{"product_id":"copy-of-phoenix-smart-ip43-charger-12v-30a-1-1-230v-1","title":"Phoenix Smart IP43 Charger 12V\/50A (1+1) 230V","description":"\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003cp\u003eWith boat owners in mind this adaptive 5-step charger can provide 30A of charge. The Phoenix 1+1 model provides 3A to the starter battery, the rest to the ‘house’ bank. Bluetooth enabled, you can monitor the charger and set alarms straight from your phone. Adaptive, intelligent, dynamic charge features.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures of the -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePhoenix Smart IP43 Charger 12V\/30A 1+1 outputs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBluetooth Smart enabled\u003c\/strong\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAny Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhoenix Smart (1+1): two outputs to charge 2 battery banks\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eThe second output, limited to approximately 3A and with a slightly lower output voltage, is intended to top up a starter battery.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAutomatic voltage compensation \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases. Please see the manual for details. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eThe Phoenix Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe right amount of charge: variable absorption time\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eWhen only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery will be fully charged. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreventing damage due to excessive gassing: the BatterySafe mode\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eIf, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLess maintenance and aging when the battery is not in use:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eThe Storage Mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the Storage Mode float voltage is reduced to 2,2 V\/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso charges Li-ion (LiFePO₄) batteries \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCharger on-off control can be implemented by connecting a relay or open collector opto coupler output from a Li-ion BMS to the remote on-off port. Alternatively, full control of voltage and current can be achieved with Bluetooth. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFully programmable charge algorithm\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eThe charge algorithm can be programmed with the help of Bluetooth or the VE. Direct interface. Three pre-programmed algorithms can be selected with the mode button (see specifications). \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRemote on-off\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eThe remote on\/off consists of two terminals: Remote H and Remote L. A remote on\/off switch or relay contact can be connected between H and L. Alternatively, terminal H can be pulled high, or terminal L can be pulled low. See the manual for details. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVE.Direct interface\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eFor a wired data connection to a Colour Control panel, PC, or other devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgrammable relay\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eCan be programmed using the VE.Direct interface or a Bluetooth-enabled device to trip on an alarm or other events.\u003c\/p\u003e\n\u003cp\u003eFor more info please download this link\u0026gt;\u0026gt;\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1889\/8263\/files\/Datasheet-Blue-Smart-IP22-Charger-180-265-VAC-EN_78a7a386-348e-4696-a8bb-584283a910da.pdf?v=1701360722\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ePdf\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Sunshine Solar","offers":[{"title":"Default Title","offer_id":40729809223769,"sku":"PSC125051085","price":462.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1889\/8263\/products\/phoenix-smart-ip43-charger-12v50a-11-230v-209773.jpg?v=1768886324","url":"https:\/\/laevp.co.uk\/products\/copy-of-phoenix-smart-ip43-charger-12v-30a-1-1-230v-1","provider":"Letang Auto Electrical Vehicle Parts ","version":"1.0","type":"link"}