any potential bumps, scrapes and other incidents by recording footage from your vehicle when you are not nearby. Timelapse mode records at 2 frame per second (FPS) to reduce the size of the video file. This allows the dash cam to record longer than other dash cams whilst in parking mode.

ENERGY SAVING MODE 2.0

The improved energy mode further reduces power consumption and provides even longer video recording than our original energy-saving and parking modes. When you are away from your car for an extended period of time, energy saving parking recording is a recommended solution. When in use, the device will go to sleep and after an impact has been detected by the built-in G-sensor, it will wake up within a second and start recording for the next 20 seconds.

THINKWARE RADAR

Add the optional radar to access even more from your camera’s parking mode. With energy-saving mode, the dashcam will enter sleep mode when in parking mode. When the radar detects motion, the dashcam will power back up. If an impact is then detected, the camera will then save a 20-second clip (10 seconds before impact and 10 seconds after impact) and store this for viewing. If no impact is detected the unit will simply power back down to save your vehicle’s battery.

BUILT-IN GPS ANTENNA

SAFETY CAMERA ALERTS

Get audio warnings from your cash cam when approaching a wide variety of road safety cameras*.
Thinkware Dash Cams provides active alert for these 5 types of road safety cameras while still recording videos.

*UK speed camera (Cyclops) database with regular free updates

RED LIGHT WARNING SYSTEM

SPEED CAMERA WARNING SYSTEM

RED LIGHT & SPEED CAMERA WARNING SYSTEM

AVERAGE SPEED WARNING SYSTEM

MOBILE ZONE WARNING SYSTEM

ADVANCED DRIVER ASSISTANCE SYSTEM (ADAS)

FORWARD COLLISION WARNING SYSTEM
(FCWS/ UFCWS)

Warns the driver of impending road hazards.

FRONT VEHICLE DEPARTURE WARNING
(FVDW)

Informs the driver of the vehicle ahead starting to move.

LANE DEPARTURE WARNING SYSTEM
(LDWS)

Detects if the vehicle is veering off the driving lane.

GPS MAPPING

With GPS, all Thinkware dash cams can record the vehicle’s driving speed and provide its precise location and routes identification on the map. The GPS Tracker helps you to accurately assess the details of the surrounding area. The PC/Mac viewer can then provide you with the vehicle speed and the time of a collision, and the severity of any impacts.

PC / MAC VIEWER

The intuitive and simple-to-use interface of Thinkware Dash Cam allows you an easy and convenient viewing of your recorded videos. Through PC or Mac viewer, you can playback and download recorded videos. You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the viewer.

WIDE DYNAMIC RANGE

Avoid overexposure in your Dash Cam footage when experiencing sources of bright light whilst driving, keeping your footage clearer.

Wide Dynamic Range (WDR) is technology that allows the dashboard camera to capture a clearer image in a strongly contrasted environment. It can solve problems such as intense contrasts of light sources. In the event of a sudden change in frontal light exposure, such as when driving into or out of a tunnel or driving directly into bright sunshine, the Wide Dynamic Range function will eliminate excessively bright spots on the recordings.

MULTIPLE RECORDING MODES

CONTINUOUS RECORDING MODE

This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.

INCIDENT RECORDING MODE

The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.

MANUAL RECORDING MODE

Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.

FAIL-SAFE RECORDING

In the event that the power gets disconnected after an accident, the fail-safe recording uses the Super Capacitor for backup power to ensure safe storage of any recording in progress.

FORMAT FREE TECHNOLOGY

Avoid corrupt memory cards and the slow process of having to reformat your SD Cards with the free flowing recording system.

One of the most common issues with a Dash cam’s reliability is the SD card, these cards are continuously overwritten and often become corrupt if not formatted often. This normally means that you have to remove the SD card and put it into a computer to reformat it. Thinkware have overcome this vulnerability by making the dashcam pre-allocate the memory, avoiding the need to format the SD card on a regular basis and making the footage easily viewable on our Thinkware viewer software.

HIGH-TEMPERATURE PROTECTION SYSTEM

Protects your dashboard camera from overheating and causing potentially irreversible damage to it or its data.

The specially designed heat discharge construction and the built-in thermal sensor of the dash cam protects the device and its data against intense heat by automatically turning it off to prevent overheating. All Thinkware cameras use a Super Capacitor, designed with Temperature Protection, for an emergency power source in the event of a crash or sudden power loss, allowing the unit to save the last 10 seconds of an incident

REAR CAMERA

Designed to be mounted inside the vehicle on the rear window facing out. A 156° wide-angle lens captures all footage from behind the vehicle in 2K QHD detail. A great enhancement to parking mode.